Show off your Sak mod's!
-
elk huntsman, leather lanyard and bull horn beads





-
Lovely

-
Beautiful spine detail! JR
-
Great workmanship mate :)
Sent from my Nexus 7 using Tapatalk 2
-
thanks a lot folks

-
This is my Victorinox Hunter OE (Outdoor Edition)
Replaced corkscrew with phillips screw driver
Added can opener, crate opener, reamer, tooth pick, tweezers and a needleSorry for the bad quality of the fotos, I used my smartphone (and next time I will polish it before... maybe) ;)




-
@HankSolon said:
This is my Victorinox Hunter OE (Outdoor Edition)Replaced corkscrew with phillips screw driver
Added can opener, crate opener, reamer, tooth pick, tweezers and a needleSorry for the bad quality of the fotos, I used my smartphone (and next time I will polish it before... maybe) ;)




You must be outside the US. The Hunters here have the backside phillips instead of a corkscrew (and sadly dark green dual density scales).
-
@Mr. Whippy said:
You must be outside the US. The Hunters here have the backside phillips instead of a corkscrew (and sadly dark green dual density scales).Exactly. I bought this one:
http://www.sakwiki.com/tiki-index.php?page=Victorinox+Hunter+XT-CS known as Victorinox Hunter XT hereAnd in the US you have this one:
http://www.sakwiki.com/tiki-index.php?page=Victorinox+Hunter+XT -
@HankSolon said:
This is my Victorinox Hunter OE (Outdoor Edition)Replaced corkscrew with phillips screw driver
Added can opener, crate opener, reamer, tooth pick, tweezers and a needleSorry for the bad quality of the fotos, I used my smartphone (and next time I will polish it before... maybe) ;)




looks great! looks like functional knife there.
does the can opener lock like the OHT or just a regular one like on the Hercules?
-
@WiSAKfan said:
looks great! looks like functional knife there.does the can opener lock like the OHT or just a regular one like on the Hercules?
Thank you. I really like it. It's a compromise between size and having all tools i basically need.
I used the layer with can opener, crate opener and reamer (including lock for blade and crate opener) of a 2008 Soldier knife http://www.sakwiki.com/tiki-index.php?page=Soldier+2008 it's like this here http://www.sakwiki.com/show_image.php?id=1062.
-
nice! i like the added security of the locking bottle opener...
did you that swissbianco is now making clips for this model?

http://swissbiancocanada.com/Newsletter/SwissBianco_NL_2012_6.htm
-
@HankSolon said:
This is my Victorinox Hunter OE (Outdoor Edition)Oh, hello, that is nice. For some reason I see that getting used well.
-
@WiSAKfan said:
nice! i like the added security of the locking bottle opener...did you that swissbianco is now making clips for this model?

http://swissbiancocanada.com/Newsletter/SwissBianco_NL_2012_6.htm
I was checking these out a while back.. It kind of worries me that the scale might come off if you attach the knife to something with a clip like that?
-
@Northern Geek said:
nice! i like the added security of the locking bottle opener...
did you that swissbianco is now making clips for this model?

http://swissbiancocanada.com/Newsletter/SwissBianco_NL_2012_6.htm
I was checking these out a while back.. It kind of worries me that the scale might come off if you attach the knife to something with a clip like that?
Totally agree. That may work in short term, but I can't believe long term it wouldn't just pull the scale off. Now... if you had a metal plate inside like they use, but that the main rivet goes though, then this screws into it, that would be very strong.
-
That's similar to the way I did the super soldier. But what I did was to drill and tap screw holes in the liner and used a threaded bushing as a spacer. Much tighter IMO and as far as I know it's still holding strong.
-
@tattoosteve99 said:
That's similar to the way I did the super soldier. But what I did was to drill and tap screw holes in the liner and used a threaded bushing as a spacer. Much tighter IMO and as far as I know it's still holding strong.Oh right you did use a clip like that I forgot. If you got attached to a liner I would think that would be strong enough.

-
Great mod Hank.

-
Another bladeless wonder :D:






It's basically a CyberTool 41 that is 2 layers thinner minus the blades and awl.
-
My first “real” SAK mod: a Special Mechanic. This one was modded from a regular Mechanic and a sacrificial cellidor Bantam. The Bantam’s Combo Tool was drilled out after a lot of advice from Syph007 and others in this thread: /topic/40793 Since the keyring attachment point was lost with the Opener Layer backspring, a new birdhead spacer (the Tinker/Spartan style with the keyring loop) replaced the original. Thanks to tattoosteve99 for the spacer.
The blue scales were acquired from CVW via ebay. The Vic logo is on the cutout Phillips scale so they beg the question: are these fakes? On every knife I’ve seen, the logo is on the non-cutout side. These do have “Victorinox” stamped/molded in reverse relief on the inside of the tweezer slot.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
