And so it begins.... (My adventures into Alox!)
-
What do you use as springs for the Pliers nowadays? Still beefcaked saw springs?
Ya, it means turning 2 farmers into pioneers for the springs, but they work so nice.
What happened to the custom springs?
I thought you had them made in different thicknessesDon't have them yet, BUT, they are in the mail on their way to me. The shop we were having grind them to the right thickness failed to do it, so Im going to make up something to hold it parallel to my bench belt sander, and surface them that way.
-
What do you use as springs for the Pliers nowadays? Still beefcaked saw springs?
Ya, it means turning 2 farmers into pioneers for the springs, but they work so nice.
What happened to the custom springs?
I thought you had them made in different thicknessesDon't have them yet, BUT, they are in the mail on their way to me. The shop we were having grind them to the right thickness failed to do it, so Im going to make up something to hold it parallel to my bench belt sander, and surface them that way.
Aaah. Well at least they're on their way! No more buying Farmers :D
-
How much do you have to take off? For pliers I mean.
-
@tattoosteve99 said:
How much do you have to take off? For pliers I mean.The 440c stock was 0.155 and I think pliers are 0.125. Im going to leave 5 thou on each side for a washer, so Im going to shoot for 0.135. Ive reduced blades and what not on the bench belt sander so It'll work. Its just a matter of making it even across the whole surface. And of course doing 200 of them manually is crazy. Only doing a few to get going manual, while a better shop is sought.
-
While you guys are talking decimal points I got a question. Is there enough space opposite the Phillips to put two tools, say the cap lifter and electricians blade? I know nothing of the way the springs work or what not. I was just staring at my yeoman wondering. Cause between here and the Yeoman thread I have three different knives built in my head that I want.
-
@nj2656 said:
While you guys are talking decimal points I got a question. Is there enough space opposite the Phillips to put two tools, say the cap lifter and electricians blade? I know nothing of the way the springs work or what not. I was just staring at my yeoman wondering. Cause between here and the Yeoman thread I have three different knives built in my head that I want.No way to choose between the three, just make 'em all :D I've never seen that configuration. Correct me if I'm wrong, but you would probably need two springs to do that, because opening one tool would make the other one loose.
-
I thought that might be the case. If I only had the time and money. My wife gets ticked when packages arrive from Canada so I have to choose wisely.
-
-
@syph. I don't know what you use to hold the springs in place when you grind but I have done some manually that have work great by this method. I have a piece of sand paper glued to my bench. Another small piece of wood with some super strong double sided tape (strong I mean, takes prying to remove) Then I just place the part on the sticky,hold it and sand away. How do you do yours?
-
Syph, I´m getting off topic here, but if you´ve got that many Pioneers left, maybe you wanna do a straight trade for a lightly used Electrician? ;-)
Got one as my first alox and love the beefy blade and absence of the corkscrew, but don´t get warm with the Electricians blade. (which is untouched).
Just a thought.
-
I thought that might be the case. If I only had the time and money. My wife gets ticked when packages arrive from Canada so I have to choose wisely.
LOL. But ya a split spring would be the best, and actually probably would work. Interesting idea.
I'm thinking maybe grind a pair of the opener layer springs down thinner and use them side by side like the saw springs for the pliers. They'll operate in unison for the Phillips and independently for the 2 tools on the other end.
Springs and scales are on the way to you now as well as 3 of the long Phillips that you use for the 84mm. A few more sets of Alox scales will follow shortly. I now need a set of blue HA scales for Waterlander if you have them. I could really go for any HA scales you can spare in any color. I'm cutting some titanium 84mm scales so if you want to give them a try I can send you a pair with the Alox.
-
@lowtech said:
Syph, I´m getting off topic here, but if you´ve got that many Pioneers left, maybe you wanna do a straight trade for a lightly used Electrician? ;-)Got one as my first alox and love the beefy blade and absence of the corkscrew, but don´t get warm with the Electricians blade. (which is untouched).
Just a thought.
I've used the electrians blade a few times and I get the same comment from people. They dont like the rounded cutout and the blade is not straight, or sharp enough at the end. So I figured I might as well just start cutting down used blades from my pile and using those. Works fine, but cutting a nail nick will be harder than I thought.

I do have quite a pile of 93mm parts and scissors though. :D

More random stuff... I make these fit up blocks for each SAK size I work on. I find it saves so much time when working on a layer, to get it to a test fit stage, rather than fumbling with individual pins just for a test.

My sanding and grinding station. That 1x30 belt sander has been my most used tool lately to grind on inside corners like when I cut down 91mm scissors for 84s. The belts are also 50 cents on ebay! :D (12 for 6 bucks http://www.ebay.ca/itm/Norton-1-x30-120Grit-Alum-Oxide-Belts-PK-12-/370645576185?pt=Sanders_Sandblasters&hash=item564c32a9f9)

I ran out of bench room so I expanded with a fancy $10 piece of 3/4 plywood and 2 folding metal saw horses I got for $10 each.

