Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

Sog pocket power pliers owners club,

Scheduled Pinned Locked Moved SOG Tool Forum
180 Posts 1 Posters 62.7k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • ZedZ
    ZedZ
    Zed
    wrote on last edited by
    #20

    @theonew said:
    So far so good with the PPP, there are some definite design flaws but for me I can see this tool working out quite well. The compound leverage did seem to increase the force that could be applied but I couldn't really tell by how much. All the hard wire I have available was able to be cut by both the Charge TTI and Vic Spirit. So I had to move the goal posts a bit. I searched through the odds and ends bin of nails and screws and found a hard nail that I couldn't cut with both the Spirit and the Charge using one hand only. Then I tried the PPP (with a bandana wrapped around the handles ::)) and was able to cut it one handed with even a bit of strength left to spare. Nice and with no damage to the cutters :tu: I'm a believer now 😄

    :tu: there pretty good arnt they 😄 i was very impressed last week cutting SS rings with ease :tu: yeah the gears are a little bit of a pain while using the driver but im tough 😄

    1 Reply Last reply
    0
    • theonewT
      theonewT
      theonew
      wrote on last edited by
      #21

      Yep, I gotta say, this is my first SOG product of any kind and I'm pleasantly surprised. The only real what-the-smurf moment I've had with it was using the "can opener". Seriously it wasn't just blunt there was 1/32 of an inch of visible flat edge on it :facepalm: I put a quick edge on it with a DMT extra-extra coarse hone and was actually able to fully open a can. It still needs another 5 - 10 minutes of sharpening for it to become truly useful.

      I have a saw on order from SOG and was planning to swap the blade for the saw but looking closely as I close the tool, it almost appears that there is enough room to squeeze in a saw and a blade in the same side. Is the possible :think:

      1 Reply Last reply
      0
      • ZedZ
        ZedZ
        Zed
        wrote on last edited by
        #22

        @theonew said:
        Yep, I gotta say, this is my first SOG product of any kind and I'm pleasantly surprised. The only real what-the-smurf moment I've had with it was using the "can opener". Seriously it wasn't just blunt there was 1/32 of an inch of visible flat edge on it :facepalm: I put a quick edge on it with a DMT extra-extra coarse hone and was actually able to fully open a can. It still needs another 5 - 10 minutes of sharpening for it to become truly useful.

        I have a saw on order from SOG and was planning to swap the blade for the saw but looking closely as I close the tool, it almost appears that there is enough room to squeeze in a saw and a blade in the same side. Is the possible :think:

        Ive got the saw instead of a blade and i dont think it is possible, i might give it a go though but i think it will be too tight for the pliers to go in :think:

        1 Reply Last reply
        0
        • theonewT
          theonewT
          theonew
          wrote on last edited by
          #23

          How does the saw work for you? Looking at the pics it looks quite well designed.

          1 Reply Last reply
          0
          • ZedZ
            ZedZ
            Zed
            wrote on last edited by
            #24

            @theonew said:
            How does the saw work for you? Looking at the pics it looks quite well designed.

            The woodsaw works really well,as good as LM's i also add the bit adapter to the large driver to add more driver options, :tu:

            1 Reply Last reply
            0
            • theonewT
              theonewT
              theonew
              wrote on last edited by
              #25

              Well I received a saw for the PPP this weekend. I put it in next to the blade and found I could only close the tool by pressing the saw over just slightly while folding it. This was an unacceptable comprise for me. But then I got to thinking that if I swapped the positions of the saw and blade (saw being the outermost tool) then the taper of the knife tip might allow the pliers head to clear. I tried this and it does basically work. If you look closely as you fold it you can see the pliers head just clear the tip of the knife and then push it out of the way very slightly. It may scratch the tip of the knife blade over time but shouldn't dull or blunt it. If SOG would just make the handle a little bit thicker it would easily accommodate two long tools per side.

