What is this?
-
Sadly I tend to be* very* sceptical about anything that is shipping out of Hong Kong. :-\
-
I am too but i kinda feel like i should give some a chance. Surely they all cant be crooks?
The colour of mine are a TI gray colour. Are the ones known to be genuine this colour too or were they a black oxide colour?
Ahh now look at this one here. Pliers? i did not think there was a pliers model?

This pliers one looks different. Look at the pivot rivet. my Solstice looks the same in this link though
Wish someone has done an in depth study on any of this fake stuff, how to tell real from fake apart and where its originating from exactly. Some of this stuff is very very good. Nothing is jumping out at meand saying the Soltice in my hands is not real.
The box shown in link/photo above is what mine came in. There may be a logical explaination for all this and maybe there is not some big grand operation of fake Gerbers out there. If there is i dont know why Gerber does not shut it down them selves, or maybe they dont care?
-
@Cyclone82 said:
There may be a logical explaination for all this and maybe there is not some big grand operation of fake Gerbers out there. If there is i dont know why Gerber does not shut it down them selves, or maybe they dont care?They probably pop up faster than Gerber can shut them down. It's really no effective way of stopping them as long as their home turf don't care about forging of foreign brands.
-
Over night i had an email from someone saying that they had a real Gerber Solstice and its not 'one of the fakes out there' So apparantly there are fakes out there. I might have the chance to get a real one to compare and then hopefully i will know for sure. I will be very annoyed if i got fakes though. i will leave neg feedback thats for sure. Its a shame if it ends up true though because this tool proves to me that they can make a decent quality tool if they want to so how about rather than coping something else, to use their brains and come up with a new legitimate design and for the ones that are making tools for USA companies, how about they up their quality a bit. If counterfiet compaines can produce a tool thats so good then they should be able to aswell.
-
The plier version is and isn't legitimate. It's kind of an odd story really, and I'm not certain I have all the facts straight myself so feel free to correct me if I have it wrong somewhere.
The same company that made the Solstice for Gerber also made a plier version but Gerber never licensed them. So, they were produced by the same company that made the Solstice for Gerber, but they aren't actually Gerber models.
At least that's my understanding anyway.
Def
Sent from my MB860 using Tapatalk 2
-
Interesting
response below from ebay seller when i questioned why the different box
*[**i]Hello! Thank you very much for your email and purchase.
I am very sorry for the confusion. The item is 100% original and you can bring to any Gerber dealer for checking. The shortcut box was supplied since the Gerber company does not print the Solstice box(All the Gerber boxes are now being printed in US to support local economy. Since the item is from the factory directly, they only have the shortcut box (they used to produce shortcut box for Gerber but not Solstice since it has already produced in US when launched).
I feel terribly sorry for the inconvenience it caused to you. I hope for your kind understanding. If it is something that concerns you, we can offer a 10% discount to you.
Have a good evening.
Warm regards,***[/i]
One has to ask though, why are there seemingly still 100's of these things suposedly availbel direct from the factory, yet they are not being imported and sold through Gerber USA still??? This tool seems pretty damn available to me for a discontinued tool.
-
Possibile scenario ...
Gerber designs a tool
Gerber commissions a factory to make the tool
Gerber sells the tool
Gerber decides to stop selling the tool, and stops placing orders on the factory...
Factory still has the tooling

...
Factory decides it's going to carry on making them as they made money on them when Gerber were buying them, so now they can make the money before plus some of the margin Gerber were making. They continue to put Gerbers name on it to give the tool credibility and stop it looking like a cheaper knockoff even if materially it's the same item. That's why they end up in a box for a later model - they are not legitimately in production anymore. Gerber gets no money for these items even though it's their design and bears their name and logo etc. By the time Gerber discover and take action there's tens/hundreds of thousands of these that have been produced which will be sold off via various outlets.
