Paladin PT-540
-
Well my alternative is the old standby of just going back to a Swisstool. I'd kinda like to go the full size route, but I want the thinner pliers of the Spirit. I agree that a dedicated punchdown, strippers what have you would be better, but the Paladin is just cool lol. I'll have to give it some consideration. I always carry tools everyone else say are too big for EDC, but the 540 really is a beast even next to a full size Swisstool from what I've seen. Gah. This is why I stopped coming on here much, because the answer is always BUY BOTH!

-
It's not just about the dedicated tools being better; it's about this tool being that large that I wouldn't want to let anywhere near the confined spaces of a datacenter... :) And did I mention it's big? Yes sir that it is! :D
Just out of curiosity, which of the implements on the 540 do you expect to use the most?
-
The PT-540 is cool I'll give you that. That's exactly why I got one, but once I got it was amazed at its ingenuity, impressed with its build quality, but absolutely certain that I would never carry it.
I'd still get one if I were you but if possible try to hold one in your hand first.
-
See that's where my entire argument falls apart. I'm really not sure what I would use the most. I would imagine the pliers/strippers, which can be had easier cheaper elsewhere. And seeing as I still think SOG's drivers suck Smurf's smurf I'd likely always wish I had a Swisstool. Thing is there's a lot of infrastructure expansion/improvement going on and having the strippers and punchdown right there handy could turn out to be a huge plus. Maybe I should say "eff it" and get another Spirit X. All I know is the Workchamp I've EDC'd for over a year now isn't going to cut it any more. I keep needing pliers lol.
-
@thebullfrog said:
Been digging around Google and everything comes up as "out of stock". My best bet will probably be to hope a used one in good shape pops up.If you really want one, dig a bit harder (increase the strength of your "google-fu"), and try varying your search a bit eg
paladin 540 or pt540 or "pt-540"
powerplay 540 or pt540 or "pt-540"
greenlee 540 or pt540 or "pt-540"
I'm sure I've seen a few US companies selling them recently, but for prices in the range $180 -240
Some also had them in some kind of kit (which was even more expensive :o)
-
lol, yes I've used all those terms. I have come across that kit a bunch of times. Never seen prices that high ($140 was the highest, and that was with the kit) but they all firmly state they no longer have it available. I'll likely just keep my eye out on E-Bay for now, I'm thinking of just hitting Tim up for some new Swiss goodness in the meantime. Or just Lego my Powerlock. Realistically I'll do all of the above lol.
-
@thebullfrog said:
See that's where my entire argument falls apart. I'm really not sure what I would use the most. I would imagine the pliers/strippers, which can be had easier cheaper elsewhere. And seeing as I still think SOG's drivers suck Smurf's smurf I'd likely always wish I had a Swisstool. Thing is there's a lot of infrastructure expansion/improvement going on and having the strippers and punchdown right there handy could turn out to be a huge plus. Maybe I should say "eff it" and get another Spirit X. All I know is the Workchamp I've EDC'd for over a year now isn't going to cut it any more. I keep needing pliers lol.FYI the strippers on the pliers are close to useless, as the compound leverage makes it only too easy to overdo it and cut through the wires as well, as opposed to just their housing. For the punchdown tool, you might be better off mod'ing one in some other tool as in this instructable, or using the idea in the link and creating a set of punches for various sizes to fit in the LM bit adapter, or go with a dedicated one anyway. :P As I said, I'd happily get the PT-540 off my hands, but it will probably end up in your drawers instead of mine. ;) Just my €0.02...
EDIT: Did a little google'ing and came up with several companies producing punchdown bits, including a multi-screwdriver by Klein. Maybe you could use the bits on a standard multitool via some 3/8'-1/4' adapter, if you're so inclined on going that way. SOG/Paladin are also producing a wire stripping implement (clicky), but I have never used it so can't vouch for it.
-
You know Nikos, that's something I didn't even think of. I cut too deeply often enough as it is, let alone with the almighty Gears of SOG backing me up. That home-modded punchdown is pretty nifty. Now I really am getting ideas.....
Edit for your edit: I do have that stripping implement in my Powerlock actually. It "works" but it's a bit fidgety, and is fairly limited in it's maximum size. Maybe some stand alone punchdown bits in an adapter would be workable.
-
This thread will soon be going into the mod squad under "what have I done now" ;)
-
haha, quite possibly
-
My job is done then... :D
-
@thebullfrog said:
You know Nikos, that's something I didn't even think of. I cut too deeply often enough as it is, let alone with the almighty Gears of SOG backing me up. That home-modded punchdown is pretty nifty. Now I really am getting ideas.....Edit for your edit: I do have that stripping implement in my Powerlock actually. It "works" but it's a bit fidgety, and is fairly limited in it's maximum size. Maybe some stand alone punchdown bits in an adapter would be workable.
How about a Leatherman Squirt ES4 for wire stripping ? It's small size may reduce your tendency to cut too deeply

-
@thebullfrog said:
Thing is there's a lot of infrastructure expansion/improvement going on and having the strippers and punchdown right there handy could turn out to be a huge plus.If you're comfortable disassembling/reassembling your current PowerLock, I can make this easy for you. I recently picked up a PT-510 just for the pointy plier head and gear covers, and plan to re-stuff the implements from my modded Pocket PowerPlier. I have no need for the Paladin punch-down/stripper implement, so if you PM me your mailing address, I'll drop it in an envelope and send it to you.
-
Honestly it's the 540's uber huge stripper filled plier head that interests me the most. Otherwise I'd just Lego my Powerlock into some 510 variation. Thank's for the offer though, I'm still fielding a few options on the plate. Gotta wait a few extra days until my next check anyway seeing as my car decided to take a dump on me lol.
-
I realize that this thread is 8 years old, but I have a brand new PT-540 with the leather sheath. If you're reading this you know it's no longer made. The Covid crisis has me selling off pieces of my multitool collection. First reasonable offer will get it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login