And so it begins.... (My adventures into Alox!)
-
Would this work, Electrician blade, large blade, scissors, cap lifter, phillips. I am working on a red scale with brass liner for an edc. Love having an awl but thinking a small blade would get used more.
-
@nj2656 said:
Would this work, Electrician blade, large blade, scissors, cap lifter, phillips. I am working on a red scale with brass liner for an edc. Love having an awl but thinking a small blade would get used more.Yep that tools combo would work. The electricians blade needs a tweak in the other direction, but it will fit. Same as the pruner blade needs that to nest in with the main blade.
-
But only those pruner blades that are mounted in the caplifter layer normally.
There are Pioneers that already have the blades nested next to the large blade (Settler, Pruner, Apprentice).


Or am I wrong?
-
Ah yes, those are even more rare to find for parts. Ive only had the ones that come from opener layer SAKs.
-
Do they vary in thickness?


Pretty confusing. ;)
-
-
So I guess they use a thinner spacer then. Just from the looks I'd say the awl is thinner than the can opener.
-
-
The electricians blade on the Pioneer Apprentice (53965) is bent to the side to make room for the knife blade, on the Electrician (53781) it's straight. There's also a slight variation at the tip. Also, the spacer is on the other side.
Pioneer Apprentice always on the left:




-
@enki_ck said:
The electricians blade on the Pioneer Apprentice (53965) is bent to the side to make room for the knife blade, on the Electrician (53781) it's straight. There's also a slight variation at the tip. Also, the spacer is on the other side.Pioneer Apprentice always on the left:
Thanks for the pics!
Looks like they are a different blade stamp, the nail nicks are different size. I figured they had to be bent though or there is no way to fit them. -
What do you use as springs for the Pliers nowadays? Still beefcaked saw springs?
-
-
What do you use as springs for the Pliers nowadays? Still beefcaked saw springs?
Ya, it means turning 2 farmers into pioneers for the springs, but they work so nice.
What happened to the custom springs?
I thought you had them made in different thicknessesDon't have them yet, BUT, they are in the mail on their way to me. The shop we were having grind them to the right thickness failed to do it, so Im going to make up something to hold it parallel to my bench belt sander, and surface them that way.
-
What do you use as springs for the Pliers nowadays? Still beefcaked saw springs?
Ya, it means turning 2 farmers into pioneers for the springs, but they work so nice.
What happened to the custom springs?
I thought you had them made in different thicknessesDon't have them yet, BUT, they are in the mail on their way to me. The shop we were having grind them to the right thickness failed to do it, so Im going to make up something to hold it parallel to my bench belt sander, and surface them that way.
Aaah. Well at least they're on their way! No more buying Farmers :D
-
How much do you have to take off? For pliers I mean.
-
@tattoosteve99 said:
How much do you have to take off? For pliers I mean.The 440c stock was 0.155 and I think pliers are 0.125. Im going to leave 5 thou on each side for a washer, so Im going to shoot for 0.135. Ive reduced blades and what not on the bench belt sander so It'll work. Its just a matter of making it even across the whole surface. And of course doing 200 of them manually is crazy. Only doing a few to get going manual, while a better shop is sought.
-
While you guys are talking decimal points I got a question. Is there enough space opposite the Phillips to put two tools, say the cap lifter and electricians blade? I know nothing of the way the springs work or what not. I was just staring at my yeoman wondering. Cause between here and the Yeoman thread I have three different knives built in my head that I want.
-
@nj2656 said:
While you guys are talking decimal points I got a question. Is there enough space opposite the Phillips to put two tools, say the cap lifter and electricians blade? I know nothing of the way the springs work or what not. I was just staring at my yeoman wondering. Cause between here and the Yeoman thread I have three different knives built in my head that I want.No way to choose between the three, just make 'em all :D I've never seen that configuration. Correct me if I'm wrong, but you would probably need two springs to do that, because opening one tool would make the other one loose.
-
I thought that might be the case. If I only had the time and money. My wife gets ticked when packages arrive from Canada so I have to choose wisely.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login