What Did You Use Your Multitool For Today?
-
I drive a refrigerated truck for a living at the moment, and the other day I was driving down a dirt road and as I pulled onto the highway, the wind caught the panel that covers the top of the condenser and yanked it up, right over the rings that hold it to it's latch posts. These are pretty stout split rings, and they got bent up pretty bad.
Seeing as how I can't drive the truck with that panel flapping around, I had to fix it. There are no tools on my truck but I always have my wave on my hip so I climbed to the top of my rig and took a look. The rings had been squished because they were pulled through the panel, so I had to use my wave's pliers to get them off the posts in order to close the panel. Then I threaded them through the eyelets and bent them so that the same thing couldn't happen again. While doing this I dropped one of them into the condenser compartment behind the motor. The space is only about an inch and a half wide, not wide enough for my hand, and the ring was about 6 inches in. I extended the handles on my wave and pulled out the can opener, and was able to hook the ring and drag it to where I could reach it.
Safe to say I would have been stuck if I didn't have my wave on me.
-
Yesterday at the store I used my MP600 Pro Scout to put together a Big Wheel for the daughter of one of the owners. Nice way to waste an hour on the clock..... ;)
-
Great uses, guys. As a smart person said not too long ago in another thread. THIS is why we do Multitools.

-
Split ring wrangling with some CT41 pliers - no nails broken :D
-
I used my Wenger Esquire as a gift. On my way to catch a flight home I realized I forgot my Esquire in pocket. Since I wasn't checking a bag I gifted it to an older gent attending the rental car return. His big smile let me know it was appreciated. -
Very nice of you.
Have a safe trip. -
I used my Dime to open some gifts and the Flair's pliers to move some meat around during the Barbecue.
-
Almost all of mine got used today to open presents. LMs, SAKs and knives.
-
Used my Old Gerber Suspension to cut the zip ties on my new hiking poles.
-
Last week I used my Crunch to assemble a bookshelf and anchor it to the wall. A few days ago I used my first issue Wave to assemble Christmas gifts for our grand-daughter. tom.
-
I used my Victorinox Electrician and Compact SAKs on Christmas for opening various items. Yesterday I used the small sheepsfoot blade on the Electrician to open a small makeup container for my wife.
-
Used my Rebar to pull Cotter Pins on my snow plow feet to adjust them.
-
My first day carrying my new Spirit X and.... nothing, no use for it at all. I need to go break something so I can fix it.
-
@thebullfrog said:
My first day carrying my new Spirit X and.... nothing, no use for it at all. I need to go break something so I can fix it.That's the spirit! :D
-
@thebullfrog said:
My first day carrying my new Spirit X and.... nothing, no use for it at all. I need to go break something so I can fix it.I know what you mean. Sometimes I will wander around just looking for possible reasons to use my multitools :D It's funny too, because I have fixed things and taken care of things that I may otherwise not have bothered with had I not become addicted to multitools.
-
My Vic. Handyman got a fair bit of use today - Hacksaw , pen blade , and cap lifter .
Chris
-
Yesterday I tightened ever door hinge screw upstairs with a bit inserted into my Leatherman Crunch. Today I had to work on my Davis weather station and a plant hanger next to it nearly pokes my eye out when I get near it so I used a flat driver bit in my Skeletool to remove the offending plant hanger till spring.
Had a Wingman in my pocket too just in case.
Oh well, maybe something bigger will break tomorrow!
Tony
-
Used the large Phillips bit on my Balance to tighten the head on my snow shovel, and the blade to open a bag of ice melt. Sure need both here today!
-
@jerseydevil said:
Used the large Phillips bit on my Balance to tighten the head on my snow shovel, and the blade to open a bag of ice melt. Sure need both here today!I see a connection here
@jerseydevil said:
Nope.Rock salt or calcium chloride for ice melting?


-
:D Yep, they're calling for 4-6" today. My answer to that question by the way is calcium chloride - it doesn't destroy the cement steps and walkways like salt does.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login