-
@bushidomosquito said:
I'm thinking maybe grind a pair of the opener layer springs down thinner and use them side by side like the saw springs for the pliers. They'll operate in unison for the Phillips and independently for the 2 tools on the other end.Springs and scales are on the way to you now as well as 3 of the long Phillips that you use for the 84mm. A few more sets of Alox scales will follow shortly. I now need a set of blue HA scales for Waterlander if you have them. I could really go for any HA scales you can spare in any color. I'm cutting some titanium 84mm scales so if you want to give them a try I can send you a pair with the Alox.
Ya it would be a good use for 2 opener springs too, since I have those in abundance.
I will be anxiously watching the mail box for the package of goodies believe me! Blue HA will be the next run for sure, I'm all out.
I love anything Ti now... and in the 84 size it would certainly add some strength to the smaller frame.
-
Ah nice, but you didn't show the box of magic! :D
-
What thickness do you guys use for the TI scales? I'll keep my eye open at work to see if I can get any bits left from jobs.
-
@derekmac said:
What thickness do you guys use for the TI scales? I'll keep my eye open at work to see if I can get any bits left from jobs.If it's flat sheets we can use anything from .025" up to .125". I buy scrap wherever I can find it so if you can find decent sized pieces I'd be happy to buy or trade you for it.
-
What thickness do you guys use for the TI scales? I'll keep my eye open at work to see if I can get any bits left from jobs.
If it's flat sheets we can use anything from .025" up to .125". I buy scrap wherever I can find it so if you can find decent sized pieces I'd be happy to buy or trade you for it.
Ya weren't you making use of odd little parts for jewelry too? Like the cut parts between scales? Might as well get the max value out of a piece of Ti.
-
I'm thinking maybe grind a pair of the opener layer springs down thinner and use them side by side like the saw springs for the pliers. They'll operate in unison for the Phillips and independently for the 2 tools on the other end.
Springs and scales are on the way to you now as well as 3 of the long Phillips that you use for the 84mm. A few more sets of Alox scales will follow shortly. I now need a set of blue HA scales for Waterlander if you have them. I could really go for any HA scales you can spare in any color. I'm cutting some titanium 84mm scales so if you want to give them a try I can send you a pair with the Alox.
Ya it would be a good use for 2 opener springs too, since I have those in abundance.
I will be anxiously watching the mail box for the package of goodies believe me! Blue HA will be the next run for sure, I'm all out.
I love anything Ti now... and in the 84 size it would certainly add some strength to the smaller frame.
Cool. I'll cut you a few blanks out of 1/16" ti while I'm at it this weekend and send you a few pairs with all the Alox scales I'll have for you. I guess you can profile up to the scribe line yourself since you have the same sander I use.
-
What thickness do you guys use for the TI scales? I'll keep my eye open at work to see if I can get any bits left from jobs.
If it's flat sheets we can use anything from .025" up to .125". I buy scrap wherever I can find it so if you can find decent sized pieces I'd be happy to buy or trade you for it.
Ya weren't you making use of odd little parts for jewelry too? Like the cut parts between scales? Might as well get the max value out of a piece of Ti.
Oh I'm up to my neck in tiny jewelry sized pieces but I'll always be able to make use of anything bigger than a Dorito. I'm shooting a titanium cutting video this weekend to show how it's done with the jewelers saw so after you sand the profile on the 84s maybe you'll want to try cutting them out? Then you can make anything.
I'd like to do a video series on the whole process start to finish for those that want to try and those that want to buy.
-
What thickness do you guys use for the TI scales? I'll keep my eye open at work to see if I can get any bits left from jobs.
If it's flat sheets we can use anything from .025" up to .125". I buy scrap wherever I can find it so if you can find decent sized pieces I'd be happy to buy or trade you for it.
Ya weren't you making use of odd little parts for jewelry too? Like the cut parts between scales? Might as well get the max value out of a piece of Ti.
Oh I'm up to my neck in tiny jewelry sized pieces but I'll always be able to make use of anything bigger than a Dorito. I'm shooting a titanium cutting video this weekend to show how it's done with the jewelers saw so after you sand the profile on the 84s maybe you'll want to try cutting them out? Then you can make anything.
I'd like to do a video series on the whole process start to finish for those that want to try and those that want to buy.
Oh that would be awesome! My issue when I tried was that the area I was cutting would get so hot it would start to smoke.. even going slow. So clearly I needed a better coolant along the cut line or something. I was breaking a blade every quarter inch.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login