Leatherman Style ?
-
A 50th-trad said, buy a Rambler instead. It's much smaller and lighter and packs even more functionality without that clunky carabiner. Plus with Vic it's less likely to break on you - even though I hear they have great customer service too.
-
While I occasionally find Sawman's Leatherman-bashing annoying, I think in this case that he (and 50ft_trad) are right.
I have a Leatherman Micra, a Style PS, a victorinox Rambler, and a Classic. The Micra (and even my beloved SOG Crosscut) have chisel ground blades like the Style. They are fine, and very sharp out of the box, but they SUCK trying to resharpen. I actually reprofiled the Crosscut's blade because of this, it annoyed me so much. I think the 58mm Victorinox blade wins this contest.
The file/screwdriver on the Style (which is the same as the one on my Style PS)... The file is the same quality as you get on the Victorinox, but it is longer and thinner than on a Vic, so it flexes more under force as a screwdriver. The Victorinox is better (but the drivers on the Micra beat them both).
You already know about the scissors. Functionally (setting issues of breaking the spring aside), they are both very good little scissors, IMO.
The tweezers are about the same for functionality, IMO. I slightly prefer the bevelled edges of the Style's. They are both better than the Micra, and worse than those on the Crosscut (but not by much).
Weight on the Style is listed as 23g (.81oz) on the Leatherman site. A Victorinox Classic is 21g (.75oz) and a Rambler is 30g (1oz) by my scale. You're not going to notice the difference in any of these, realistically.
I'm not sure how the coating on the Style would hold up with pocket carry. The plastic scales of the victorinox scratch up, but that's it. Unless you drop them, they don't chip. And the scales can be replaced.
The Rambler has one more tool than the Classic, and sets it far above the Classic or Style. It has a small phillips driver/cap lifter. The phillips head is very slightly magnetic, so it's useful for picking up little metal objects (like little screws that fall in between computer boards, or if you get a pin or needle that rolls into a crack). And, as was recently pointed out to me, that little phillips driver will work on full size phillips screws, to my utter amazement.
The physical dimensions on the Style, compared to a Rambler are so close to identical that it is completely moot. And as has been listed above, the Rambler is a just a bit heavier.
It might sound like a small matter, but it comes in useful more often than one might expect... The Vics also have a toothpick.
-
I'd agree with nearly all of Lynn's comments. Personally I find the Victorinox scissors to be superior too. They'll both do the job just fine on threads and other little trimming jobs, but if I have to trim a nail I'd MUCH rather have the Vic scissors.
I'll also add in that I too can be highly critical of LM at times. I have praised their tools in the past and where I believe it's deserved I'll continue to do so, but I am probably one of the forums biggest critics of them. However, I do consider that I am on the whole very pragmatic with this. Example: P4 is a great little tool, but I have had QA issues with the blades hitting the liners and a dodgy file that had bald spots - otherwise an excellent little tool (GREAT design - sloppy manufacturing) ... but the Style just tries to be a Victorinox substitute and fails miserably.
I only say this in case anyone thinks I'm "just hitting LM again" - I'm not, I genuinely believe the Rambler is a vastly superior tool

-
The Style is different than the SAKs everybody else will have and is decent enough for the use it is intended; occasional. The one I have is nice but a lot tighter and harder to use than a SAK.
It can be had in nice colours too.I got one in a combo deal with an led lenser torch and it was cheaper than buying it on its own.
For the money it is worth a try.
Note that I have had some quality problems with my 1st Style CS so I hope that the style is better, though they seem similar in that way.
-
I asaked the same question a while ago and.......I still don't have one. ;) I wasn't totally put off though and might well still pick one up in the future. Plus I have a friend at work who swears by his.

-
When I saw the topic of this thread I was expecting something like this... Opaa !


-
that's just wrong!

-
:D :D
-

Wtf, guys.... eventually I'll save the money and buy a flashlight ... :X
-
We will get you to buy a Rambler eventually you know
and when you do you'll be asking "Why didn't they tell me to do this before? It's brilliant" ::):P :D :D
-
I love my Style CS*
*as long as I am also carrying a larger tool. That way, i never have to choose a large tool based on which has scissors, tweezers etc.
By the way, the tweezers are only there to assist with opening the blade.;)
-
A Vic rambler could help with extracting the blade on the Style. :)
I'm TOTALLY not of a one track mind. Nosiree-bob!
-
I have a couple of the Micras (one was blue but the paint wore off), and recently bought a Style CS from Amazon. I am very pleased with it. It is on my keyring with a Lenser P2. The tool scissor are excellent and the additional body length makes using them far easier than with a Micra.
I really like the styling too: black and brushed steel. It looks technical and designed by an engineer with a sense of its namesake.
I have a Skeletool Carbon, a Wave and a Juice too. If lost, I would replace each of them.
wellgate
-
@50ft-trad said:
Honest opionion? Buy a Victorinox Classic ... or even better, get a Rambler or Manager
@50ft-trad said:
N_N_R, remember the scissor problem you had on the other tool?@N_N_R said:
Yesssssss, I remember the scissors problemmmm :ahhh :ahhh :ahhh@Lynn LeFey said:
... he (and 50ft_trad) are right ...@50ft-trad said:
We will get you to buy a Rambler eventually you know
@Lynn LeFey said:
... A Vic rambler could help ...Any news?
....

:D
-
For me, in the same size range, I like the Gerber Dime much better. Better knife and pliers are precise enough to use as tweezers.
-
No, no news yet :D Thanks to YouUUUUUuu, I'm not buying anything. (yet)
-
How about now? ...
Now?
Have you got one yet?...
Now?
It is true that I have no patience and the attention span of...
Ooh, look, something shiny! (Lynn wanders off)
-
:D :D :D
Come on, it's enough that I've ordered one tiny USB flahslight and it won't arrive before Christmas and it won't arrive before the New Year, so I'll be torturning myself enough... I don't need yet another thing to wait for!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login