Look hard enough and you'll find several tools out there that appear to have had a similar story IMO. Cattlemans Ranchhand, Buck X-Tracts and others I can't recall offhand
-
Interesting scenario which seems plausable. Its still suspicious how they strategically position the box so you cant see it says 'shortcut'
For what its worth after a day the swinging screw drivers have gotten loose and swing past the scissors, at least the flat bade anyway. I will admit though that i have contributed to this greatly, kinda a torture test. Theres no detent to hold them closed, its only relying on a tight rivet? I Wanted to know if there was a screw inside that i could tighten it up but i cant get the spring out to see if there is a screw in there or if its just a rivet. After a dozen or so times of opening the tool up i could feel the resistance getting weaker, it was really tight when new, so i thought i would see how much they would loosen up. Seems to only be relying on a thin wave washer really. Bit of a crappy design really if it loosens up this quick. I wonder if the Swiss + Tech tools loosen up this quick as they are done the same way i believe.
I will still aim to get a new in blister pack one that is old stock from someone who promises its not a fake and sells a lot of knives and was well aware of the fake stuff and filled me in on just the lengths these knock of companies will go to make fake copies of tools/knives and its usually the cheap stuff they knock off too. Then i will compare the 2 side by side. I recall reading somewhere that the knock off tools have a spun/machined finish on the riveting which is clear on fake leatherman super tools and micras that use those rivets. This Gerber has the same spun look on the rivet for the scissors and not a brushed or bead blasted type finish.
I also got black nylon sheaths with these Solstices too. All the old online shops that still have the Solstic listed but discontinued say they are 'Fiskars scissors'? made in Finland? Doubt it.
To be honest i doubt Gerber really cares much about fakes of their products, but like it was said earlier, probably not much they can do about it.They seem like a massive company with a lot of marketing power and are really cashing in on the Bear Grylls stuff. In some junk mail out doors fishing type catalogue i got in the mail box the other day, there was this big double page spread entirely dedicated to the Bear Grylls range. They are really pushing that stuff to the consumer. Do you have a lot of Gerber TV comercials in USA?
I also emailed Leatherman weeks ago enquiring about possility of buying fakes and wanted them to confirm a plier head design for me but i never heard nothing back. Same again, probably dont care.
-
@Cyclone82 said:
I am too but i kinda feel like i should give some a chance. Surely they all cant be crooks?The colour of mine are a TI gray colour. Are the ones known to be genuine this colour too or were they a black oxide colour?
Ahh now look at this one here. Pliers? i did not think there was a pliers model?

This pliers one looks different. Look at the pivot rivet. my Solstice looks the same in this link though
Wish someone has done an in depth study on any of this fake stuff, how to tell real from fake apart and where its originating from exactly. Some of this stuff is very very good. Nothing is jumping out at meand saying the Soltice in my hands is not real.
The box shown in link/photo above is what mine came in. There may be a logical explaination for all this and maybe there is not some big grand operation of fake Gerbers out there. If there is i dont know why Gerber does not shut it down them selves, or maybe they dont care?
That pliers model does look neat, actually.
-
They do look neat and I am tempted to get one myself, even though I know for a fact that they aren't Gerbers. I remember Bob posted a pic of it a long time ago and I was drooling over it then. Not much has changed.
I really like these small plier tools like this one, the old Sebertech/IDL tools and the Swiss*Tech offerings. They are extremely solid and pack a lot of function into a small package.
Def
-
@50ft-trad said:
Possibile scenario ...Gerber designs a tool
Gerber commissions a factory to make the tool
Gerber sells the tool
Gerber decides to stop selling the tool, and stops placing orders on the factory...
Factory still has the tooling

...
Factory decides it's going to carry on making them as they made money on them when Gerber were buying them, so now they can make the money before plus some of the margin Gerber were making. They continue to put Gerbers name on it to give the tool credibility and stop it looking like a cheaper knockoff even if materially it's the same item. That's why they end up in a box for a later model - they are not legitimately in production anymore. Gerber gets no money for these items even though it's their design and bears their name and logo etc. By the time Gerber discover and take action there's tens/hundreds of thousands of these that have been produced which will be sold off via various outlets.
