The Black Tide (Ultimate BO Wave)
-
Sorry if you had said this in the post but is that a rebar's awl, and if so how did you make then fit? I am planning on making my charge have outside scissors, and was planning on putting an awl where the old scissors would be. Would that work, or will I have to make my own awl?
Sent from my A500 using Tapatalk 2
-
@Hypnos3510 said:
Sorry if you had said this in the post but is that a rebar's awl, and if so how did you make then fit? I am planning on making my charge have outside scissors, and was planning on putting an awl where the old scissors would be. Would that work, or will I have to make my own awl?Sent from my A500 using Tapatalk 2
You have to grind down the cutting edge a bit so that it sits lower into the handle, otherwise it jams on the Pliers a bit.
-
Oh okay great thank you.
Sent from my LG-P925 using Tapatalk 2
-
UPDATE
Pulling the ole switcheroo!
I was toying with the idea of switching the blades so I could have a left OHO SE blade, right OHO PE blade. I went ahead, which also means having the file on the OHO slot.
A slow, careful regrind of the locking surfaces and boom!


No more mistaking the blades now! Bonus is that the overall profile is slimmer.
-
Hey I see the awl in the tide. Did you have to modify anything for it to fit?
-
@tattoosteve99 said:
Hey I see the awl in the tide. Did you have to modify anything for it to fit?For the wave the cutting edge needed to be ground down a bit. Also the overall thickness of the bit driver needed to be reduced by .5mm to make it fit.
-
Hey I see the awl in the tide. Did you have to modify anything for it to fit?
For the wave the cutting edge needed to be ground down a bit. Also the overall thickness of the bit driver needed to be reduced by .5mm to make it fit.
Ahh ok. I like that idea. Maybe Santa will bring me a rebar :) but I doubt it :(
-
Originally I had ordered these grip plates for the Commander project but I also ordered a set of black for the Black Tide.
The thinner plate is a shaved down version of the T&T plate that didn't work out. These are doubled sided tapped on for now to see if these are good or need to be redesigned.
So far I love the extra grip, mild jimping and added visual fullness on the once empty side panels.



Because I shave down one of the plates, there is a small gap between them when the handles are out. Perfect. I know I need to thin out the over all dimension to make them fit in the MKII.

Great grip!!


-
Good idea there, Eric. How are you attaching them? I missed that part. JB Weld or something else?
-
Good idea there, Eric. How are you attaching them? I missed that part. JB Weld or something else?
right now some high strength double sided tape. I had a roll left over from when I worked in the design dept of a large print shop.
3M VHB maybe? Love that stuff.
-
No, it's thinner. The VHB is too thick. This stuff was used to stick signs up, can't argue with that.
-
I'm betting that makes the Wave more comfortable to hold.

-
Where's the t&t???
-
@tattoosteve99 said:
Where's the t&t???I underestimated the rivets height. The t and t fit, but not on the tool.
-
So, will this be a continuation for the Master project?

-
@stealth007s said:
So, will this be a continuation for the Master project?
Nah, the black tide is the black tide. The master and commander will be a Wave and Charge (SS).
-
Stick on jimping 8) 8) 8)
-
Great thread. Thanks for sharing. I went ahead and modded my Wave with the Rebar plier head. Alittle tricky being my first multi tool mod but it worked out great. I took out the scissors and modded the large flathead screwdriver bit from the Rebar. Shorten and tapered it. I moved the eyeglass screwdriver bit to where the scissors were and put the modded bit where the eyeglass screwdriver bit was in the handle. I may make the modded bit an awl.
Scott
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login