And so it begins.... (My adventures into Alox!)
-
Yes the crazy mod fest continues!
I'm still working through a back log of custom requests. I've only been posting ones that were different than standard ones to this thread though. I didn't see the point in posting a bunch of the same mods.
I said I wouldn't go above 4 layers, but I did anyway. :D I've been calling this a big boy farmer.






I put both saws in the same layer since it seemed silly to put a spacer between two such thin layers. It works fine so I'm happy. There is a 0.005 phosphor bronze washer between the tools though.

Cheers!
-
@Syph007 said:
Yes the crazy mod fest continues!I'm still working through a back log of custom requests. I've only been posting ones that were different than standard ones to this thread though. I didn't see the point in posting a bunch of the same mods.
I said I wouldn't go above 4 layers, but I did anyway. :D I've been calling this a big boy farmer.






I put both saws in the same layer since it seemed silly to put a spacer between two such thin layers. It works fine so I'm happy. There is a 0.005 phosphor bronze washer between the tools though.

Cheers!
Nice job! JR
-
That Sir, is a lovely tool!

Keep them pictures coming, especially some Bantam / Cadet's. really tempted by a cadet with scissors in black or green or maybe blue???

Regards, Jon.
-
@JDO330 said:
That Sir, is a lovely tool!
Keep them pictures coming, especially some Bantam / Cadet's. really tempted by a cadet with scissors in black or green or maybe blue???

Regards, Jon.
Ive only got red cadet scales left, but I bought 6 bantams that are going to blue anodize next week, when I do my blue HA3 run. :D
-
The Phillips driver opposite the two opener tools in one layer is quickly becoming the newest popular request. I really like it. Here it is again in green scales and c260 cartridge brass liners.





Cheers!
-
Wow, another stunner!
Is this mod possible with something else instead of the awl? Maybe a small blade? Anything else?
Regards, Jon.
-
Wow, another stunner!
Is this mod possible with something else instead of the awl? Maybe a small blade? Anything else?
Regards, Jon.
thats what I said, I think the small nail file would be perfect! JR
Great job, keep it up!!It's possible with anything that's available in single layered SAKs.
The electricians blade would be easiest to get from a Pioneer Apprentice. The small nail file isn't that easy as no 91 or 93 mm SAK has them and the one from 84mm SAKs sits too low. Maybe the one from a 85mm Wenger would work.
-
Oh for sure ya, any of the small blades would fit in the awl spot, electrician, pruner or small spear point. I 'think' i could put a cadet nail file on if I used my custom spring so I could make the spring end thicker. It sits too low if I use a regular blade spring. Well it works, but the nail nick is partially hidden, same thing if I try an 84mm combo tool there.
-
@Syph007 said:
Oh for sure ya, any of the small blades would fit in the awl spot, electrician, pruner or small spear point. I 'think' i could put a cadet nail file on if I used my custom spring so I could make the spring end thicker. It sits too low if I use a regular blade spring. Well it works, but the nail nick is partially hidden, same thing if I try an 84mm combo tool there.So if you used one of your custom springs would it rise the nail nick higher then the scale? If so that would be a perfect combo! JR
-
Oh for sure ya, any of the small blades would fit in the awl spot, electrician, pruner or small spear point. I 'think' i could put a cadet nail file on if I used my custom spring so I could make the spring end thicker. It sits too low if I use a regular blade spring. Well it works, but the nail nick is partially hidden, same thing if I try an 84mm combo tool there.
So if you used one of your custom springs would it rise the nail nick higher then the scale? If so that would be a perfect combo! JR
Yep I think so at least. I was going to try it to be able to use combo tools from 84s, so it would work for the nail file too, I just have to try it.
-
Oh for sure ya, any of the small blades would fit in the awl spot, electrician, pruner or small spear point. I 'think' i could put a cadet nail file on if I used my custom spring so I could make the spring end thicker. It sits too low if I use a regular blade spring. Well it works, but the nail nick is partially hidden, same thing if I try an 84mm combo tool there.
So if you used one of your custom springs would it rise the nail nick higher then the scale? If so that would be a perfect combo! JR
Yep I think so at least. I was going to try it to be able to use combo tools from 84s, so it would work for the nail file too, I just have to try it.
Kool can't wait to see, fingers crossed! JR
-
another lovely job.
-
I always wondered, why torx screws? I know a lot of knifemakers use it but wouldn't a phillips or flat head screwdriver be more easily serviceable? I mean you could tighten a SAK with a SAK :ahhh
-
@enki_ck said:
I always wondered, why torx screws? I know a lot of knifemakers use it but wouldn't a phillips or flat head screwdriver be more easily serviceable? I mean you could tighten a SAK with a SAK :ahhhI think both looks, and that you can get more torque on a torx. For a pattern of the same radius, you hve 6 points of contact vs 4. I like the look of the torx over philips too. Other than that the most plain answer is that, that is what all the knife supply stores sell... so thats what i use. :D
-
I always wondered, why torx screws? I know a lot of knifemakers use it but wouldn't a phillips or flat head screwdriver be more easily serviceable? I mean you could tighten a SAK with a SAK :ahhh
I think both looks, and that you can get more torque on a torx. For a pattern of the same radius, you hve 6 points of contact vs 4. I like the look of the torx over philips too. Other than that the most plain answer is that, **that is what all the knife supply stores sell... so thats what i use. ** :D
I thought it was something like that. :D
-
Today's project was a simple two layer. Pruner/blade with scissors. It's a nice little knife. :D




-
I always wondered, why torx screws? I know a lot of knifemakers use it but wouldn't a phillips or flat head screwdriver be more easily serviceable? I mean you could tighten a SAK with a SAK :ahhh
I think both looks, and that you can get more torque on a torx. For a pattern of the same radius, you hve 6 points of contact vs 4. I like the look of the torx over philips too. Other than that the most plain answer is that, **that is what all the knife supply stores sell... so thats what i use. ** :D
I thought it was something like that. :D
Be even better if they were titanium! JR
-
May Syph lead me not in to temptation....
Yeah, right ::)
-
The idea of putting the Philips opposite of the openers is truly genius.

Question, though, it looks as though there has to be a layer between them and the blade layer to access the bottle opener nail nick. Is this correct? If so, does it have to be scissors, or would a wood saw still allow access to the bottle opener nick.
I'm also curious, does not having the bottle opener up against the liner make it weaker? As in, it would take less prying force to make something break?
I've got the mod lust a-brewin'

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login