Does such a thing exist?
-
Lets be fair, we have only had one bit of poor feedback on the tool, doesn't mean that everyone is going to dislike it.
-
I will also add that the one bad review we have seen was rectified when Gerber replaced the defective tool.
-
@Gareth said:
Lets be fair, we have only had one bit of poor feedback on the tool, doesn't mean that everyone is going to dislike it.I do a fair bit of cable making and im a tool nut so I looked into it a bit (before I knew it was 300 bucks) and other reviews had the same findings. Basically cool idea, cost 200 dollars more than dedicated tools, and doenst work. This guy found the same issue of the RJ45 crimper failure.
http://www.itstactical.com/digicom/comms/field-testing-the-gerber-cable-dawg/
"Perhaps the bigger point is that three tools that just work cost nearly $225 less than the single tool that kind of works."
-
I own the gerber cable dawg. It appears to be built really well but since I don't use it I can't say. What we need is for Bob to make some of those side cutter heads :)

-
Lets be fair, we have only had one bit of poor feedback on the tool, doesn't mean that everyone is going to dislike it.
I do a fair bit of cable making and im a tool nut so I looked into it a bit (before I knew it was 300 bucks) and other reviews had the same findings. Basically cool idea, cost 200 dollars more than dedicated tools, and doenst work. This guy found the same issue of the RJ45 crimper failure.
http://www.itstactical.com/digicom/comms/field-testing-the-gerber-cable-dawg/
"Perhaps the bigger point is that three tools that just work cost nearly $225 less than the single tool that kind of works."
Well I will fully admit his findings are mixed, but I do still think "disaster" is a little harsh. What we can fully agree on though is that $300 is a heck of a lot of anyone's money. :D
-
Lets be fair, we have only had one bit of poor feedback on the tool, doesn't mean that everyone is going to dislike it.
I do a fair bit of cable making and im a tool nut so I looked into it a bit (before I knew it was 300 bucks) and other reviews had the same findings. Basically cool idea, cost 200 dollars more than dedicated tools, and doenst work. This guy found the same issue of the RJ45 crimper failure.
http://www.itstactical.com/digicom/comms/field-testing-the-gerber-cable-dawg/
"Perhaps the bigger point is that three tools that just work cost nearly $225 less than the single tool that kind of works."
Well I will fully admit his findings are mixed, but I do still think "disaster" is a little harsh. What we can fully agree on though is that $300 is a heck of a lot of anyone's money. :D
Yes, I'll concede that the price is what made me not look at the tool seriously (and negatively compared to similar non multi tools), and I have never tried one. So I cant give an opinion as a user, just as a consumer in a browsing around mode.
-
Lets be fair, we have only had one bit of poor feedback on the tool, doesn't mean that everyone is going to dislike it.
I do a fair bit of cable making and im a tool nut so I looked into it a bit (before I knew it was 300 bucks) and other reviews had the same findings. Basically cool idea, cost 200 dollars more than dedicated tools, and doenst work. This guy found the same issue of the RJ45 crimper failure.
http://www.itstactical.com/digicom/comms/field-testing-the-gerber-cable-dawg/
"Perhaps the bigger point is that three tools that just work cost nearly $225 less than the single tool that kind of works."
Well I will fully admit his findings are mixed, but I do still think "disaster" is a little harsh. What we can fully agree on though is that $300 is a heck of a lot of anyone's money. :D
Yes, I'll concede that the price is what made me not look at the tool seriously (and negatively compared to similar non multi tools), and I have never tried one. So I cant give an opinion as a user, just as a consumer in a browsing around mode.
Exactly, it's the price that is the disaster. :) For, say, $30 it would make for a very nice conversation starter and an equally interesting paper weight... :P
-
Charge Ti is in:

I would say I marginally prefer the more solid feel of the Wave (the secondhand surge might just need tightening up a bit), but the 154CM blade is really nice. Put one of those on a Wave and it would be really sweet!
Now I just need to work out how to not loose it.
Paint it orange, right my name and address on it and put it on a very long lanyard perhaps!Sent from my GT-I9100 using Tapatalk 2
-
@Jammybstard said:
Charge Ti is in:

I would say I marginally prefer the more solid feel of the Wave (the secondhand surge might just need tightening up a bit), but the 154CM blade is really nice. Put one of those on a Wave and it would be really sweet!
Now I just need to work out how to not loose it.
Paint it orange, right my name and address on it and put it on a very long lanyard perhaps!Sent from my GT-I9100 using Tapatalk 2
How about one of those wallet leashes that motorcyclists use? You could clip one end to a belt loop, and the other end to the lanyard ring on the Charge. No matter where you carry it, if it falls out, you'll notice it right away, and it'll never get away from you.
-
I should have known!
in my cycling bag. I remember putting it there now!

I'm not a collector, I'll have to get rid of one of the Waves!
Sent from my GT-I9100 using Tapatalk 2
-
Way late to the party, but I saw this and thought of this thread:
Probably nasty as well as cheap, but at that price, maybe worth a try...
-
It's an interesting idea isn't it. Looks like there's no way of folding it up completely though, which is a shame.
Sent from my GT-I9100 using Tapatalk 2
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login