Farmer Key Ring Wiggle
-
@Mike, Lord of the Spammers! said:
I've got a few Farmers and none of mine wiggle

You could always send it in to Vic to have it repaired mate if its niggling you too much

If it's not the norm that they wiggle then I will happily just buy a second one, this one can just be my every day Farmer and I will use the other one as my outdoors Farmer. I just didn't want to use it as my outdoors one with the wiggle because I will be pulling it out of my pocket every time I need it by the lanyard, which would continue to stress the key ring attachment. It's not a huge deal to me, definitely not enough to bother sending it in. Looks like I'll have to put in an order for my second Farmer soon :D
Now that's a positive outlook on things. A+ good man. :D
-
@captain spaulding said:
Now that's a positive outlook on things. A+ good man. :DThanks, I've been around knives long enough to know that no matter what brand it is not every single piece leaves the factory perfect, heck who knows it could have even been bumped around through all of the shipping it has endured. Either way, doesn't really affect the function and that's what SAK's are to me; pure, high value function (with a touch of nostalgia). Maybe part of me knew that I was going to end up buying another one at some point anyways haha.
-
Your right they all can't be spot on from the factory. Another Farmer is never a bad thing either.

-
For what it's worth.. I really prefer it when you get the eyelet as an extention of a backsrping instead of the thinner version on the liner. The thicker one on the spring is a lot more comfortable in your hand, the thinner one almost feels sharp to me.
-
Do you mean wiggle as in rotates on the pin a little, or wiggle side to side? If you mean rotates slightly on the pin, all of the new ones Ive bought are like that. Probably 60 or so in the last few months and they are all like that. Maybe they move about 1mm or so. I don't have any older ones to compare it to, but the fit up is for sure not tight on the new ones. When I put in the Titanium key ring spacers on customs I try to make sure they have no wiggle.
-
@Syph007 said:
Do you mean wiggle as in rotates on the pin a little, or wiggle side to side? If you mean rotates slightly on the pin, all of the new ones Ive bought are like that. Probably 60 or so in the last few months and they are all like that. Maybe they move about 1mm or so. I don't have any older ones to compare it to, but the fit up is for sure not tight on the new ones. When I put in the Titanium key ring spacers on customs I try to make sure they have no wiggle.That's exactly how mine acts. You get a very slight arcing movement on the pin, nothing at all sideways.
Tbh, makes me want to grind it off completely since I don't use a lanyard on that knife anyawy. :P
-
It's normal. It is a spacer plate that is only held in by the pin, so there will always be some degree of rotational movement. Some are just held tighter than others.
Here is a pic of one without the keyring lug.

-
It is not a side to side, it is rotating on the pin. If it is a common problem, will it's range of movement continue to increase or is it already moving as much as it's ever going to?
-
@TweezersAndAToothpick said:
It is not a side to side, it is rotating on the pin. If it is a common problem, will it's range of movement continue to increase or is it already moving as much as it's ever going to?I haven't noticed them increase, its pretty much the same.
I think the only way to make it 100% solid and never move would be to rivet that piece to the liner beside it. Ive toyed with the idea, but then it didn't seem worth the effort and I've just accepted that's how they are. If I remake springs I'm going to make some 93mm ones with a keyring nub as part of the spring as Id like that better anyhow.
-
that´s very common in 84mm saks as well

-
It's common but not a "problem"...just part of the design. The L shaped portion sits under the end of the backspring...there is a small clearance there so that the spring fully contacts the tang of the blade and not the spacer.
You should probably know there's a built in vertical wiggle on the main blade of the 111mm linerlocks too :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login