good edc fixed/folder?
-
Wow, thank you all so much! I think I realize why I Ann always looking for new knives though... I have a bear grylls small fixed blade, and a more suitable lmf II, though no sheath for it (help), a handle-less Gerber profile (my first fixed blade, used it all last year. I also have enough suitable stainless folders, though I have always wanted a carbon knife, it's just that I always get them new, and don't want to get then dirty, or lose their factory edge... For example, a couple weeks ago I got a spyderco police, and though I love it (prefer a tad more belly, that's why I have an endura on the way, thanks Dunc!) But I haven't used it since I realized it is the sharpest knife I've ever handled, and I don't want to use the draw through sharpener on it, and I don't want to get the pivot dirty... It kills me. I also have a vic centurion, but there's so many cracks for stuff to get in. my perfect folder at this point is a spyderco Jess horn, I absolutely love three frn handle, and the combo edge is lovely. and it's old enough I'm not afraid to use it, but the last 1/2" broke off, so I rounded it off... I'd love to get another, but they're not made. Sorry if that's droning, I can't read it for continuity easily on my phone.
As for opening cans with knives, if my Gerber profile can do it many times, I'd hope others could :D it's a lot faster than a vic opener, though I do use one from time to time.
-
Just because a knife will open a can doesn't mean you should ;)
The purpose of a knife is to be sharp, and cutting metal with it is a very good way for it not to be sharp
Besides, it's hardly the safest way of getting a can open. One complacent slip might convince you not to try that again, but it would be nice if you found an alternate way that works for you *before * you start leaking red stuff everywhere 
Your knife, your choice, your fingers :D just my opinion

-
A true fact

Though being 17, I've been known to actually say, "speed over safety" :D
True that it can be dulling, though I also used that Gerber for digging trenches around my tent in the rain...
But yeah, I do usually have a cadet on me, or a pst, as I prefer the old lm opener to any current variety.

-
:D
-
@SAKnight said:
it's just that I always get them new, and don't want to get then dirty, or lose their factory edge... For example, a couple weeks ago I got a spyderco police, and though I love it (prefer a tad more belly, that's why I have an endura on the way, thanks Dunc!) But I haven't used it since I realized it is the sharpest knife I've ever handled, and I don't want to use the draw through sharpener on it, and I don't want to get the pivot dirty...Sounds like you would benefit from learning how to sharpen your knives than a new one, and that skills would benefit you for years to come. Put that $40 towards some stone, sandpaper and a cheap knife or two. Cleaning isn't really a big deal at all, run it under warm tap water and brush with with soap and toothbrush will get almost anything out, worst come disassemble it and clean the parts.
-
it's just that I always get them new, and don't want to get then dirty, or lose their factory edge... For example, a couple weeks ago I got a spyderco police, and though I love it (prefer a tad more belly, that's why I have an endura on the way, thanks Dunc!) But I haven't used it since I realized it is the sharpest knife I've ever handled, and I don't want to use the draw through sharpener on it, and I don't want to get the pivot dirty...
Sounds like you would benefit from learning how to sharpen your knives than a new one, and that skills would benefit you for years to come. Put that $40 towards some stone, sandpaper and a cheap knife or two. Cleaning isn't really a big deal at all, run it under warm tap water and brush with with soap and toothbrush will get almost anything out, worst come disassemble it and clean the parts.
I have a smiths diamond steel (stone?) But I was never able to get a fantastic edge. Difficulty with consistent edge angle, I believe. The pull sharpener will give me an edge on vics that will cut newsprint, and for $3, it was hard to justify twenty times that much for a better edge. The main problem, is I learn a bit better when someone shows me, and nobody I know knows how. Perhaps I'll invest. What's the best sharpener, by which I mean easiest, for a beginner such as I?
-
Probably Lansky system or Spyderco sharpmaker, although there are limitations to both. Or a Lansky turnbox for really cheap, less than $20 if I recall.
-
One of the systems would be a good way to start learning, and once you've got a better understanding of how they work, then start experimenting with doing it by hand.
I'm fortunate in that when I was young I worked in restaurants for several years, and learned from one of the chefs that I worked for how to hand sharpen the traditional way, with a stone and mineral oil.
One advantage of the new artificial diamond stones is that you can use them dry with no ill effects. You can use water for flux if you want, but it's not necessary. My experience with them is that using anything for flux doesn't really make much of a difference to the stone; crud will build up on it no matter what you use. So, I just use them dry and frequently wipe the blade I'm working on. Every few weeks/months I just dunk it in some hot soapy dishwater and scrub throughly with a fine, stiff bristled brush. That takes a lot of the accumulated gunk off and makes them look pretty again.
-
IIRC , Kabar makes/used to make some Dozier designed D2 collabs . They were pretty inexpensive in relation to quality . You might need to pick them up of Amazon or the Bay .
Chris
-
@SAKnight said:
Wow, thank you all so much! I think I realize why I Ann always looking for new knives though... I have a bear grylls small fixed blade, and a more suitable lmf II, though no sheath for it (help), a handle-less Gerber profile (my first fixed blade, used it all last year. I also have enough suitable stainless folders, though I have always wanted a carbon knife, it's just that I always get them new, and don't want to get then dirty, or lose their factory edge... For example, a couple weeks ago I got a spyderco police, and though I love it (prefer a tad more belly, that's why I have an endura on the way, thanks Dunc!) But I haven't used it since I realized it is the sharpest knife I've ever handled, and I don't want to use the draw through sharpener on it, and I don't want to get the pivot dirty... It kills me. I also have a vic centurion, but there's so many cracks for stuff to get in. my perfect folder at this point is a spyderco Jess horn, I absolutely love three frn handle, and the combo edge is lovely. and it's old enough I'm not afraid to use it, but the last 1/2" broke off, so I rounded it off... I'd love to get another, but they're not made. Sorry if that's droning, I can't read it for continuity easily on my phone.As for opening cans with knives, if my Gerber profile can do it many times, I'd hope others could :D it's a lot faster than a vic opener, though I do use one from time to time.
You could try making one from some PVC pipe, there's a nice little video here

(reply no22)
/post/617599I'm with the others on carrying something else to open cans with :ahhh
I find the 'Lansky System' good for my sharpening as it takes all the skill out of the job which suits me well

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login