Replacing Outer Blade Layer Liner
-
I recently acquired a newer Camper in which the blade layer was extremely stiff despite repeated cleaning and soaking in various lubricants and solvents. On disassembly, I discovered that the outer liner was extremely corroded, to the extent that the aluminum was actually flaking off in some areas. Thus, reassembly requires a replacement liner. As I see it, there are only two options: requisition a suitable liner from a sacrificial knife or fabricate a new liner.
I prefer the second option but there is, of course, a problem. The newer, outer blade layer liners have the indent to accomodate the thinner large blade tang. I don't think it's possible to effectively replicate the indent in a home workshop, at least not in mine. A possible solution would be to place a shim washer between the blade tang and liner. I measured the difference in thickness between the liner and liner with indent as being .013". I measured the difference in thickness between the newer blade and an older blade (crossbow tang-stamped) as being .016". So, I would think that a shim washer in that ballpark (.013-.016") would allow the use of a non-indented liner with a newer thin-tang large blade.
I was hoping that somebody who has tried this solution (I can't believe that I would be the first to think of it) could chime in on it's suitability before I go to the trouble of fabricating a replacement liner.
-
PM me your address I can throw some liners in the mail for you. I rip apart new swiss champs for parts so I have many liners of all the types and shapes, and I wont use up all I have. The new ones have the dent like you mention for the blade.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login