What Did You Use Your Multitool For Today?
-
.
-
Yesterday my Handyman and Electrician plus got quite a work out . The saw and skinning blade on the E + were used to open up a live electrical box that had been drywalled over , and sported no cover ! I probed for it with a short fiberglass rod , and cut a small hole with the skinning knife to expose the top of the box , and get the saw into play .
The Handyman pen blade helped extract a bunch of small splinters , and took the outer jacket off a lot of Romex . I used the metal saw on the Handyman to cut the head off a badly camed out screw , so that another box could be extracted .
Chris
-
the large flathead screwdriver on my wave gets used every day (or four times a day) to undo the locks on the engine compartment of my truck.
BUT MORE IMPORTANTLY - Those scissors are the only way I can get into my bloody premixed caramel latte packets!
(Uhh, I mean. I skinned a crocodile....yup. )
-
I used my Gerber Dime to .... Open a beer or 3....open a bag of coal as it is getting quite cold and had to light my stove,and last but not least , open a box of cupcake mix for my daughter, YUMMY!!!
-
@Sea Monster said:
the large flathead screwdriver on my wave gets used every day (or four times a day) to undo the locks on the engine compartment of my truck.BUT MORE IMPORTANTLY - Those scissors are the only way I can get into my bloody premixed caramel latte packets!
(Uhh, I mean. I skinned a crocodile....yup. )

I used the serrated blade on my Wave today to slice off a low hanging branch that was bugging me in my yard.
-
I used my Swisstool Spirit to help me start my bike - a Yamaha XT - after three cold weeks unused and parked outside.
A couple of days ago...
After many (many) tries to start the engine, the battery finally gave up and the cylinder already had more fuel than it could burn... Hotwiring with my car, was enough for the starter to work but the excess fuel in cylinder was a deal braker...Today I tried again a bit more prepared. Using ST Spirit:
- Long flat screwdriver unscrewed the side plastics which cover the battery.
- Blade cut some tape which I placed on a straw to widen straw's "mouth" enough to fit under the carburator's overflow tip (ok, I could just do that with my hands or my teeth but, where's the fun in that :D).
- Long philips unscrewed the overflow valve so I could empty the carburator from fuel into a small plastic bowl (so I could turn fully ON the gas to give the cylinder all the air it wants to burn excess fuel, while clicking the starter, without adding more fuel to the cylinder. Also, fuel switch was turned off so it couldn't send any more fuel to the carburator).
Thankfully, all went well and my bike was running again in about ten minutes

Also used: battery hotwiring cables, a fire extinguisher (well, not really used but stayed there just in case :D ), glasses, my wife in car's driver seat keeping car's rpm a bit higher than default, my two daughters playing in the car and hitting the horn a couple of times >:D (little devils).
-
Hail to the Spirit

-
I used my swisstool sprit x today on assembling Christmas toys.
-
I used the scissors on my VIC DofE tool :tool: to change my mums leg bandage, VIC scissors are awesome

-
Fixed 2 laptops, an ATM, a kids toy, trimmed my toenails and opened my beer.
-
Used my gerber diesel to remove/replace a battery on a truck I had in storage. Worked great.
-
I used the scissors on my Deluxe Tinker to cut open an envelope that came in the mail which had a PS4 in it. I made pizza for supper and decided to try the can opener on the DT for some mushrooms and tried the can opener on my Juice S2 with the pineapple. Both worked well. I'm such a wild man. ::)
-
Used my Cadet SAK to remove and replace car tag. Used the small screwdriver tip on the can opener on + head screws. Works great on + screws.
-
I used my Juice S2 to take the cover off an electronic lock to replace the batteries.
-
A couple of weeks ago, one of the contractors we deal with broke his wrist. Today he came in to the store, complaining that the new cast he had put on today was too tight around his thumb. The MP600's file took care of that.
:) I took a pic, I'll try to post it later when I get home. -
Here's the pic I took. Just filed down the cutout for the thumb a bit, made it a bit more comfortable for him.
Plaster dust is a bit of a pain to get out of the file by the way...
-
Used the file/screwdriver on a leatherman style ps to pry up the drain stopper
on the bathroom sink.
-
I used the scissors on my SAK to cut open the cure and seasoning packages for some sausage I made today and used the file on my PS4 to take to corrosion off a battery terminal on a wall clock.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login