What Did You Use Your Multitool For Today?
-
A bit of a strange one... I got a Williams Sonoma catalogue in the mail today. I don't normally buy stuff from them, but have gotten a few things in the past, so I like flipping through their catalogues. But this one had its center spine staple half out, and sticking out kind of dangerously. I used my little Sheffield's pliers to pull the staple out.
Also, I opened a can of beef ravioli with the can opener of my Spirit X. Every now and then, I do this just to try to get more comfortable with the Vic can opener, since the Spirit X is the MT in my bug-out bag.
-
Used my Charge large flat screwdriver to pry the back off a moisture meter. It had fallen apart internally - the 25 year old sticky tape that had been holding it together had lost all its "stick". A couple of dabs of plastic glue and its back in action. :D
-
Today the MP600 Pro Scout was the champ.
I used the file to smooth out a burr on some shelving that cut one of the guys at work, the pliers fixed a wallpaper steamer, the quick connect on the hose was stuck. The can opener opened tint cans, and the Phillips driver tightened the clamp on my Lansky when my Sodbuster Jr. needed a touch up after busting boxes all day. Tried to use it to work on a turbine paint sprayer, and it got the housing off, but couldn't get the fan unstuck. :( A well-placed love tap from a steel toed work boot did the trick though... ::) -
Used the Skeletool CX to open up my home server cause of a strange rattle in it. Turns out my power supply is dying on me. :(
-
I used the large flat driver on my wave to pry off the side panel on my dryer today. The Teflon slides on the upper bearing had worn out and the lower felt seal came apart. I replaced them but discovered the green load bearing slides had also worn out and I was missing an adjustment leg and plate. So another $25 in parts after shipping bringing the total repair cost to $50. Cheaper than a new dryer!
Sent from a Galaxy S3 far, far away using R2D2.
-
Used my Balance for various tasks while putting up Christmas decorations.

-
Me and my brother have just just moved my parent's bedroom today, and had to fully dismantle the bed and wardrobes in the process, and of course put them back together again. Total dedicated tools were a small claw hammer, and an allen key. Most of the work was multitools though. Me armed with a Spirit X, and him armed with his CS4 (which was the one I had when I did my comparison with the Deluxe Tinker). On my part the philips, pry tool, small flat driver, pliers and chisel got the glory. I know he used the philips and pliers, but beyond that I'm not sure
-
Well it was yesterday, but my Style PS opened a bag a peanuts for a nice lady sitting next to me on the plane.

-
Use my Wingman to change the lint trap screen on my washing machine discharge hose. It was handy for clipping off the old zip tie and cinching up the new one. Nothing big deal really but it is always handy and easier than going into the tool box for a razor knife and small pliers.
I like my Charge Ti much better but the Wingman is a cheap, easy pocket carry tool for the little stuff.
Tony
-
Used my Dime to open up my Mossy Oak steering wheel cover and Mossy Oak seat covers for my Jeep Wrangler
-
:D
-
@JDO330 said:
Today I used my swiss tool spirit and my Topeak mini ratchet to build a unit from Ikea. Then I used my super tinker to make some boxes to post some eBay items (from recycled cardboard packaging from the ikea item).All good.
Atb, Jon.
Going green?¿?
Sent from my iPhone 4S using Tapatalk
-
For all Pockettool X(Leatherman) owners!! This morning I used the flat pry edge of my Piranha to scrap an extra thick layer of frost off the windows of my car.
Works far better than a regular scraper

-
I had to change out the fluorescent bulbs in a ceiling fixture and used my titanium .45 auto disassembly tool and prybar/bottle opener to pry open the stuck latches that let the hinged cover open up to expose the bulbs. Worked like a prybar. ::)
-
.
-
Yesterday my Handyman and Electrician plus got quite a work out . The saw and skinning blade on the E + were used to open up a live electrical box that had been drywalled over , and sported no cover ! I probed for it with a short fiberglass rod , and cut a small hole with the skinning knife to expose the top of the box , and get the saw into play .
The Handyman pen blade helped extract a bunch of small splinters , and took the outer jacket off a lot of Romex . I used the metal saw on the Handyman to cut the head off a badly camed out screw , so that another box could be extracted .
Chris
-
the large flathead screwdriver on my wave gets used every day (or four times a day) to undo the locks on the engine compartment of my truck.
BUT MORE IMPORTANTLY - Those scissors are the only way I can get into my bloody premixed caramel latte packets!
(Uhh, I mean. I skinned a crocodile....yup. )
-
I used my Gerber Dime to .... Open a beer or 3....open a bag of coal as it is getting quite cold and had to light my stove,and last but not least , open a box of cupcake mix for my daughter, YUMMY!!!
-
@Sea Monster said:
the large flathead screwdriver on my wave gets used every day (or four times a day) to undo the locks on the engine compartment of my truck.BUT MORE IMPORTANTLY - Those scissors are the only way I can get into my bloody premixed caramel latte packets!
(Uhh, I mean. I skinned a crocodile....yup. )

I used the serrated blade on my Wave today to slice off a low hanging branch that was bugging me in my yard.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
