Does such a thing exist?
-
thanks guys.
I turned my garage over last night looking for it one last time but no luck so i went with the amazon option in the end 65GBP delivered.
This is also sure to make my old one magically re-appear!Sent from my GT-I9100 using Tapatalk
-
@Jammybstard said:
thanks guys.I turned my garage over last night looking for it one last time but no luck so i went with the amazon option in the end 65GBP delivered.
This is also sure to make my old one magically re-appear!Sent from my GT-I9100 using Tapatalk
That sounds about right. ::) Ah well, it's better by far to have two Wave's rather than none. :D
-
thanks guys.
I turned my garage over last night looking for it one last time but no luck so i went with the amazon option in the end 65GBP delivered.
This is also sure to make my old one magically re-appear!Sent from my GT-I9100 using Tapatalk
That sounds about right. ::) Ah well, it's better by far to have two Wave's rather than none. :D
That's true, glad you got one sorted, pics when you get it

-

I bloody knew that would happen!
and down the back of the sofa too!
fate waited until I'd spent the extra ££ on the optional belt clip before revealing it's whereabouts. Fate is cruel.Sent from my GT-I9100 using Tapatalk
-
I bloody knew that would happen!
and down the back of the sofa too!
fate waited until I'd spent the extra ££ on the optional belt clip before revealing it's whereabouts. Fate is cruel.Sent from my GT-I9100 using Tapatalk
Top notch swap fodder however!

-
I bloody knew that would happen!
and down the back of the sofa too!
fate waited until I'd spent the extra ££ on the optional belt clip before revealing it's whereabouts. Fate is cruel.Sent from my GT-I9100 using Tapatalk
Pleased you found your other Wave
those darn sofas feed on anything but at least you gotta spare now 
-
Bloody hell I've lost it again!
Of course I have a spare now but if I loose that one I won't have any left! (compulsive somthing or other the doctors call it;-) ).
So anyway I found a Leatherman Charge Ti (the old one not the new TTi) apparently in as new condition. £50. I should get it tomorrow. It looks like a Wave just with different scales. Is this the case? -
Okay, this is probably late, and I have no idea if it's even out yet, or appropriate for your needs, but I saw this today when I was checking out Gerber's home page.
http://www.gerbergear.com/Industrial/Tools/Cable-Dawg-Tool_30-000399
-
@Jammybstard said:
Bloody hell I've lost it again!
Of course I have a spare now but if I loose that one I won't have any left! (compulsive somthing or other the doctors call it;-) ).
So anyway I found a Leatherman Charge Ti (the old one not the new TTi) apparently in as new condition. £50. I should get it tomorrow. It looks like a Wave just with different scales. Is this the case?Broadly; yes. It also has a different blade steel on the plain edge knife. £50 is a great UK price, if they have more than one do let me know, OK? :D
-
@Heinz Doofenshmirtz said:
Okay, this is probably late, and I have no idea if it's even out yet, or appropriate for your needs, but I saw this today when I was checking out Gerber's home page.http://www.gerbergear.com/Industrial/Tools/Cable-Dawg-Tool_30-000399
That disaster of a tool runs around $300. There is a thread here somewhere about someone who bought it and wasnt impressed.
-
@Heinz Doofenshmirtz said:
Okay, this is probably late, and I have no idea if it's even out yet, or appropriate for your needs, but I saw this today when I was checking out Gerber's home page.
http://www.gerbergear.com/Industrial/Tools/Cable-Dawg-Tool_30-000399
That disaster of a tool runs around $300. There is a thread here somewhere about someone who bought it and wasnt impressed.
Ah, okay... another home-run from Gerber, eh?
-
@Heinz Doofenshmirtz said:
Okay, this is probably late, and I have no idea if it's even out yet, or appropriate for your needs, but I saw this today when I was checking out Gerber's home page.
http://www.gerbergear.com/Industrial/Tools/Cable-Dawg-Tool_30-000399
That disaster of a tool runs around $300. There is a thread here somewhere about someone who bought it and wasnt impressed.
That looks pretty nasty. There's nothing worse than badly made crimp tools. They wreak havoc. especially cheap RJ45 crimps.
I've really fallen in love with the LM wave layout for work day EDC. I struggle to think of any way of improving it to be honest. I even like the scissors.Sent from my GT-I9100 using Tapatalk 2
-
Lets be fair, we have only had one bit of poor feedback on the tool, doesn't mean that everyone is going to dislike it.
-
I will also add that the one bad review we have seen was rectified when Gerber replaced the defective tool.
-
@Gareth said:
Lets be fair, we have only had one bit of poor feedback on the tool, doesn't mean that everyone is going to dislike it.I do a fair bit of cable making and im a tool nut so I looked into it a bit (before I knew it was 300 bucks) and other reviews had the same findings. Basically cool idea, cost 200 dollars more than dedicated tools, and doenst work. This guy found the same issue of the RJ45 crimper failure.
http://www.itstactical.com/digicom/comms/field-testing-the-gerber-cable-dawg/
"Perhaps the bigger point is that three tools that just work cost nearly $225 less than the single tool that kind of works."
-
I own the gerber cable dawg. It appears to be built really well but since I don't use it I can't say. What we need is for Bob to make some of those side cutter heads :)

-
Lets be fair, we have only had one bit of poor feedback on the tool, doesn't mean that everyone is going to dislike it.
I do a fair bit of cable making and im a tool nut so I looked into it a bit (before I knew it was 300 bucks) and other reviews had the same findings. Basically cool idea, cost 200 dollars more than dedicated tools, and doenst work. This guy found the same issue of the RJ45 crimper failure.
http://www.itstactical.com/digicom/comms/field-testing-the-gerber-cable-dawg/
"Perhaps the bigger point is that three tools that just work cost nearly $225 less than the single tool that kind of works."
Well I will fully admit his findings are mixed, but I do still think "disaster" is a little harsh. What we can fully agree on though is that $300 is a heck of a lot of anyone's money. :D
-
Lets be fair, we have only had one bit of poor feedback on the tool, doesn't mean that everyone is going to dislike it.
I do a fair bit of cable making and im a tool nut so I looked into it a bit (before I knew it was 300 bucks) and other reviews had the same findings. Basically cool idea, cost 200 dollars more than dedicated tools, and doenst work. This guy found the same issue of the RJ45 crimper failure.
http://www.itstactical.com/digicom/comms/field-testing-the-gerber-cable-dawg/
"Perhaps the bigger point is that three tools that just work cost nearly $225 less than the single tool that kind of works."
Well I will fully admit his findings are mixed, but I do still think "disaster" is a little harsh. What we can fully agree on though is that $300 is a heck of a lot of anyone's money. :D
Yes, I'll concede that the price is what made me not look at the tool seriously (and negatively compared to similar non multi tools), and I have never tried one. So I cant give an opinion as a user, just as a consumer in a browsing around mode.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login