SwissChamp mod
-
Almost there! :D
Although I think my corkscrew might be a little bent :(
**
UPDATE: I just noticed that the center pin (with bushing) is a little loose. The tools still snap in but I want to know if there's a problem or something i could do about it.**


-
if you refer to the mid pin,not the corkscrew one but the one that you can see with the tools open, that pin does not have to be so tight, i have seen several new knives with that pin a little bit loose, so there is no problem at all.

-
@Sidhartha said:
if you refer to the mid pin,not the corkscrew one but the one that you can see with the tools open, that pin does not have to be so tight, i have seen several new knives with that pin a little bit loose, so there is no problem at all.
I mean this one

-
Welcome,
Its nice to see the pictures of your work as you do it
-
if you refer to the mid pin,not the corkscrew one but the one that you can see with the tools open, that pin does not have to be so tight, i have seen several new knives with that pin a little bit loose, so there is no problem at all.

I mean this one
That's the one Sidhartha was talking about. It can be a bit loose.
But you didn't set your knives right. The spacer, the small part that is on the same side as the small blade should be on the other side, so the big blade can rest on it.
-
if you refer to the mid pin,not the corkscrew one but the one that you can see with the tools open, that pin does not have to be so tight, i have seen several new knives with that pin a little bit loose, so there is no problem at all.

I mean this one
That's the one Sidhartha was talking about. It can be a bit loose.
But you didn't set your knives right. The spacer, the small part that is on the same side as the small blade should be on the other side, so the big blade can rest on it.
Oh man... that really sucks :(
I knew something was wacky... Now I have to take it apart again
I thought I put them back right this time :(
Thanks for pointing out AGAIN -
I lost 2 bushings... They fell of my bench

-
Reboot!
I know it's been months since my last post...
I haven't finished the mod yet due to boredom and other stuff that had to be done.
Last night I thought I should finish it.
Anyway, as I browsed other mods, I had a desire to install a combo tool on my mod. It should save a bit more space... So, this morning i visited my local flea market once more and I got myself these two knifes for 6 euro each (don't know the models), but when I came back home I saw that my swisschamp tools are larger than these.- Would they fit properly?
- Can I use just the combo with the same spring?
Also I'd like to know where can I get new shiny scales. The links some members sent me are empty.
Thanks
EDIT: blade compare


-
bump?
I don't want to take my new knife apart if it won't fit :( -
Sorry, I missed your update post. No, the combo tool from the 84mm Waiter and Bantam is too small. You'd need one from a 91mm Compact. I'm glad you're back on it though. Keep us updated.

-
I think i have a Compact with a bent corkscrew that i could let go cheap and i have an assortment of new or slightly used scales - Shipping from Germany to greece will not be very expensive, too.
So, if you are interested, drop me a PM and we can work something out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login