And so it begins.... (My adventures into Alox!)
-
I like the blade shape of the ones on the far left and far right (both ends). Either one would look cool on an alox!
Got any prices for them? :)
I have no idea what they will end up costing, this is all new to me. It's mostly a test to see how I like a custom blade, and trying heat treat and different shapes out. Someday I really need to learn to make blades too, but Im not there yet, so these were from a trade for a SAK custom from another blade maker.
Okay, it would also be nice to make a Solo with one of those blades! :)
-
Cool blades! Robert, what type of steel and who (if it can be disclosed) made/makes them?
Can you temporarily arrange a 93 mm alox frame in one of the configurations you thought off, not closed/finally assembled, just in place on the riverts/posts and one scale, and take a few pics from different angles to give us an ideea of how the new blades may fit in a 93 mm frame?

-
@Syph007 said:
Check out these beauties that arrvied today! A few custom made SAK blades in 154cm!! :D :D :DStock 93mm blade at the bottom of this pic.

We have some spear point, clip point and sheepsfoot.

Check out how thick these are!

The idea here is that these will go to making some old timer whittling type knives, but with SAK parts and one heck of a big strong beefy main blade. I think a big sheepsfoot down the middle and then awl and pruner or small blade along the side opening from the other end.
awesome!
that's taking it to the next level!
-
I'm almost caught up now on customs for others so I got to work on one for me last night. Cadet II with scissors. I have a few 84mm mods I want to make and collect, and this was first. Next is a regular cadet with scissors in red, and backside awl. I just about have that one fit up.





-
Lovely. Really good stuff

-
How's the backside tool working out? Do you think it would be possible to put a corkscrew on either a Cadet or a 93?
-
WOW!!!

I just caught up on 10 pages of new SAK mods...

I have SAKs in the mail to me... and then I can look forward to that mod we discussed.
Really nice work Robert! I think I could almost just buy SAKs from you now instead of ebay. I thought I was almost at that point, but last week I watched ebay for the week and had to pick up a few just because. One is a nice black one PVD coated. Since you seem to have the hard anodizing down, have you looked into PVD coating?

Now I have to see what Mr. Bushido has been up to.
-
@ICanFixThat said:
WOW!!!

I just caught up on 10 pages of new SAK mods...

I have SAKs in the mail to me... and then I can look forward to that mod we discussed.
Really nice work Robert! I think I could almost just buy SAKs from you now instead of ebay. I thought I was almost at that point, but last week I watched ebay for the week and had to pick up a few just because. One is a nice black one PVD coated. Since you seem to have the hard anodizing down, have you looked into PVD coating?

Now I have to see what Mr. Bushido has been up to.
I've only seen wenger blackouts do PVD, is that what you got, or is there a modder out there doing PVD?
For blacking thats the way to go, but mostly I like the shiny steel so I havent put much effort into trying, but its on the list of things to try someday.
-
@nj2656 said:
How's the backside tool working out? Do you think it would be possible to put a corkscrew on either a Cadet or a 93?The one set of alox scales I had made up with the corkscrew cutout, I messed up badly and didnt get to actually try that knife out. The scales are so thin there is barely enough room to have that hidden pin. I might just make some 84 Ti scales to gain some strength and try again.
-
Why not make it visible and use screws like on the others?
-
-
WOW!!!

I just caught up on 10 pages of new SAK mods...

I have SAKs in the mail to me... and then I can look forward to that mod we discussed.
Really nice work Robert! I think I could almost just buy SAKs from you now instead of ebay. I thought I was almost at that point, but last week I watched ebay for the week and had to pick up a few just because. One is a nice black one PVD coated. Since you seem to have the hard anodizing down, have you looked into PVD coating?

Now I have to see what Mr. Bushido has been up to.
I've only seen wenger blackouts do PVD, is that what you got, or is there a modder out there doing PVD?
For blacking thats the way to go, but mostly I like the shiny steel so I havent put much effort into trying, but its on the list of things to try someday.
It is a Wenger, but not any of the the Blackouts we've seen lately. This one is an earlier Porsche Design Edition-1 Traveler; it has a PVD coated main-blade, and PVD coated Ruthenium scales (they use Torx as well).
I agree though, for most applications shiny steel is what you want.
-
Would a back tool phillips work on an 84? What about a 91 corkscrew in a 93 frame?
-
-
Hey Syph007
In a few days I will have a cadet and a electrican tool, and I was wondering if you have tried to fit a sheepfoot blade into a 84mm tool? It doesnt matter if the scraper part was lost in the modification.. :)
Oh and is there a thread somewhere that lists the sizes/names on the screws ect. needed to assemble the tool after the pivots have been removed? I live in Denmark so its proberly metric if I can find them.
Thanks for any answers and all the nice pictures :D
/Alex
-
Hey, the electrician blade could be made to fit I'm sure one way or another. Maybe in the opener layer, but I have a feeling that blade is thicker than the openers, so it might have to go in a new layer.
I use standard 1/8 inch pivots and 2-56 threaded screws that I get from knifekits.com
-
Admit it, you got tired of sanding down your thick springs. :D
Ha, you dont know how true THAT is. I actually had a buddy at a machine shop surface most of my springs to scissors thickness as the by hand method was crazy.
I finally got my springs back from precision surface grinding. Money well spent to do this, because OMG the manual way I was doing was a very dreaded task.


-
Here is a different mod than normal. I had a request for a bladeless SAK.


Do to the pliers being adjacent to the cap lifter, the notch was inaccessible. I added a small cutout to the pliers body and it allowed perfect access.


-
Looking good Syph007!! Really good! JR
-
That is a smart looking knife! Very efficient too if one has a dedicated blade edc.
Nice on the springs as well. Are the the pin holes prefabbed to your standard or are they still metric spec (requiring more conversion work).
Cheers!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login