Show off your Sak mod's!
-
nice!
where did you get them?
-
My latest mod:


I really like this one a lot. It's my new EDC. I'm going to take it back apart to do some fine tuning (more snap) and then slap on a pair of black scales, since I got krazy glue on the translucent ones
.I also found a precision 40 piece Wiha bit set that works with the bit driver. I got a small neodymium magnet & krazy glued it in there to hold them in place. So far it's working surprisingly well :D I'm thinking about putting magnets in all the bit holders as well.
Edited to add:
+1 on the screws
crackout, that looks sweet. What does the other side look like or are they Chicago screws?
-
good idea on magnets
funny i was at home depot and saw a small precision set of drivers and wondered if they would fit...
i said it in your thread but again fantastic work.
this mod should make the scissors guys go bonkers,
any ideas for a name?
-
It's still using threaded pivots like Syph's models. I only went for these this time:
-
yeah i like the gold.
i might have to order some of those and see how i like them
-
Every time I resupply on screws I almost get the 24k gold plated ones.. then I think.. no I dont need them... but maybe I should give them a shot. They might look nice with black scales.
$30 for 100 of them.

-
Yay!


-
it's def still a cybertool, maybe THE cybertool...

what else did you do besides change scales? (im trying to go back and forth from the old pic to new one)
-
I found some screws at a local hardware store that just happened to have bolts and heads that the scales would pop onto. The diameter of the screws were slightly less than the stock pins so some of the snap was gone when closing an opening tools. My 2.2 mm brass pins finally arrived so I removed the screw I had in the corkscrew slot and put in the pin, which solved the problem. I actually think it has a little more snap now than it did stock :D
That's basically the only thing I did... improve the snap and change the handles. I also scored the T6/T8 bit from Austria, which is perfect for my Spyderco :D
-
couple questions for you bodie
-
can you provide more info (and pics if possible) of the screws you found? i'd love to try tracking some down tomorrow
-
where did you get 2.2mm pin stock? i thought that was the holy grail of sizes and we were stuck sanding 2.5 (or 3/32) down?
thank you!
oh and what spyderco model is that?
-
-
It's true. A perfect pin stock match is key for a good snap.
I get my 2.2 brass pins from a model company named Modelcraft. They sell 2.2mm.
-
I believe I may have a solution to size problem. I may make a special die to cut thicker brass rod down to size. The only thing holding me back is waiting for my friend at the machine shop. But once I get the drawings done, I'll share them here :)
-
@WiSAKfan said:
couple questions for you bodie-
can you provide more info (and pics if possible) of the screws you found? i'd love to try tracking some down tomorrow
-
where did you get 2.2mm pin stock? i thought that was the holy grail of sizes and we were stuck sanding 2.5 (or 3/32) down?
thank you!
oh and what spyderco model is that?
-
I ended up krazy gluing the handles on since I didn't think I'd be popping them back off. I found them at a store called Quality Hardware in Thomasville, NC. I'm not even sure what size they are. I just showed them the the scales of a SAK and asked them to help me find the closest thing that would fit. I originally only got them to temporarily put the knife back together to ensure that everything was working properly before putting the pins in. Then I realized that the scales would pop on and decided to just leave them. The side with the bolts was really tight. It took everything I had to mash them on with my fingers. When I put the black ones on I used a vice.
-
I got the 2.2 mm brass pins from rotokid: http://rotokid.sosakonline.com/index.php?option=com_frontpage&Itemid=1
I'm probably going to go back to Quality Hardware sometime and see if I can find them again since they worked so well. If I'm able to get more I'll post some pictures and report the size. Best thing was they were only like .22 cent a piece.
Edited to add:
Almost missed that last part. It's a limited run Carbon Fiber Spyderco ParaMilitary 2. My favorite EDC knife. I wish I could get a back up, but the last one I saw on ebay was buy it now for 450 :O when the original MSRP was around 169 I think. I think they run at about $100 or so for the G10 version.
-
-
thanks bodie!
yeah that spyderco looks sweet!
-
Excellent work on the black CT - great set up. Can see it being very useful indeed :)
-
I have one too.

-
couple questions for you bodie
-
can you provide more info (and pics if possible) of the screws you found? i'd love to try tracking some down tomorrow
-
where did you get 2.2mm pin stock? i thought that was the holy grail of sizes and we were stuck sanding 2.5 (or 3/32) down?
thank you!
hi
oh and what spyderco model is that?
-
I ended up krazy gluing the handles on since I didn't think I'd be popping them back off. I found them at a store called Quality Hardware in Thomasville, NC. I'm not even sure what size they are. I just showed them the the scales of a SAK and asked them to help me find the closest thing that would fit. I originally only got them to temporarily put the knife back together to ensure that everything was working properly before putting the pins in. Then I realized that the scales would pop on and decided to just leave them. The side with the bolts was really tight. It took everything I had to mash them on with my fingers. When I put the black ones on I used a vice.
-
I got the 2.2 mm brass pins from rotokid: http://rotokid.sosakonline.com/index.php?option=com_frontpage&Itemid=1
I'm probably going to go back to Quality Hardware sometime and see if I can find them again since they worked so well. If I'm able to get more I'll post some pictures and report the size. Best thing was they were only like .22 cent a piece.
Edited to add:
Almost missed that last part. It's a limited run Carbon Fiber Spyderco ParaMilitary 2. My favorite EDC knife. I wish I could get a back up, but the last one I saw on ebay was buy it now for 450 :O when the original MSRP was around 169 I think. I think they run at about $100 or so for the G10 version.
hi again bodie, i walked down the hardware isle at home depot today looking for ideas:
did you buy screws or bolts?
-
-
@nuphoria said:
Excellent work on the black CT - great set up. Can see it being very useful indeed :)Thanks!
Yea, that one is pretty sweet. That's the one that inspired me to do my first mod, except I put in a serrated blade and left off the scissors. Then after some tinkering I realized I could replace the blade with scissors, which was perfect for me since I'm always carrying my Spyderco anyways :D
@WiSAKfan said:
hi again bodie, i walked down the hardware isle at home depot today looking for ideas:did you buy screws or bolts?
It was a pan head style bolt.
@WiSAKfan said:
it's def still a cybertool, maybe THE cybertool...
THE CyberTool. Haha, I like it. It has a nice ring to it.

-
thanks i'll keep looking
i might have to start carrying a caliper around

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
