crackout's Adventures in Alox.
-
I got sick of searching for a cheap new Explorer so I just ordered a new one. :-X
I also realized the thin spacer from Electricians is still about a 1/10mm too thick to shim up the caplifter to phillips width but I'll sand that sucker until it matches.
So upcoming: A Harvester bringing a pruning blade as a replacement for the awl and an Explorer bringing an inline phillips to replace the can opener (which will go into the Harvester).
Stuff should arrive on Tuesday hopefully.
If somebody wants the leftovers from Explorer teardowns (cap lifter, can opener, magnifying glass, blade, small blade) or even a reassembled Explorer (-> Climber), shoot me a pm.
-
And finished!



Big thanks to Syph for the support.

-
Looks good to me!

Did you have any trouble shaping the philips part to get it to work?
-
No, once you understand that the front nipple controls the angle of the driver when closed and the second the overall position it's fairly easy. I think I could have left an itsy bit more material on the top, but it works perfectly nevertheless.
The spring needed far more grinding to handle the caplifter. Btw, I used the thin spacer that came with the Harvester to shim the caplifter. Works like a charm.
Bending the Pruner blade was also a lot easier than bending the Electrician's blade. Actually, I already bent it too far with the first blow and had to go back a little.

6 scales will go to my anodizer (& laser engraver) tomorrow. :)
-
And here we go: Call it Super Bantam, Voyageur, Alox Compact... ::)

First peen-job. Went smoothly. My new EDC. :D
Two layer 84 alox just feels so nice. I begin to understand why so many people love Cadets.
-
Looks good to me! It is a slender but powerful combination of tools isnt it? How do the back side of your pins look? :D
-
Pretty much stock, except for one. Not sure why this one turned out so different (a little wider). Might redo that one.
I used a block of steel I drilled a little hole for the pin head of one side in. And a modified 'punch' with the same hole. Worked pretty nicely.
Tools: I'd love to have a caplifter layer and a nail file instead of the combo tool (a scissored Cadet), however then it's just too thick for my taste for a 84.
-
very nice!

-
Cool... great EDC

-
Found some time to shoot better pictures.



-
Lovely

You can't really get too much of a good thing.
-
Found another old 84mm Climber.
This time I ordered a Cadet. Let's see which one I'll like better: Voyageur or scissored-up Cadet.
-
Scissors on a Cadet does make a good SAK, though I'm actually a big fan of the Climber Small as it stands. :D

-
Looks like a broken spring.
I recently got 3 84mm replacement scissors from Victorinox. Old leftovers I think. Awesome! -
-
While waiting for the Cadet I fiddled this one together. Tore apart my old Midnight Manager, bought an Alox Classic and after some magic spells:

Notice how the shield is on the right side (like on the bigger models) instead of near to the keyring. This has always been bothering me with the small Alox (including the +B Alox Rambler).
-
Tried golden screws on a new Farmer with scissors mod. I like it. Combines both looks. :tool:

-
Cadet with scissors. Finally. I have to say this sucker is close to being perfect for me.

I used thin Cadet liners for this (had to get two :S). Super slim. :D
-
nice work mate! i rally like the rambler

-
For the cadet that lost its liner, you could use a liner from a donor recruit or somesuch (and maybe use the spring to make it into something else).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login