SAK cybertool 31
-
Excellent!!
I have a CT41 and don't want to remove anything... Also would like to have CT34 but, IMHO I'll end up with CT29 and mod it to add scissors!!
That would be just right!
-
I'd have kept the pliers and lost the openers layer instead, and replaced the small blade with a combo tool.
I'm now wanting to do a bladeless SAK for my son so he can have it with him at school. I'm thinking a 34 with the blades layer removed might be a good choice.
-
I think the Combo tool can't replace the openers. It lacks sturdiness and the small flat head phillips driver.
-
@crackout said:
I think the Combo tool can't replace the openers. It lacks sturdiness and the small flat head phillips driver.You get small flat head and phillips drivers with the bits on the CT, so losing the openers isn't a big deal unless you really need/use the reamer or the wire stripper. You would lose the large flathead on the bottle opener, but who's seriously going to try to fully tighten a flathead that large with a SAK?
-
Ah, yes. For the CT it's fine. But in general the small flathead is golden. :)
-
@crackout said:
Ah, yes. For the CT it's fine. But in general the small flathead is golden. :)Yeah, I guess it's all about your usage needs.
I encounter little phillips screws in my life a lot more often than little flatheads... I do a fair amount of battery swaps in my kids' toys. 
But, we're MT.O'ers... we'll always have a spare/backup/second tool on us for just such occasions, so it's all good! :D
-
@Heinz Doofenshmirtz said:
I'd have kept the pliers and lost the openers layer instead, and replaced the small blade with a combo tool.I'm now wanting to do a bladeless SAK for my son so he can have it with him at school. I'm thinking a 34 with the blades layer removed might be a good choice.
I'm working on another bladeless SAK. I did a CT mod that paired the scissors in with the combo tool and bit driver, but here lately I've been missing the pliers. Even though they are small they still come in handy for certain things. The one I'm working now is a CyberTool 41 with the main blade replaced by the saw and the small blade replaced with the combo tool. So it's basically a CT 41 that two layers thinner without the blades or awl. I really like the combo tool, it seems like the CTs should come stock like that since they have the bit driver.
-
@Heinz Doofenshmirtz said:
Ah, yes. For the CT it's fine. But in general the small flathead is golden. :)
Yeah, I guess it's all about your usage needs.
I encounter little phillips screws in my life a lot more often than little flatheads... I do a fair amount of battery swaps in my kids' toys. 
But, we're MT.O'ers... we'll always have a spare/backup/second tool on us for just such occasions, so it's all good! :D
Check out the 'bare necessities' SAK mod I had Tattoosteve make for me. Sounds like exactly what you are talking about (or close to it).
-
@Heinz Doofenshmirtz said:
I'd have kept the pliers and lost the openers layer instead, and replaced the small blade with a combo tool.
I'm now wanting to do a bladeless SAK for my son so he can have it with him at school. I'm thinking a 34 with the blades layer removed might be a good choice.
I'm working on another bladeless SAK. I did a CT mod that paired the scissors in with the combo tool and bit driver, but here lately I've been missing the pliers. Even though they are small they still come in handy for certain things. The one I'm working now is a CyberTool 41 with the main blade replaced by the saw and the small blade replaced with the combo tool. So it's basically a CT 41 that two layers thinner without the blades or awl. I really like the combo tool, it seems like the CTs should come stock like that since they have the bit driver.
I was looking at that... nice work!
Looks like it'd be close to a solution for what I'm thinking about. Only issue is I'm not sure the saw wouldn't cause problems in a public school either.
Whatever. I'm not going to try and put anything in on the opposite end of whatever I put in the blade layer; just to keep it as simple as possible, I'm going to leave the openers layer in. Starting with a CT 41 makes more sense than trying to do it with a 34; thanks for the info! -
Thanks!
No kidding. They'd probably say the saw was a deadly weapon, haha. Stupid zero tolerance policies.
-
i would predict the saw to be a no-no as well.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login