Michael Vagnino Zipslip
-
Oh .... for those who it may concern, due to the ball bearing pivot, heavy blade and moderate backspring - this knife does NOT pass the Aussie Customs Test (grip tightly flail your arms around like a lunatic to try and get the blade to come out), which I believe also applies on the streets of some cities in the US

It's possible it may just be my knife and the next one may be more (or less I suppose) retentive, and you do have to really try to get the blade out that way on this one, but it is possible so I thought I'd best raise it for those with the relevant restrictions

-
@50ft-trad said:
That's looovely mate.
Looking forward to seeing that one at some point. 
Thanks Gareth

I suspect my Byrd Tern might not be my favourite slippy for much longer :P :D :D :D
You mentioned that you'd used your Edgie for something earlier and I have to admit I'd not given mine a second thought in a long time. :-[ I suspect you might have a similar bought of amnesia now you've got this in your sweaty mitts. :D
-
@50ft-trad said:
Oh .... for those who it may concern, due to the ball bearing pivot, heavy blade and moderate backspring - this knife does NOT pass the Aussie Customs Test (grip tightly flail your arms around like a lunatic to try and get the blade to come out), which I believe also applies on the streets of some cities in the US
It's possible it may just be my knife and the next one may be more (or less I suppose) retentive, and you do have to really try to get the blade out that way on this one, but it is possible so I thought I'd best raise it for those with the relevant restrictions

I recall that Flash had an issue importing a UKPK to the UK. Stopped at customs as a 'gravity' knife.
Happily the wording in the description of a gravity knife very specifically states that it 'locks' open, so Flash was able to successfully argue that the UKPK couldn't fall into that description. -
@50ft-trad said:
Oh .... for those who it may concern, due to the ball bearing pivot, heavy blade and moderate backspring - this knife does NOT pass the Aussie Customs Test (grip tightly flail your arms around like a lunatic to try and get the blade to come out), which I believe also applies on the streets of some cities in the US

It's possible it may just be my knife and the next one may be more (or less I suppose) retentive, and you do have to really try to get the blade out that way on this one, but it is possible so I thought I'd best raise it for those with the relevant restrictions

I recall that Flash had an issue importing a UKPK to the UK. Stopped at customs as a 'gravity' knife.
Happily the wording in the description of a gravity knife very specifically states that it 'locks' open, so Flash was able to successfully argue that the UKPK couldn't fall into that description.That's an interesting piece of clarification :D Thanks mate

Obviously that may or may not apply to those of you who are bound by different laws

-
@50ft-trad said:
@50ft-trad said:
Oh .... for those who it may concern, due to the ball bearing pivot, heavy blade and moderate backspring - this knife does NOT pass the Aussie Customs Test (grip tightly flail your arms around like a lunatic to try and get the blade to come out), which I believe also applies on the streets of some cities in the US

It's possible it may just be my knife and the next one may be more (or less I suppose) retentive, and you do have to really try to get the blade out that way on this one, but it is possible so I thought I'd best raise it for those with the relevant restrictions

I recall that Flash had an issue importing a UKPK to the UK. Stopped at customs as a 'gravity' knife.
Happily the wording in the description of a gravity knife very specifically states that it 'locks' open, so Flash was able to successfully argue that the UKPK couldn't fall into that description.That's an interesting piece of clarification :D Thanks mate

**Obviously that may or may not apply to those of you who are bound by different laws **

Yes, indeed.
From Restriction of Offensive Weapons Act 1959
"b)any knife which has a blade which is released from the handle or sheath thereof by the force of gravity or the application of centrifugal force and which, when released,* is locked** in place by means of a button, spring, lever, or other device, sometimes known as a “gravity knife”,"*As Al says though, this is a UK Law only and it's always makes sense in checking your local definitions. :)
-
Now that, I like

-
Very nice choice.
Do you something custom made, or is that one of his current standard offerings?
-
From Restriction of Offensive Weapons Act 1959
"b)any knife which has a blade which is released from the handle or sheath thereof by the force of gravity or the application of centrifugal force and which, when released,* is locked** in place by means of a button, spring, lever, or other device, sometimes known as a “gravity knife”,"*As Al says though, this is a UK Law only and it's always makes sense in checking your local definitions. :)
Thanks mate

Now stop pissing on my "I'm really happy with my sexy new knife thread", with all your doom and gloom and litigation

:D :D :D
... but back on the topic of the Edgie ... :D ... I only grabbed that this morning as I went for the Byrd Tern automatically and stopped myself to intentionally carry something that hadn't seen the light of day for a while. Ironically I think I might just be carrying it or something similar for a while yet. I don't think I'm ready to subject my new one to all the gunge, grime and chemicals of the workplace just yet :ahhh :ahhh :ahhh
@nuphoria said:
Very nice choice.Do you something custom made, or is that one of his current standard offerings?
Thanks guys

Chrissy, it was actually off the shelf - tucked away in the custom knife section at Heinnies :D No more orange, but there might be another colour
There's some odd clip blade style ones too ... and I think in the Tom Ferry section there's a UK legal Carbon Fibre one, but not sure if that's the same mechanism without checking -
That certainly is
. Very nice Al! 
-
Thanks Tom

