Show off your Sak mod's!
-
It's true. A perfect pin stock match is key for a good snap.
I get my 2.2 brass pins from a model company named Modelcraft. They sell 2.2mm.
-
I believe I may have a solution to size problem. I may make a special die to cut thicker brass rod down to size. The only thing holding me back is waiting for my friend at the machine shop. But once I get the drawings done, I'll share them here :)
-
@WiSAKfan said:
couple questions for you bodie-
can you provide more info (and pics if possible) of the screws you found? i'd love to try tracking some down tomorrow
-
where did you get 2.2mm pin stock? i thought that was the holy grail of sizes and we were stuck sanding 2.5 (or 3/32) down?
thank you!
oh and what spyderco model is that?
-
I ended up krazy gluing the handles on since I didn't think I'd be popping them back off. I found them at a store called Quality Hardware in Thomasville, NC. I'm not even sure what size they are. I just showed them the the scales of a SAK and asked them to help me find the closest thing that would fit. I originally only got them to temporarily put the knife back together to ensure that everything was working properly before putting the pins in. Then I realized that the scales would pop on and decided to just leave them. The side with the bolts was really tight. It took everything I had to mash them on with my fingers. When I put the black ones on I used a vice.
-
I got the 2.2 mm brass pins from rotokid: http://rotokid.sosakonline.com/index.php?option=com_frontpage&Itemid=1
I'm probably going to go back to Quality Hardware sometime and see if I can find them again since they worked so well. If I'm able to get more I'll post some pictures and report the size. Best thing was they were only like .22 cent a piece.
Edited to add:
Almost missed that last part. It's a limited run Carbon Fiber Spyderco ParaMilitary 2. My favorite EDC knife. I wish I could get a back up, but the last one I saw on ebay was buy it now for 450 :O when the original MSRP was around 169 I think. I think they run at about $100 or so for the G10 version.
-
-
thanks bodie!
yeah that spyderco looks sweet!
-
Excellent work on the black CT - great set up. Can see it being very useful indeed :)
-
I have one too.

-
couple questions for you bodie
-
can you provide more info (and pics if possible) of the screws you found? i'd love to try tracking some down tomorrow
-
where did you get 2.2mm pin stock? i thought that was the holy grail of sizes and we were stuck sanding 2.5 (or 3/32) down?
thank you!
hi
oh and what spyderco model is that?
-
I ended up krazy gluing the handles on since I didn't think I'd be popping them back off. I found them at a store called Quality Hardware in Thomasville, NC. I'm not even sure what size they are. I just showed them the the scales of a SAK and asked them to help me find the closest thing that would fit. I originally only got them to temporarily put the knife back together to ensure that everything was working properly before putting the pins in. Then I realized that the scales would pop on and decided to just leave them. The side with the bolts was really tight. It took everything I had to mash them on with my fingers. When I put the black ones on I used a vice.
-
I got the 2.2 mm brass pins from rotokid: http://rotokid.sosakonline.com/index.php?option=com_frontpage&Itemid=1
I'm probably going to go back to Quality Hardware sometime and see if I can find them again since they worked so well. If I'm able to get more I'll post some pictures and report the size. Best thing was they were only like .22 cent a piece.
Edited to add:
Almost missed that last part. It's a limited run Carbon Fiber Spyderco ParaMilitary 2. My favorite EDC knife. I wish I could get a back up, but the last one I saw on ebay was buy it now for 450 :O when the original MSRP was around 169 I think. I think they run at about $100 or so for the G10 version.
hi again bodie, i walked down the hardware isle at home depot today looking for ideas:
did you buy screws or bolts?
-
-
@nuphoria said:
Excellent work on the black CT - great set up. Can see it being very useful indeed :)Thanks!
Yea, that one is pretty sweet. That's the one that inspired me to do my first mod, except I put in a serrated blade and left off the scissors. Then after some tinkering I realized I could replace the blade with scissors, which was perfect for me since I'm always carrying my Spyderco anyways :D
@WiSAKfan said:
hi again bodie, i walked down the hardware isle at home depot today looking for ideas:did you buy screws or bolts?
It was a pan head style bolt.
@WiSAKfan said:
it's def still a cybertool, maybe THE cybertool...
THE CyberTool. Haha, I like it. It has a nice ring to it.

-
thanks i'll keep looking
i might have to start carrying a caliper around

-
I have just finished the rebuilt of my GAK. I called it GAKL "Germany Army Knife Luxory" Only tools are original, the rest is brass and wood palisander. I need to polish it and then it will go to ebay.
Maybe...
Well, they say that imitation is the sincerest form of flattery so I must credit the above as the inspiration for the below...




But I decided to do something different for the back side...


The Runes are electro-chemically etched into the brass (well, they are in relief rather than being "into" the surface)
I decided to put them so they were upright when the blade was in use, but with 20/20 hindsight they would have looked better the other way up. C'est la vie.The runes are "Lorem Ipsum" text in a Dwarfish_Runes.ttf font I found on the interweb.
I hope by some random chance it isn't a powerful spell to summon the dead or something
-
very nice!!!

-
Again great mods here, I'm impressed!
Here my first try in a one layer (blade and nail file) SAK screwed together.

-
@Sunshineinwinter said:
Again great mods here, I'm impressed!Here my first try in a one layer (blade and nail file) SAK screwed together.

That's lovely. What wood did you use?
-
Ebony
-
did you use the "screws" from knifekits?
looks great.
edit are you concerned at all about possible cracking from the wood expanding/contracting from changes in humidity?
in Wisconsin, USA we deal with humid summers and dry winters, although i'm unaware how ebony handles these changes.
-
No parts from knifekits.
I used standard M 2 Torx screws, fastened with the help of brass tube and screw thread tapped by hand.
Ebony is very resistant to humidity changes by nature. Thats why it has a long history as knife handle material. But additionally I treat it with linseed oil which hardens after a while so that the wood is protected. Under normal circumstances no problems should arise. Under extreme conditions, I have no experiences. But I can change the handles, the advantage of fastening by screws.
-
thank you for the response and additional info about ivory.
time will tell.
i guess for extreme conditions having the wooden scales attached in the traditional cellidor hole manner and perhaps some glue would allow the wood more freedom for expanding/contracting.
-
For your viewing pleasure. A better photo of orange cerakote.


Enjoy!
-
@tattoosteve99 said:
For your viewing pleasure. A better photo of orange cerakote.

Enjoy!
A masterpiece >:D
Awesome job Steve
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login