Got me an MPT
-
For the feature-obsessed like myself; another variant of the MPT. Based on the changes I believe this is the latest model made before discontinuation.
Differences between my other MPT:
1.) Round fasteners/rivets at the plier pivots instead of the hex bolts. Not sure if these are rivets since they are so uniform and clean but who ever heard of round bolts?


2.) The file is ground for a large flathead driver at the end and has the fine/coarse sides reversed. This is the same file model as benner's black oxide version below but his lacks the other differences.


3.) The awl has a nailnick inplace of the cut-out, has more severe angles on the cutting edges and has the cutting edges reversed from the earlier version.


4.) The lanyard ring and large flathead implements are replaced by a thick and a thin washer. This may be due to the new awl design being incrementally thicker than the old.

5.) The cutouts for the backsprings are shorter and less refined than earlier. I did not note a difference in the amount of lock pressure though.

6.) The plier tips are thinner. This may be a simple production variation not specific to this model but the finishes between the two are also different enough that I suspect this was a concious change.

7.) Miscellaneous; the overall finish and the finishes on some of the implements are much different but I'm not sure if this is counts.
So far I think that is 4 different variants. The easily seen features that seperate them:
A.) Scallops on only one side of the handles. "Shoulders" on the handles at the plier pivots.
B.) Scallops on both sides of the handles.
C.) Scallops on both sides of the handles, black oxide finish.
D.) Scallops on both sides of the handles, no lanyard ring or large flathead driver, round fasteners at the plier pivots. -
Great pics Spoon, thanks for sharing.
Does anyone know how long the MPT was in production for? I thought that it wasn't particularly long, but with all these variables I am beginning to think it was produced for longer than I thought.

-
Hmmm, no idea how long the MPT was in production. ???
There are indeed more variables out there than I'd ever suspected! Take those handle cutouts for instance. Looking very closely, you can see that the longer ones were cut with a milling machine. (An expensive process for sure).
Whereas the model with shorter cutouts was stamped out of the sheet metal that way, then was formed into a channel shape.
I would wager a considerable amount of money that the long-cutouts model came first, followed by the short-cutouts model after Gerber retooled their stamping dies.

-
Only you would notice that Bob. :P Interesting thing to point out though. It looks like this could have run for a few years then ??? I can't imagine changes to production like these happening that quickly.
-
-
if i remember right,when i bought my rk62 bayonet army knife mentioned on other thread,i got this gerber catalogue that i might have somewhere still,mpt´s were in it and those...plierbased....i just cant remember..hmm.
well anyway i was so sad since i didnt have the money to buy mpt and rk62,both of them,and i choosed rk62 and just drooled that catalogue.
-
@Tarrodemierda said:
if i remember right,when i bought my rk62 bayonet army knife mentioned on other thread,i got this gerber catalogue that i might have somewhere still,mpt´s were in it and those...plierbased....i just cant remember..hmm.well anyway i was so sad since i didnt have the money to buy mpt and rk62,both of them,and i choosed rk62 and just drooled that catalogue.
Any possibility you could post a picture or a scan of te MPT catalogue page?
-
yep if i find that old cat,i have quite few outdoor/weapon/gear/knife catalogues from last....almost twnety years around.
if i find it and go to someone who has a scanner,ill post it or email to you.
-
@Tarrodemierda said:
if i remember right,when i bought my rk62 bayonet army knife mentioned on other thread,i got this gerber catalogue that i might have somewhere still,mpt´s were in it and those...plierbased....i just cant remember..hmm.well anyway i was so sad since i didnt have the money to buy mpt and rk62,both of them,and i choosed rk62 and just drooled that catalogue.
Good job someone has sent you one ey. :D
-
I don't know how you could bear to be parted from it :D
-
Your's was a tad loose as I recall :D
-
:D
-
first thing tomorrow is to call to my girlfriend back at home and ask her has my BO(hey im learning these shortened things) MPT arrived :D
-
@Tarrodemierda said:
first thing tomorrow is to call to my girlfriend back at home and ask her has my BO(hey im learning these shortened things) MPT arrived :DWell?
-
nope,but ill keep waiting ;)
the only parcel ive got is some odd package from hong kong,but i sure as H-ll havent ordered anything from hong kong recently.
-
@Tarrodemierda said:
nope,but ill keep waiting ;)the only parcel ive got is some odd package from hong kong,but i sure as H-ll havent ordered anything from hong kong recently.
Perhaps we were just lucky on the quick postage last time.
-
i think so.but im sure the pack will arrive someday.
ive been huntin for that kydex to make two sheaths atleast(you know what :D for),but here they dont even know the kydex name in plastic shops >:(
-
@Tarrodemierda said:
i think so.but im sure the pack will arrive someday.ive been huntin for that kydex to make two sheaths atleast(you know what :D for),but here they dont even know the kydex name in plastic shops >:(
A kydex sheath would be sweet!

It might be worth giving Dunc a shout to see if his mate can help.
-
Got me an MPT indeed today.
i like the NO-nonsense simple design a lot.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login