What Did You Use Your Multitool For Today?
-
pulled part of the doorpanel off the car
-
I thought this was pretty funny. Today two kids ran towards me saying "Sir, sir! Can you help us? We put a bumper sticker on this ground spot light and now it is smoking like crazy" at first I was laughing and then I thought that I didn't have anything to remove it other than a knife, but I don't like pulling a knife in public especially not in front of kids. But then I figured; I got my dcf knife with prying tool exactly for this. Needless to say it made short work of the bumper sticker.

-
I was setting up a large, articulated tripod on a photo shoot today. It was quite old and hadn't been used in a while so most of the adjustment bolts were very tight but one just couldn't be turned by hand. Luckily I had the Crunch with me and it just barely opened wide enough to clamp on. It definitely saved the day and was another example of a task that neither my Spirit nor Charge would have been able to tackle.
-
@Boyen said:
I thought this was pretty funny. Today two kids ran towards me saying "Sir, sir! Can you help us? We put a bumper sticker on this ground spot light and now it is smoking like crazy" at first I was laughing and then I thought that I didn't have anything to remove it other than a knife, but I don't like pulling a knife in public especially not in front of kids. But then I figured; I got my dcf knife with prying tool exactly for this. Needless to say it made short work of the bumper sticker.
How do you like that DCF? I am thinking about getting one but I don't know how to go about it. Do you use the contact info at the bottom of the page or do they have a store online?

-
Use the contact button on the bottom of the page. His tools have an excellent quality, handcrafted entirely to your preference meaning; if you want a certain tool on it, or an inch longer or shorter it is entirely possible. I also liked that my tool received two weeks of heat treatment. You don't get that everywhere. That said, his products aren't cheap and you need to wait a while for it. Overall, I am very happy with his product.
-
Used my Wenger cigar cutter yesterday on some cigars. Worked very well, despite the high alcohol consumption of the operator.
-
Been wondering about that cigar cutter. I've been eyeing it for a while but I wasn't sure how well it would work.

-
@stealth007s said:
Been wondering about that cigar cutter. I've been eyeing it for a while but I wasn't sure how well it would work.I have a Xikar cutter and several of the usual guillotine ones so I never saw the need to use the Wenger. The scissors always felt that they had a bit of play in them so I was worried that the cut will be bad. I may have used them once before, ages ago.
Well, I was surprised yesterday. Sliced both cigars, a corona and a large torpedo very easily and cleanly; no shredding. I also have the Victorinox one, but I have never used it as I like a cut rather than punch for my cigars and I also like the torpedoes that cannot be punched. The victorinox is, however, slimmer. A sharp thin slipjoint blade also works well in an emergency. -
I decided to clean up a bit and threw away about 9 old bags and purses....however, they still had some nice and useful thingies I didn't want to throw away... so I had an hour fun with using my PS4 knife and pliers, cutting & pulling out different straps, small carabiners, buckles, rings and other stuff I could use as keychains or adding to MTs or sth.... It was such a cool tool day... and the tiny blade of the PS4 is just outstanding :D
-
These (and a lot of tape and boxes) were used to pack from my old house

And these were used to build everything back together to my new house

Not today, not even on a single day, but I consider it one project

-
Been wondering about that cigar cutter. I've been eyeing it for a while but I wasn't sure how well it would work.
I have a Xikar cutter and several of the usual guillotine ones so I never saw the need to use the Wenger. The scissors always felt that they had a bit of play in them so I was worried that the cut will be bad. I may have used them once before, ages ago.
Well, I was surprised yesterday. Sliced both cigars, a corona and a large torpedo very easily and cleanly; no shredding. I also have the Victorinox one, but I have never used it as I like a cut rather than punch for my cigars and I also like the torpedoes that cannot be punched. The victorinox is, however, slimmer. A sharp thin slipjoint blade also works well in an emergency.I'm not sure what a slipjoint blade is. I'll shmoogle it to find out I guess.

-
I'm sure that's one of the sanremu knives and usually has a bird etched on the handle. Sanrenmu 401 ?
-
Been wondering about that cigar cutter. I've been eyeing it for a while but I wasn't sure how well it would work.
I have a Xikar cutter and several of the usual guillotine ones so I never saw the need to use the Wenger. The scissors always felt that they had a bit of play in them so I was worried that the cut will be bad. I may have used them once before, ages ago.
Well, I was surprised yesterday. Sliced both cigars, a corona and a large torpedo very easily and cleanly; no shredding. I also have the Victorinox one, but I have never used it as I like a cut rather than punch for my cigars and I also like the torpedoes that cannot be punched. The victorinox is, however, slimmer. A sharp thin slipjoint blade also works well in an emergency.I'm not sure what a slipjoint blade is. I'll shmoogle it to find out I guess.

In general it is folding knives that use a spring to keep the blade open or shut, **without locking ** it, like most SAKs blades and many traditional style knives like the Case sodbuster, barlows, toothpick knives etc. Usually, since they are not designed for stabbing or chopping down trees they have thinner blades, compared to locking knives.
-
And these were used to build everything back together to my new house

Not today, not even on a single day, but I consider it one project

What's the pocket knife? :)
The small one is a Sanrenmu 401, the bigger on the first photo is a Sanrenmu 763.
-
Been wondering about that cigar cutter. I've been eyeing it for a while but I wasn't sure how well it would work.
I have a Xikar cutter and several of the usual guillotine ones so I never saw the need to use the Wenger. The scissors always felt that they had a bit of play in them so I was worried that the cut will be bad. I may have used them once before, ages ago.
Well, I was surprised yesterday. Sliced both cigars, a corona and a large torpedo very easily and cleanly; no shredding. I also have the Victorinox one, but I have never used it as I like a cut rather than punch for my cigars and I also like the torpedoes that cannot be punched. The victorinox is, however, slimmer. A sharp thin slipjoint blade also works well in an emergency.I'm not sure what a slipjoint blade is. I'll shmoogle it to find out I guess.

In general it is folding knives that use a spring to keep the blade open or shut, **without locking ** it, like most SAKs blades and many traditional style knives like the Case sodbuster, barlows, toothpick knives etc. Usually, since they are not designed for stabbing or chopping down trees they have thinner blades, compared to locking knives.
Thanks for the info dks


-
I used the flat bladed screw driver on my Crunch to prise open a smoke alarm cover to replace the battery, job done

-
Gave my S4 and Atwood to my son so he can finish his Lego Technic


-
Used my Victorinox Manager's flat screwdriver to fix the handle on some equipment.
First time ever; that screwdriver is tougher than it looks!!! -
Used my Wingman and MUT to try to remove a coax cable tip. The tip was locked up on the cable so I had to get a new cable and tip. Wingman fail #1986123!¡! Only thing on the Wingman that's impressed me so far is the package opener. I know that I've said that I was dropping the Wingman from EDC and this was the last straw for it. It now officially belongs to the Mrs.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login