Skinth Shields!
-
@lowtech said:
So i guess i should have waited until the whole shield gang was ready to be ordered... The M, while being a very good sheath is a bit big for my spirit yet a bit short for my Gerber MP 600 - But i guess I´ll take the usual way around here to solve the problem - Order a smaller one for teh Spirit and a bigger one for the 600 sooner or later.Pair a pen in it or something in the front. The 2" nylon was a perfect fit for it.
-
I guess a Spirit will be a hair to fat to fit into an "S" shield?!
It's too tall. 4.25". Width wise it's not bad. Just too tall.
Hmmm, 4.13'' actually. Eric have you tried fitting a Spirit in there? If the S can accommodate the wider New Wave, I think it should easily also fit the slimmer but somewhat taller Spirit... :-\
-
i just tried and no dice.
The new Wave is a REALLY tight fit. If I adjusted the pattern to fit a Wave, the SAKs would be too loose. The SAK is a little lose already.
I just got a 20 Anni Black Wave and it's also a very tight fit...the New Wave is actually thinner (but wider) than the old wave.
-
Must buy Skinth
Must buy Skinth
Must buy Skinth

-
@Metropolicity said:
i just tried and no dice.The new Wave is a REALLY tight fit. If I adjusted the pattern to fit a Wave, the SAKs would be too loose. The SAK is a little lose already.
I just got a 20 Anni Black Wave and it's also a very tight fit...the New Wave is actually thinner (but wider) than the old wave.
Oh well, it was worth a shot. So the best bet is an M, plus it gives you reason to buy more toys to fit in it. Nawt wrong with that.
:D -
Will my TTi fit it
Sent from my LG-P925 using Tapatalk 2
-
@Hypnos3510 said:
Will my TTi fit itSent from my LG-P925 using Tapatalk 2
TTI - M-Shield Yes
TTI - S-Shield No -
Okay good
Sent from my LG-P925 using Tapatalk 2
-
Mine is no longer on my belt, it was just a bit too visible attracted more attention than the Vic sheath, I'm not sure why, the black is a bit more gloss maybe and it is slightly larger and looks cool with the snaps. I don't want it noticed so... new plan...
HOWEVER; I'm still using it, I'm in the process of reworking my EDC bag as I really liked using the Noatak and decided to try and see if it could replace my Sitka for EDC office duty as well. 2-days in new roll and it is working well.
I've never really been a belt sheath person, but the Spirit is so awesome I can't leave home without it.... so right now my Skinth is attached to the outside of my Noatak with my Spirit. Having the clip is convient because it make is very quick to transfer from the pack to my belt as needed. Pictures later in another thread of my Noatak/Pouch setup for EDC.
-
Just got mine in today and i absolutely love it!!! Very nice craftsmanship.
Sent from my LG-P925 using Tapatalk 2
-
Aaargh!
It has happened again.
I just wanted a new sheath for my Spirit. Now that i have the really nice M -shield, I´m looking for something to fill the spare room. I am thinking about either getting a pen or a light or a mini ratchet to fill the gap beside the spirit.Any ideas on items of these kinds that are about as long as the spirit?
ATM my EDC pen is an Uni Ball Power Tank. It´s cheap and will write upside down and in the wet. Sadly, It´s longer than the Spirit.
My Maglite solitaire (yes, it´s outdated, but not so much with the nice LED Drop in) is a bit short and will slip too far into the Skinth.
Any ideas if the Vic ratchet might fit beside? Anybody owns this Combo and cares to do a pic?I did already order a flat prybar/wrench tool for the front pocket that might prove useful when holding a nut and tightening/loosening a bolt with the spirit.
Sorry for getting OT.
-
You need to get a Space Bullet Pen, with the clip super glued on. It fits PERFECTLY next to the Spirit.
If you are rocking a BO Spirit, it comes in blank Tini coating.
As for tools for the front, a Pirahana fits nearly perfectly, but a Pocket Wrench 2 is a cheaper alternative.
-
Vic Alox Solo ;)
-
Thanks for the info. I´ll keep my eyes open for a bullet space pen, but until now i was not willing to spend that much on a Pen anymore. I used to buy Lamy and Rotring Pens and they got lost or "borrowed" away. But maybe i`ll bite the bullet and try to hang on to that pen like i do with my Multi.
My Spirit is the shiny version.
I Did not find a Pocket wrench in Germany and th Piranha seems a bit thick, isnt it?
For now i bought a cheap Chinese one piece tool.
It has a few Metric holes to hold nuts while (un)fastening them with the tool and fits the pouch nicely (although it´s a bit short so i will have to put a lanyard on)
Man, this forum had me buy more stuff than i thought....
But on the other hand, now i have a nice Gerber MT 600 and a Spirit with fitting pouch so i can rotate my EDC tools a bit...
-
@lowtech said:
Thanks for the info. I´ll keep my eyes open for a bullet space pen, but until now i was not willing to spend that much on a Pen anymore. I used to buy Lamy and Rotring Pens and they got lost or "borrowed" away. But maybe i`ll bite the bullet and try to hang on to that pen like i do with my Multi.My Spirit is the shiny version.
I Did not find a Pocket wrench in Germany and th Piranha seems a bit thick, isnt it?
For now i bought a cheap Chinese one piece tool.
It has a few Metric holes to hold nuts while (un)fastening them with the tool and fits the pouch nicely (although it´s a bit short so i will have to put a lanyard on)
Man, this forum had me buy more stuff than i thought....
But on the other hand, now i have a nice Gerber MT 600 and a Spirit with fitting pouch so i can rotate my EDC tools a bit...
Put a lanyard in the nut holes and move it over when you need the right size.
You should be able to find the pirahna soon for order on the LM website.
It's not too wide, it's almost perfect. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login