Look hard enough and you'll find several tools out there that appear to have had a similar story IMO. Cattlemans Ranchhand, Buck X-Tracts and others I can't recall offhand
This sounds very plausible to me. Long as short of it is that you'll likely get a decent enough tool, but it won't be backed by Gerber's warranty.
-
@Grant Lamontagne said:
The plier version is and isn't legitimate. It's kind of an odd story really, and I'm not certain I have all the facts straight myself so feel free to correct me if I have it wrong somewhere.The same company that made the Solstice for Gerber also made a plier version but Gerber never licensed them. So, they were produced by the same company that made the Solstice for Gerber, but they aren't actually Gerber models.
At least that's my understanding anyway.
Def
Necrothread revival.
The (unauthorised) pliers version of the Gerber Solstice is still available on ebay (although the seller I bought from doesn't have any currently listed). Not bad quality for the price.
-
@Grant Lamontagne said:
The plier version is and isn't legitimate. It's kind of an odd story really, and I'm not certain I have all the facts straight myself so feel free to correct me if I have it wrong somewhere.The same company that made the Solstice for Gerber also made a plier version but Gerber never licensed them. So, they were produced by the same company that made the Solstice for Gerber, but they aren't actually Gerber models.
At least that's my understanding anyway.
Def
Sent from my MB860 using Tapatalk 2
OK, I know that this is super necro-thread stuff at this point, but I felt like I should share.
Your explanation for this makes perfect sense. I was SO in love with the small swiss tech micro tools back around 2002. I used to carry the little black pliers everywhere since I couldn't take a blade to school. (without consequences) The first 2 that I bought were incredible, very high-quality strong build. Then after my brother lost my swiss tech I tried replacing the pliers 3 times from 3 different stores, all brand new. It seems that over the years their products started getting a lot worse because I now own 3 garbage swiss tech pliers in various states of damage. After the last one broke I gave up on these pliers and went to the Leatherman Style PS. :D
Back in the early 2000's, my brother bought me a Gerber Solstice from a sporting goods store. I could tell right away that it was made with excellent quality. Although I loved it, I rarely ever carried the Solstice because I just don't use scissors that much. :-\
About a week ago I stumbled across the plier version of the Solstice on Ebay and my first thought was "Gerber's going to sue somebody!" It didn't say Gerber on it and I immediately thought that it was a knock-off but the picture showed it using the same design as Gerber. I bought it for $5 figuring that it cant be any worse than the current Swiss Tech stuff. (And Who knows? maybe it will be the perfect little keychain multitool) Imagin my surprise, yesterday, when I open a package in the mail and a tiny Gerber box falls out. Inside is my multi tool that has Gerber Solstice printed on it just like the OG Solstice! :ahhh
I spent about 30 minutes last night trying to find some sort of info about Gerber making a plier version of the Solstice with no luck. Then today I stumbled onto this old thread. If your info is correct, it would certainly explain how this multi tool came about and why there is so little info about it anywhere. It also explains the excellent quality of the tool.
The spring makes a creeky sound but other than that I would say that it feels almost as good as the real Solstice. Certainly better than any garbage brand $3 ebay multitool pliers that you see being sold by the dozens. I feel like I can put far more pressure on these pliers than the Leatherman Style PS. -
I forgot this one :D
-
That's a great little find there.
I wish I'd gotten my hands on one now. -
FWIW, after 1 year and some months, last August my Gerber DET Fake blew up. Both sliding panels bent irreversibly and the handles bent like cheap pot steel under heavy pressure. Their shape and the way they bent made them impossible to repair without replacing both handle sections. I also broke the tool springs in handle and the DET spike bent at the pivot in a
wayI finished the job with my old LM Core, and I'm sure a real MP from Gerber would've been up to the task
this was ots last picnot worth the $10 I say now...it really felt solid when i bought it, more than it actually was...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login