And so it begins.... (My adventures into Alox!)
-
Most screws normally are heat treated. There is almost no force on the joint though, its all shear force on the pivot, and the splice goes in the middle of a big spring, usually the scissors, or if there are pliers I put it there. This is no tensile force on the pivot or joint at all.
-
I have this blue Super Electrician in my hands (thanks, Robert!) and I do not find it to be a brick of a SAK after all. It is about the same thickness like a Hardwood Huntsman (91mm) and significantly thinner than a cellidor Craftsman, for example. Weight is also less than a regular SwissChamp.

-
5 layers! What a brick! :D
I have this blue Super Electrician in my hands (thanks, Robert!) and I do not find it to be a brick of a SAK after all. It is about the same thickness like a Hardwood Huntsman (91mm) and significantly thinner than a cellidor Craftsman, for example. Weight is also less than a regular SwissChamp.

Here's a photo of said Huntsman alongside the Super Electrician:
More photos to come in the Swiss forum.
-
I was not referring to SwissChamps when I called it bricky. :P
I made a Farmer with scissors and it's really at the limit for EDC. -
EDC limits are different for each person. I have no problems carring this blue oversized Electrician in my pocket. In fact, just did that ::)
Also, my EDC was for many years a SwissChamp where again I had no problems having that in the pocket.
-
I still pocket EDC a cybertool 34 on a lanyard attached to belt.. I never notice it there or maybe Im used to it.
The only way to lighten up the wide alox models is to drop the heavy steel springs for Ti ones, but that's another project that I cant do yet.
-
5 layers! What a brick! :D
I have this blue Super Electrician in my hands (thanks, Robert!) and I do not find it to be a brick of a SAK after all. It is about the same thickness like a Hardwood Huntsman (91mm) and significantly thinner than a cellidor Craftsman, for example. Weight is also less than a regular SwissChamp.

Here's a photo of said Huntsman alongside the Super Electrician:
More photos to come in the Swiss forum.
I notice you added back a liner between the file and the saw. I know that wasn't done on the previous file/saw setup. Was that by request or did the lack of liner cause some rubbing issues or lack of stability?
-
5 layers! What a brick! :D
I have this blue Super Electrician in my hands (thanks, Robert!) and I do not find it to be a brick of a SAK after all. It is about the same thickness like a Hardwood Huntsman (91mm) and significantly thinner than a cellidor Craftsman, for example. Weight is also less than a regular SwissChamp.

Here's a photo of said Huntsman alongside the Super Electrician:
More photos to come in the Swiss forum.
I notice you added back a liner between the file and the saw. I know that wasn't done on the previous file/saw setup. Was that by request or did the lack of liner cause some rubbing issues or lack of stability?
The saws were placed by the master modder Syph007 each on their own layer by (my :D) request. I just like them this way.
-
Some more blue! :D This one also had Ti liners and keyring nub.




-
Lovely. Really got a craving for a little something blue :D
-
And a little more blue again today! :D This time a rancher with scissors.





-
One custom beauty after another

Here are my alox customs done by Robert /Syph007 so far:
-
Cool I think thats the most of my customs Ive seen together! Eventually I will have to start collecting my own mods. The nice thing is I get to build lots of different ones that people request so I get to see what configurations I'd like for myself.
Cheers
-
Looking forward for my turn to come!
-
Check out these beauties that arrvied today! A few custom made SAK blades in 154cm!! :D :D :D
Stock 93mm blade at the bottom of this pic.

We have some spear point, clip point and sheepsfoot.

Check out how thick these are!

The idea here is that these will go to making some old timer whittling type knives, but with SAK parts and one heck of a big strong beefy main blade. I think a big sheepsfoot down the middle and then awl and pruner or small blade along the side opening from the other end.
-
Admit it, you got tired of sanding down your thick springs. :D
-
-
Wow that's thick! JR
-
@MadPlumbarian said:
Wow that's thick! JRLOL ya. I can probably double as a pry bar, evac tool SAK. :D These arent heat treated yet, so I could thin one, but I kind of like how they feel. Thats not a SAK... THIS is a SAK!
-
Can you implement one of them into a 93mm Alox?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login