Show off your Sak mod's!
-
Ebony
-
did you use the "screws" from knifekits?
looks great.
edit are you concerned at all about possible cracking from the wood expanding/contracting from changes in humidity?
in Wisconsin, USA we deal with humid summers and dry winters, although i'm unaware how ebony handles these changes.
-
No parts from knifekits.
I used standard M 2 Torx screws, fastened with the help of brass tube and screw thread tapped by hand.
Ebony is very resistant to humidity changes by nature. Thats why it has a long history as knife handle material. But additionally I treat it with linseed oil which hardens after a while so that the wood is protected. Under normal circumstances no problems should arise. Under extreme conditions, I have no experiences. But I can change the handles, the advantage of fastening by screws.
-
thank you for the response and additional info about ivory.
time will tell.
i guess for extreme conditions having the wooden scales attached in the traditional cellidor hole manner and perhaps some glue would allow the wood more freedom for expanding/contracting.
-
For your viewing pleasure. A better photo of orange cerakote.


Enjoy!
-
@tattoosteve99 said:
For your viewing pleasure. A better photo of orange cerakote.

Enjoy!
A masterpiece >:D
Awesome job Steve
-
Looks fantastic.
-
Damn, orange and black is a nice look. I've got the orange SAK fever now!
-
That kool! Good job!! JR
-
Nice explorer Steve. How do you change the colour of the mag glass from grey? I have just done a set of walnut scales for mine and it would look better with the plastics In brown.
-
Cheers. Think I will try it on a mini driver first.
-
i really like that orange !!

-
Well we can ask JaFromMn how it holds up, that's where it's going :)
-
Okay, here it is... my very first, well, I guess it's a mod... I put an inline phillips/mag-glass layer in a Compact, to make a Yeoman.

It's got one issue, which is that I used the thinner blade from my newer Compact, instead of the thicker blade from the pre '05 Explorer I used for parts.
Can anyone tell me if it's possible to yank just the pin on that end of the knife, pull the blade out, and put the older blade in, then install a new pin? I'm not real thrilled about the idea of taking the whole thing apart again, and I wouldn't have enough bushings left over to do that anyway.
Any thoughts would be appreciated.
-
Cool. Yes I have done it. Sharpen the pin to a sharp point and oil it. Then push down on the parts or springs, when pushing the pin in.
-
@GigaHz said:
Cool. Yes I have done it. Sharpen the pin to a sharp point and oil it. Then push down on the parts or springs, when pushing the pin in.Cool! Sounds like a good idea. I think I'll try that before redoing the entire thing.
Oh, that reminds me... are the scissor thicknesses the same for the pre '05 models and the new models? I don't see any issue with the scissors layer right now, but I'm considering an entire re-do so I can put the old style scissors with the screw in, instead of the newer ones with the rivet. So, do you know if the older scissors are thicker than the newer ones, or are they the same?
Thanks again for the encouragement and advice! This is turning out to be a lot of fun! :D
-
All the scissors Ive used, old and new are all the same thickness at 0.100 inches. Ive mixed and matched without any issue.
-
elk huntsman, leather lanyard and bull horn beads





Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login