Cycling
-
@Nikos said:
Just spent the best part of the afternoon trying to calibrate the front derailleur on my bike (Python Quantum 8100). It turned out to be quite tedious and the chain is still rubbing with some gear combinations... :-\Ive used pliers on front gear changers for years but it is hard on a MTB, just remember you wont get it perfect going from say 9th and on the granny and visa versa, the chainline angle is the problem, i still prefer fixed gears but not fit enough these days :-\
-
@JDO330 said:
I notice a few of you are carrying a spare tube. Is it not easier to carry repair patches and levers?Anyone think this thread needs some bike pics, let's see what ya got.
I don't live in a climate that gets so cold that it snows (California coast), but I have had valve stems rip out from tube bodies in the past, and no patch kit can fix that kind of failure. If I'm in a hurry to get somewhere on time, and I get a flat, it's faster to just change the tube than it is to patch the one already in the tire. When I get home, I take the punctured tube out of my kit, patch it properly, and then put it back in my kit as my spare.
Def's comments about us not using the standard consumer level tools is spot on; I've never found a single multipurpose bike tool that meets my needs. The single biggest drawback they have is you can't usually use two tools in them at the same time. That makes most of them worthless for me. The 4" adjustable wrench I carry has a 10 mm jaw capacity, and on most bikes that's the biggest bolt size you'll find, unless you've got wheels with nutted axles.
-
I carry a pre-Gerber Cool Tool , but I for the wrong reason. I carry because I've always carried it and to be honest I've rarely used it mostly because I've been lucky. My on-the-road repairs have been limited to flats.
Now that I've gotten back into cycling after a 16 year break, its time to revisit my tool choices. The list provided by Heinz looks like a very good package and I'm not a fan of reinventing the wheel, so Heinz thank you for your input.
If I'm on a long ride or hauling my bike away from home for a ride I add a folding tire to my kit. More than once I've had tire shredding blow outs that couldn't be repaired be using a boot. Speaking of boots, I carry a dollar bill because it can be used as a boot if you get a particularly large hole in your tire.
-
While I'm not sure how effective they are for bikes I do have a few of them that split in half so you can use them as seperate tools, kind of like a SpydeRench.
Usually the allen wrenches are on one side and box wrenches are on the other.
Def
Sent from my MB860 using Tapatalk 2
-
A Topeak Ratchet Rocket is about all I need. Around $25 on that Amazonian store. The "Lite" version does away with the chain tool and used a fold-up nylon pouch that fits in a shirt pocket. I like the "Lite" version.
-
@JNieporte said:
A Topeak Ratchet Rocket is about all I need. Around $25 on that Amazonian store. The "Lite" version does away with the chain tool and used a fold-up nylon pouch that fits in a shirt pocket. I like the "Lite" version.I was looking at those myself.
I don't think I 'need' to carry ratcheting tools, but it would be nice to have. My kit as above, though, has handled just about everything that's ever gone wrong with my bike while away from home. -
@JDO330 said:
I notice a few of you are carrying a spare tube. Is it not easier to carry repair patches and levers?Anyone think this thread needs some bike pics, let's see what ya got.
Like the rest of the guys,I favour carrying 2 extra tubes.Firstly its just plain quicker to put a new tube in!Especially if you have quick release hubs.Secondly,when I lived nd mountain biked in South Africa,it wasnt uncommon to get multiple punctures similaniously,and Thirdly,the last puncture I had was so bad,it wrote off the tyre itself!
The other thing I'd strongly recommend is to fit Slime liners to your tires,and fill your tubes with Slime liquid.Its ability to seal punctures without resorting to patching is quite unbelievable!
-
This is the tool kit I've put together so far. I think it will have to do until Santa arrives.

-
@JDO330 said:
This is the tool kit I've put together so far. I think it will have to do until Santa arrives.looks ok mate but ive never carried a adjustable as these days there anr not many bolts on a modern bike unless its for nuts on the wheels but most have QR wheels,another usefull thing i carry and have got me out of trouble is zipties, i lost a jockey wheel bolt once and sliped a ziptie though till i got home, there handy things

-
I got a few of this from LIDL a while back.
They split into two parts (the tools on the left, one part, the ones on the right the other) so you have two tools (some lock) to use at the same time.
*Since I am an adult * I drive a car :P and cycling is, as expected, only for fun for me :D , so I can usually walk to the car or get someone to pick me up in case of any serious problems.
Thus, since I am always minimalistic and hate any extra (non bodily) weight I have my keychain micra or maybe a dime with me, for any loose screws etc. -
This is the tool kit I've put together so far. I think it will have to do until Santa arrives.
looks ok mate but ive never carried a adjustable as these days there anr not many bolts on a modern bike unless its for nuts on the wheels but most have QR wheels,another usefull thing i carry and have got me out of trouble is zipties, i lost a jockey wheel bolt once and sliped a ziptie though till i got home, there handy things

Agree re the adjustable, I've got it for my Sons bike which has nuts holding the wheels on. I guess a could patch a punctured tube with the wheel on the bike and lose wrench??
-
Zed, zip ties. Good call!
DKS, I might check that out.
Shall we have some bike pics? ????
-
@JDO330 said:
Zed, zip ties. Good call!DKS, I might check that out.
Shall we have some bike pics? ????
there is a few pics of our pics on here and i did one recently,

heres one of mine but there are few
/post/634961 -
I've been a cyclist for more than 25 yrs now and have carried numerous multi-tools in my tire bag. I currently carry the LM Charge XT with the bit kit, tire levers, a spare tube, zip ties and a patch kit in a Hammer Nutrition under the seat tire bag. I'm considering the <a href="http://www.biketiresdirect.com/product/crank-bros-multi-17-tool">Crank Bros Multi 17 Tool</a> but haven't decided yet.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login