              1 Reply Last reply
              0
              • ZedZ
                ZedZ
                Zed
                wrote on last edited by
                #26

                @theonew said:
                Well I received a saw for the PPP this weekend. I put it in next to the blade and found I could only close the tool by pressing the saw over just slightly while folding it. This was an unacceptable comprise for me. But then I got to thinking that if I swapped the positions of the saw and blade (saw being the outermost tool) then the taper of the knife tip might allow the pliers head to clear. I tried this and it does basically work. If you look closely as you fold it you can see the pliers head just clear the tip of the knife and then push it out of the way very slightly. It may scratch the tip of the knife blade over time but shouldn't dull or blunt it. If SOG would just make the handle a little bit thicker it would easily accommodate two long tools per side.

                I will give this a try later but i did line up the blade in this way and it looks very tight and possibly scratch the blade and pliers, ill give it a go later but i agree i wish sog made a slightly wider version of this tool as i like its size and i woudltn mind it a little wider if i could fit a couple more tools, the paratool is like this in the way i could fit the v-cutter and wood was but the pliers stuck up out of the handles 😕 that bugged me 😄

                1 Reply Last reply
                0
                • Jamie_MJ
                  Jamie_MJ
                  Jamie_M
                  wrote on last edited by
                  #27

                  Just received mine this morning, switched out the blade for a saw.

                  SOG1.JPG

                  SOG2.JPG

                  1 Reply Last reply
                  0
                  • parnassP
                    parnassP
                    parnass
                    wrote on last edited by
                    #28

                    I bought a used SOG S45 Deluxe Pocket Power Pliers some time ago. Got rid of the Robertson driver and swapped out the half serrated blade knife for a full straight edge blade.

                    Recently, I transplanted the individual bits from the S-45 into a Paladin Powerplay PT-510 frame and kept the PT-510 pliers head.

                    Wish SOG would upgrade the PPP with blade locks.

                    1 Reply Last reply
                    0
                    • SantosS
                      SantosS
                      Santos
                      wrote on last edited by
                      #29

                      Finally bought a PPP. Been wanting one for years, they just don't seem to come up second hand ond ebay at all. Also put several wanted adds on this forum but no bites. Considering the quantity of gerbers and leathermans that go by i still wonder whether its simply unpopular or no one is willing to part with theirs!

                      Anyone have a fixed solution for the hurty handles?

                      My first true multitool purchase was a powerlock which i always ytake for the rough heavy duty task.. and the PPP truly seems like the ideal size for daily carry. If only it had handle covers (or simplier external opening tools like a swisstool) and locking tools. Its why i carry a leatherman blast... don't particularly care for the leathermans but it has the right size/implement/function for worldy use

                      -Hey i've been gone for about 120 days so my first post should be a 120 day grave dig right?

                      1 Reply Last reply
                      0
                      • gafftapegreeniaG
                        gafftapegreeniaG
                        gafftapegreenia
                        wrote on last edited by
                        #30

                        I EDC a PPP, this is the club for me!

                        I took out my can opener after shearing off the screwdrive tip and put a Robertson in its place. I also took out the combo blade in favor of a fully serrated blade. While the implements do leave a bit to be desired, the compound leverage is just too dang good.

                        C'mon, SOG, make a PPP with gear covers and locking tools.

                        1 Reply Last reply
                        0
                        • ZedZ
                          ZedZ
                          Zed
                          wrote on last edited by Zed
                          #31

                          @gafftapegreenia said:
                          I EDC a PPP, this is the club for me!

                          I took out my can opener after shearing off the screwdrive tip and put a Robertson in its place. I also took out the combo blade in favor of a fully serrated blade. While the implements do leave a bit to be desired, the compound leverage is just too dang good.

                          C'mon, SOG, make a PPP with gear covers and locking tools.

                          Im with you on the gear covers :tu: i also wish sog would do a update or another similar mt like the ppp but with wider handles so you can have large tools both sides of the handles,more like a mini power pliers :tu: but iam a fan of the ppp and ive replaced the blade/serrated for a wood saw and put scissors in place of the file (not sog scissors) combined with my opie #5 this set up works well for me :tu:

                          1 Reply Last reply
                          0
                          • SantosS
                            SantosS
                            Santos
                            wrote on last edited by
                            #32

                            i got sog scissors for my powerlock... :facepalm: never bothered using once i finally installed it properly and tested it out.

                            What makes the PPP so good is its size/weight wider handles for extra tools may effect this?

