OK, your famous, now what?
-
Either I'd use the opportunity to get a Vic Ranger without the scissors+hook layer or I'd use the opportunity to help some friend or contact making tools or knives get ahead.
Or both.
And considering prostitution... A whore rents out his or her body, I'm a programmer, and rent out my mind, which is morally really the worse?
(And, btw, this is a joke showing my bad taste. The lack of safety for prostitutes is really no laughing matter.)
-
And your fingers too....
:ahhhDef
-
I would have to resurrect the Leatherman Charge Ti. I would go for the Wave, as my current BO edition is my standing favorite for a while now, but the one thing I would change about it is the comfort of the handles on the outside. The charge, especially the titatium ones, tackles that issue right out. I can safely say that out of all the tools I have sold or traded, my TTi was the one I should've kept for that reason. I hated the cap crimper which is why I chose the original Ti for my signature tool.
-
Easy I would get myself a $250 MTO original ToolClip :P :D
-
Great choice Mat! :D
Def
-
I would go to LM, and have the mt based mainly off the ST300.
The only thing I can think of would be to "maybe" add some scissors to it.... naaaaa, on second thought, I've grown so accustomed to the ST300, so I wouldn't change it... i'm just too used to the tool layout

-
I will ask Victorinox to make a SwissChamp in 108 mm with light blue nylon scales! :)
Half of the profits of this model (for all the years that will produce this model), they will given to people- countries that survive from a disaster.
That's why the emblem in the front scale will be a handshake.(My imagination gone wild again...)
-
@MARIOS7319 said:
I will ask Victorinox to make a SwissChamp in 108 mm with light blue nylon scales! :)
Half of the profits of this model (for all the years that will produce this model), they will given to people- countries that survive from a disaster.
That's why the emblem in the front scale will be a handshake.(My imagination gone wild again...)

-
Simple. Id want my own Gerber Suspension line...... Ya right.
-
I'm thinking a Sheath that would hold an SI and a pair of Craftsman Pliers and of course a Mini Maglight I would call it "Dtrain's Trucker's Friends!"
Dtrain
-
@hawkchucker said:
Simple. Id want my own Gerber Suspension line...... Ya right.I'd buy a Hawkchucker Edition Suspension!
Def
Sent from my MB860 using Tapatalk 2
-
@hawkchucker said:
Simple. Id want my own Gerber Suspension line...... Ya right.Haha, I enjoyed that. What color scheme?
-
I'd buy the Hawkchucker Suspension and use an engraving tool to replace his name with mine. I mean...
For a SAK, I'd do this...
For 4-3/8", the Victorinox Outrider is pretty much ideal for outdoor uses. Remove the can opener and bottle opener, and insert the combo tool. Make it locking; the linerlock should be fine. With the space saved by using the combo tool, you can insert the gutting blade. Machine the nail file into the back of the in-line Phillips driver. Even better, machine two different "grits" of nail file into the finger sides of the scissors; this will also give better grip on the scissors. The corkscrew should come with the mini screwdriver, and the handles should be Plus handles. Scale colors should be lime green or bright yellow. Make the tweezers fine-tipped. Nylon sheath with Velcro (Velcro will make a sound when opened, letting you know if it comes open accidentally) closure.For standard 3-1/2" the Victorinox Huntsman is my base. Lose the small blade. Remove the can opener and bottle opener; replace them with the combo tool. The combo tool should lock like the Wenger bottle opener. Machine the nail file into the scissors as above, or into the hook. You now have a three-layer SAK. Make the tweezers fine-tipped. Add Plus nylon scales in lime green or bright yellow.
For a plier-based tool, the Leatherman SuperTool 300 jaws on the Surge's handles are my base. One-handed linerlock plain-edge clip point blade, 154CM steel. One-handed linerlock wood saw, like on the Sidekick. The other two outside-accessible linerlocking tools would be the diamond file / metal saw / machined file and the scissors as presented on the Wingman, but better done. The inside tools: keep the large and small removable bit drivers. The can opener should be Victorinox-style, but keep the sharp V-notch. The reamer from the Core is ideal. A long-reach 3-D #2 Phillips screwdriver is added. A 3/16" flathead screwdriver will round out the drivers, as everything else can be accomplished with the removable bit drivers. The SwissTool's chisel / wire stripper is added. All inside tools should lock with individual springs like a SwissTool. Everything should be polished steel like the SwissTool. Phosphor bronze washer between each tool. Simple Phillips-head screws make customizing easy. Sheath should be nylon. Customer's pick between a Velcro closure or an open-bottom (so the tool can be sheathed while open) button closure.
Of course, these "my brand" tools would be for outdoor use. A mechanic or homeowner would likely want something else.
-
"whoever pays the most"
-Bear Grylls
-
-
Swisstool with needle nose pliers and tools that are easy to deploy if you have really short nails, hands are really cold or wearing gloves.
Sent from my Galaxy S3
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login