I was actually comparing this knife with an original (Black G10) UKPK last night, specifically in terms of blade size/thickness and overall appearance. The Zipslip is about the same size as regards edge length, but looks a lot more "civilian" in my mind (less scary for the non-knife person).
I need to test the "acceptability" of this amongst NKPs somehow to see if it get's the "oh that's a nice pocket knife" response, or the "OMG run away, run away" response >:D I also need to make the test won't get it confiscated :ahhh :ahhh :ahhh
Also ...
I know D2 is classed as an "almost" stainless steel having 11.5-12.0Cr dependent on the manufacturer .... but how much do I need to pamper this blade so I don't wreck it? Will it corrode as badly as say 1075 if I don't mother it? I bought this to use it, and don't want to have to be too cautious, but don't want to wreck it in 18 months either :ahhh :ahhh If anyone has long term experience with D2 as a folder I'd be interested to hear

Oh ... and I've got my Edgie in my pocket again at work today :D
-
You will want to protect that D2, as it will rust and tarnish. I guess if you are into the patina thing, then you needn't bother, but that is a personal preference. ;)
I use mineral oil or a food safe stainless steel cleaner (that is mineral oil based) so I don't have to worry about ingesting more toxins than I already do.
And that is a sharp looking knife, congratulations!
Dave
Sent from my iPad2
-
Thanks Dave
Would it pick up a patina from cutting apples or whatever for a bit of added protection before I start with the mineral oil, or is the oxidation a much longer term thing? -
On D2, all I can say I've got a Canal Street Cannitler in D2 and keep it very lightly oiled and have had no hint of any of any problems. I don't think D2 needs to be as coddled as stuff like 1075 or 1095 in our climate but it is worth checking more regularly than a stainless blade proper if you going to store a D2 knife for a while. I've also come across complaints that D2 doesn't take a patina easily but I can't verify this from experience.
-
I had my Kershaw Junkyard Dog with composite blade (CPM-D2 insert) stain from cutting an orange. I disliked the resulting uneven look, so I heated up some vinegar and darkened the entire insert. Now I protect it.
D2 certainly isn't as delicate as a carbon steel, but it will stain. And given encouragement, it will rust. Some people like that kind of thing. They think it gives a knife character or some such thing. I believe that it shows how poorly it has been looked after. As a Canadian in southern Ontario, I see enough rust on our cars, and that isn't the kind of "character" one wants in a vehicle. I certainly don't want my knives rusty. :)
Dave
Sent from my iPad2
-
@kitbeard said:
On D2, all I can say I've got a Canal Street Cannitler in D2 and keep it very lightly oiled and have had no hint of any of any problems. I don't think D2 needs to be as coddled as stuff like 1075 or 1095 in our climate but it is worth checking more regularly than a stainless blade proper if you going to store a D2 knife for a while. I've also come across complaints that D2 doesn't take a patina easily but I can't verify this from experience.Thanks mate

@16VGTIDave said:
I had my Kershaw Junkyard Dog with composite blade (CPM-D2 insert) stain from cutting an orange. I disliked the resulting uneven look, so I heated up some vinegar and darkened the entire insert. Now I protect it.D2 certainly isn't as delicate as a carbon steel, but it will stain. And given encouragement, it will rust. Some people like that kind of thing. They think it gives a knife character or some such thing. I believe that it shows how poorly it has been looked after. As a Canadian in southern Ontario, I see enough rust on our cars, and that isn't the kind of "character" one wants in a vehicle. I certainly don't want my knives rusty. :)
Dave
Sent from my iPad2
Cheers mate :D I don't want my knives looking like they've just been recovered from the bottom of the sea :ahhh but don't mind my knives (and other tools) looking like they work for a living :D Darkening and staining are perfectly fine in my book, it's the brown furry stuff I don't want :ahhh Based on your experience with the orange, but Kitbeard's comments that it doesn't take a patina easily, I'm guess the sort of patina I'd expect will happen over a few months rather than overnight ;)
I'll stop by a pharmacy tonight too and see if they've got some liquid parafin (which is what I believe your mineral oil is over here)

-
Is it?? Oh... I hadn't worked that out

-
Apparently so, but the local pharmacy hasn't got any :-\ It seems that if it doesn't come in pill format with excess packaging, a pseudo-latin name and a picture of a fresh happy smiling turd surrounded by mythical flying creatures it isn't worth selling.
Off to Boots to see if they've got any tucked away in and amongst their garishly packaged synthetic panaceas

-
... and Boots no longer sell it as it's no longer "recommended" as a laxative. I'm pretty sure it's still available online though ;)
-
@50ft-trad said:
Oh .... for those who it may concern, due to the ball bearing pivot, heavy blade and moderate backspring - this knife does NOT pass the Aussie Customs Test (grip tightly flail your arms around like a lunatic to try and get the blade to come out), which I believe also applies on the streets of some cities in the US

It's possible it may just be my knife and the next one may be more (or less I suppose) retentive, and you do have to really try to get the blade out that way on this one, but it is possible so I thought I'd best raise it for those with the relevant restrictions

I recall that Flash had an issue importing a UKPK to the UK. Stopped at customs as a 'gravity' knife.
Happily the wording in the description of a gravity knife very specifically states that it 'locks' open, so Flash was able to successfully argue that the UKPK couldn't fall into that description.OK it sounds like Oz Customs maybe got their 'Flick knife' test which they refer to a blade being deployed under centrifugal force, from UK Customs
, I had wondered if it was a product of some stupid Aussie pen pusher
, it also explains why Oz customs seems to only be concerned,at this stage ::) , in locking knives
. Looks like Oz customs has substituted 'gravity knife' for 'flick knife' & use the same crazy wrist flick action of deployment

BTW Al very nice knife mate 8) 8)
, keen to hear how it holds up , edge retention,cutting,ease of use etc

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

