Show off your Sak mod's!
-
the ebony looks lovely.

-
Thx.

Cutting the space for the ballpoint pen was something like pain in the ass. There was only 1-1.5mm left, before accidently cutting through the scales. My intention was, getting the ebony scales as flat as possible, and it worked.

Only one thing I was thinking about is: getting the original cross into the scales (not onto them). But I tried on some dummy ebony scales (actually damaged parts), but I never got a perfect result. (i have no laser nor CNC)
-
nice, I don't think i've seen the inside of the 111mm before.
-
Me either... that's a brilliant shot

-
@HankSolon said:
This is a Victorinox Special Mechanic with Ebony Plus Scales (including needle and ballpoint pen).I originally wanted to extend this Special mechanic with an awl, but it would have been too fat for my jeans pocket. So I sadly, sadly discarded the idea.
Again photos made by mobile phone. Sorry for the bad quality.
Nice looking scales. I wonder, has anybody ever tried to flip the pliers on a Mechanic? It always bothered me that they open towards the keychain ring, I feel like that should open away, like the main blade.
-
This is a Victorinox Special Mechanic with Ebony Plus Scales (including needle and ballpoint pen).
I originally wanted to extend this Special mechanic with an awl, but it would have been too fat for my jeans pocket. So I sadly, sadly discarded the idea.
Again photos made by mobile phone. Sorry for the bad quality.
Nice looking scales. I wonder, has anybody ever tried to flip the pliers on a Mechanic? It always bothered me that they open towards the keychain ring, I feel like that should open away, like the main blade.
That would require a special made opposite sided spring.
-
Finished my latest one: a red Cadet with scissors and saw. No keyring.


Lovely!
-
looks good, and a handy tool set.

-
Nice stuff indeed... looks lovely in red :D
-
Hi!
So I finally listed my rebuilt GAK on eBay. If anyone is interested :), here is the link:
http://www.ebay.com/itm/Rebuilt-GAK-german-army-knife-Victorinox-manufactory-/221171122471?
-
If you would like to sell something on MTO, or link to your own sale elsewhere it would be better for you to put it on the sales threads please. Thanks :)
Lovely mod too

-
Put my old (square phillips driver, thick tang blade) 91mm tinker back together and on a whim, made up a bail to put on the end.
Would probably do it differently if I make a second one, but it adds a bit of charm to an old battler.

-
Nice job on the bail

-
@sparky415 said:
Nice job on the bail
+1 Good job there.
-
Ya that bail looks nice to me. How would you do it differently?
-
@Syph007 said:
Ya that bail looks nice to me. How would you do it differently?This one is made of three pieces, the ends are 1/16 (1.5mm) plate and the 2mm rod is tight in slots cut in the end. It's hammered flat before being soldered so the joint does have some mechanical strength other than just the solder, but you can see the silver colour against the brass.
I'm going to try making one like this...

the thick black line will be soldered, but with the short end grooved to fit around the rod I will be able to remove almost all of the visible solder and it doesn't have to be a strong joint because it won't be taking any great load.
It doesn't look it, but the hole in the middle is bigger than the rod. This was drawn to scale as a 2mm rod and hole for a 2.5mm pin.
-
This weekend i did some sorting an cleaning in my workshop and found some time to play around (it was more fun than cleaning...)
I tried a new finish on the scales of a beater Spartan that i use i mainly to pop of scales.
I used an old soldering iron to create a very grippy texture.
I think it´s called "stipling" in english.
It was a quick "proof of concept" rather than a well prepared job, so the edges are not defined clearly and the pattern is not very regulary (and i included some old dirt from the soldering iron´s tip...)
But the created finish is grippy and something i have not seen before on a SAK. you can use old, scarred and scratched scales, too.
I think if you carefully mark the outer edge or do the complete scale and use a nicely profiled, clean tip you can produce a nice, regular finish.Excuse the bad pics.
BTW, i practiced peening a bit by making a 1-layer 91 (blades and corkscrew).
the peening was really nice and i managed not to damage any bushings, only to find out i placed the blades on the wrong ends... So i had a little more drilling practice, too.I sharpened teh wire stripper in teh pictured beater SAK and think this is a nice and easy mod that will be made on my users. but I´ll sharpen teh side opposite the Nail nick next time. I used a Dremel with a diamond coated grinding bit.


-
This is my EDC a very used Victorinox Spartan, now with ebony plus scales. (pen and needle added).
I tweeked the can and bottle-opener a bit.
The cutting edge at the bottle opener was made whetting from both sides. That I wouldn't do again. One side is better (for skinning wires etc). The orange peeler is perfect. The originale straight shape is concave now and the edge is very sharp. I love it. -
@HankSolon said:
This is my EDC a very used Victorinox Spartan, now with ebony plus scales. (pen and needle added).I tweeked the can and bottle-opener a bit.
The cutting edge at the bottle opener was made whetting from both sides. That I wouldn't do again. One side is better (for skinning wires etc). The orange peeler is perfect. The originale straight shape is concave now and the edge is very sharp. I love it.Was it that difficult?
Great idea though
Were both done using the whetting?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

