And so it begins.... (My adventures into Alox!)
-
Looking good, absolutely a thing of beauty! JR
-
Beautiful work as always. Can't wait to get a new knife to you.
-
Wooooo hoooooooooo, there she is :D
Been so worth the wait and awesome dealing with you on this. Can't wait to get my hands on it, and it's probably going to be my primary EDC for a great deal of the time. That backspring rocks

-
Looking great Syph, love the snap you are clearly getting.
Can the same spring be adapted for use on the 84mm frame? -
@Gareth said:
Looking great Syph, love the snap you are clearly getting.
Can the same spring be adapted for use on the 84mm frame?Sadly no. The 84 has more in common with the 91 as they share the center hole position (different size but some location). That's how I was able to use 91 springs on 84s to get scissors on. The 93s are completely their own beast as far as hole spacing for springs go. This spring I made up should work for a number of components though. I can even completely grind down the one end and use it for 2 tools.
If I run out of the old scissor backsprings from 91s that I got from Tom, I may have to make some springs up for the 84 scissor mods. I got a pile of them from him at the time, and I think i have 20 left, but he said he was running low on that old style last time I asked.
-
Tempting. I'm thinking about trying to scissor up a Cadet myself now that I found my old 84mm Climber.
-
@crackout said:
Tempting. I'm thinking about trying to scissor up a Cadet myself now that I found my old 84mm Climber.Hey if you already have 84mm scissors ready to go from a small climber, that mod should be straight forward. The nice thing about 84s is the parts between the alox size and cellidor are interchangeable, unlike the 91/93 sizes.
-
You mean like the pivot holes and liners? Yes, I like that, too.
However, I think I'd try to peen though. I'm not comfortable with drilling the 2.2mm holes to 3mm. Especially the center one. -
@crackout said:
You mean like the pivot holes and liners? Yes, I like that, too.
However, I think I'd try to peen though. I'm not comfortable with drilling the 2.2mm holes to 3mm. Especially the center one.Peening would be easier for sure. The funny thing is there is more metal on 84mm springs than 93mm springs. I drill 1/8 inch which is about 3.2 mm and there is far more metal left around the hole on 84s than 93s. It's just the way they were designed I guess.
-
My problem right now is the broken spring inside the scissors.
I have replacement springs, but the little curl on the one end is too big for the hole on the scissors. :ahhh
Victorinox must have changed the size of the holes on their current 84s compared to the old ones like the small Climber...Guess I'd have to drill the hole bigger because I see no way of slimming down the curl on the little fragile springs without breaking them.
-
I´ve got 2 spare springs which i suppose to come from older 91 vics with screwed together springs (as they came with a spare screw). shipping is cheap, so i can ship one of the m to you and you can test them. Or you measure teh curl on your springs and i check mine.
BTW: I did not find any older screwed together Scissors on any of my donor knifes.
-
Looking great Syph, love the snap you are clearly getting.
Can the same spring be adapted for use on the 84mm frame?Sadly no. The 84 has more in common with the 91 as they share the center hole position (different size but some location). That's how I was able to use 91 springs on 84s to get scissors on. The 93s are completely their own beast as far as hole spacing for springs go. This spring I made up should work for a number of components though. I can even completely grind down the one end and use it for 2 tools.
If I run out of the old scissor backsprings from 91s that I got from Tom, I may have to make some springs up for the 84 scissor mods. I got a pile of them from him at the time, and I think i have 20 left, but he said he was running low on that old style last time I asked.
Ah well. :-\ I rather thought that it was a long shot.

-
Here's a very different one from my typical jobs. It was a request by a user with the use of only one hand. He wanted a one hand opener but just the electrician blade and nothing else.
This uses my custom spring for a type of solo electrician. The blade was straightened out as normally they are bent to fit with the cap lifter. I also rounded out the hump on the pivot on one side to require less force to start the opening process since the blade is shorter and there is less leverage. I also peened this one. Crazy I know... :D The customer wanted it so I obliged.



My cat and I took some video to show the action. (He was just taunting the neighbours dogs which is why they were barking)
Cheers
-
May I see the other side? :D
Crazy mod! -
-
That's great. I like the idea of OHO blades on SAKs but thought they would ruin the over all look... not so!

-
It doesn't look like it but is the thumb stud drilled and tapped or does it just go over the top? Reason I'm asking is as I mentioned to you I would like that mod but in a multilayer.
-
-
I just finished delicate surgery to upgrade a red old cross pioneer. This is my first colored stock anodize mod. They are much trickier to work with than say silver stock anodize, or my hard anodized scales. I cant countersink the center hole from the outside as I don't have the benefit of being able to re-anodize. If I tried to countersink in these scales there would always be some rough edges showing around the screw and to me that's not acceptable.
So to do these type of mods I drill 1/8 from inside the scale in the center hole, careful to not go all the way through, then use smaller head screws from the outside. It works out perfect, it's just much more fiddly. Im reminded when I work with stock ones though how much I prefer my redone scales. I take the time to edge sand the inner edges of the scales that Vic does not and leaves sharp. That sharp edges is prone to chipping much more than mine does after gentle rounding.
You have to love the look of the old cross though, it's by far my favorite of the alox scales!






Cheers!
-
Delicious!


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login