My works
-
Looks excellent to me Kiak.

-
Glad that you like them :)
Next one is zone tempered Lauri 95 mm blade. For the handle i used maple burl and birch bark It is most beautiful knife that i have and I love it. Made a finish type sheath for it.
http://prikachi.com/images/958/4360958T.jpg
http://prikachi.com/images/590/4532590K.jpg
There was a photo contest with topic "Winter blades" and I made it to second place with this picture:

-
The little Lauri 42SS was already shown in another thread but I think, that it belongs here :)

I made it a simple leather sheath and it become very practical neck knife

-
@kiak said:
Glad that you like them :)Next one is zone tempered Lauri 95 mm blade. For the handle i used maple burl and birch bark It is most beautiful knife that i have and I love it. Made a finish type sheath for it.


There was a photo concurs with topic "Winter blades" and I made it to second place with this picture:

:o Yes that is beautiful

Just out of curiosity do the birch bark discs get glued on when you put the knife together or does the 'butt' (if that's the right word) hold it altogether?

-
The "big" brother - Lauri 63SS. For the handle I used the same rotten oak that I used on Lauri 42.
I already sold this knife.



-
The last one for now is another 95 mm Lauri.

Handle was made of walnut and brass
-
Beautiful work! Aside from the gorgeous knives, I love the simplicity of the last sheath you made.
(the Lauri 42SS)
Very nice work, and thanks for sharing it with us. -
Lovely scandi,s mate

-
Thanks :) I'm trying to do my best.
As magentus mention simple sheaths here is one that I made for Alox Classic and gifted the knife to a friend:


-
Very nice work, I especially love your choice in materials :)
-
@sparky415 said:
Just out of curiosity do the birch bark discs get glued on when you put the knife together or does the 'butt' (if that's the right word) hold it altogether?
They are glued - I put little Epoxy on the ceter of the disks.
-
Just out of curiosity do the birch bark discs get glued on when you put the knife together or does the 'butt' (if that's the right word) hold it altogether?

They are glued - I put little Epoxy on the ceter of the disks.
Thank you

-
While looking for pics of Buck knives for another tread I run over this:


Sheath for Buck 525 Gent, shaped around the knife, and the first letter of my girlfriend's name embossed.
-
After a long delay it is time to show you a new knife.
The blade is Saami 105. For the handle i used birch bark and walnut. The handle isn't finished - needs more sanding and I have to repair a hidden defect.For now - enjoy the pics :)




-
@kiak said:
The little Lauri 42SS was already shown in another thread but I think, that it belongs here :)
I made it a simple leather sheath and it become very practical neck knife

cat call!!!!! THAT'S HOT!

i feel kinda daft for asking, but bear with me, how is the handle done like that? isn't rotten oak very soft?
-
The wood is very soft. I put few coats of superglue and sand them up to 2000. For small handles like this it is more than enough.
-
it's gorgeous.
admittedly i wouldn't have the faintest clue how to replicate if someone forced me to at gun point but that only adds to the appeal.
the link in your sig doesn't seem to be working correctly
thanks
-
Thanks for the signature note. It should be ok now. Be adviced, that the blog is in Bulgarian!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login