                            1 Reply Last reply
                            0
                            • ZedZ
                              ZedZ
                              Zed
                              wrote on last edited by
                              #33

                              @Santos said:
                              i got sog scissors for my powerlock... :facepalm: never bothered using once i finally installed it properly and tested it out.

                              What makes the PPP so good is its size/weight wider handles for extra tools may effect this?

                              I know what you mean but just a little more for one more larger tool ::) 😄 ive got the sog scissors on my powerlock and find them ok they dont lock up as well as the other tools and sometimes i have to puch the lock in but the scissors work on on mine :tu:

                              1 Reply Last reply
                              0
                              • SantosS
                                SantosS
                                Santos
                                wrote on last edited by
                                #34

                                @Zed said:

                                @Santos said:

                                i got sog scissors for my powerlock... :facepalm: never bothered using once i finally installed it properly and tested it out.

                                What makes the PPP so good is its size/weight wider handles for extra tools may effect this?

                                I know what you mean but just a little more for one more larger tool ::) 😄 ive got the sog scissors on my powerlock and find them ok they dont lock up as well as the other tools and sometimes i have to puch the lock in but the scissors work on on mine :tu:

                                If i look at my blast it is considerably bulkier and heavier than my PPP. I think if you add width you need to thicken the metal to strengthern the overall structure ro withstand the external twisty-torque-something-technical-sounding-but-the wording eludes-me

                                As for my powerlock scissor oh they work, just not as well as any other scissors i've come across in various brand pocket knives or plier based multitools.

                                Its ok cause SOG has compound leverage and damn that makes a difference. The replacable implents also nice. You can find you ultimate personal combination. and abuse them with the knowledge that if they do break then so what?

                                1 Reply Last reply
                                0
                                • ZedZ
                                  ZedZ
                                  Zed
                                  wrote on last edited by
                                  #35

                                  @Santos said:

                                  @Zed said:

                                  @Santos said:

                                  i got sog scissors for my powerlock... :facepalm: never bothered using once i finally installed it properly and tested it out.

                                  What makes the PPP so good is its size/weight wider handles for extra tools may effect this?

                                  I know what you mean but just a little more for one more larger tool ::) 😄 ive got the sog scissors on my powerlock and find them ok they dont lock up as well as the other tools and sometimes i have to puch the lock in but the scissors work on on mine :tu:

                                  If i look at my blast it is considerably bulkier and heavier than my PPP. I think if you add width you need to thicken the metal to strengthern the overall structure ro withstand the external twisty-torque-something-technical-sounding-but-the wording eludes-me

                                  As for my powerlock scissor oh they work, just not as well as any other scissors i've come across in various brand pocket knives or plier based multitools.

                                  Its ok cause SOG has compound leverage and damn that makes a difference. The replacable implents also nice. You can find you ultimate personal combination. and abuse them with the knowledge that if they do break then so what?

                                  :tu: i have too say its the pocket ability i love about the ppp, still one of my favourite MT's and i think its because i use it so much :salute:

                                  1 Reply Last reply
                                  0
                                  • T
                                    T
                                    thesuper
                                    wrote on last edited by
                                    #36

                                    im in! got mine about a week ago, really likeing it so far

                                    1 Reply Last reply
                                    0
                                    • trouthunterT
                                      trouthunterT
                                      trouthunter
                                      wrote on last edited by
                                      #37

                                      Had this in the tool bag for way too long. Forgot I had it.

                                      1 Reply Last reply
                                      0
                                      • AHBA
                                        AHBA
                                        AHB
                                        Admin Team
                                        wrote on last edited by
                                        #38

                                        @trouthunter said:
                                        Had this in the tool bag for way too long. Forgot I had it.

                                        I got one of those too. Not that's what I call a rebrand.. :salute:

                                        1 Reply Last reply
                                        0
                                        • nuphoriaN
                                          nuphoriaN
                                          nuphoria
                                          Admin Team
                                          wrote on last edited by
                                          #39

                                          It is essentially the same as the SOG?

                                          1 Reply Last reply
                                          0

                                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                          With your input, this post could be even better 💗

                                          Register Login

                                          • Login

                                          • Don't have an account? Register

                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Popular
                                          • World