And so it begins.... (My adventures into Alox!)
-
@nuphoria said:
Nothing should be sacred really >:DI asked somewhere else, but I'll throw it in the mix here - can a 84mm nailfile be used in a 93mm mod?
Yes if I use one of the custom springs I made. I can leave the one end thicker than normal so it sits up higher. I tried it with an 84mm combo and it worked, so a nail file should as well.
-
Oh dear, I was worried you might say that >:D
-
Is that Kamm's or Rick's? Why the combo opposite the phillips instaid of the opener layer? :ahhh I'm confused.

-
-
@Syph007 said:
I've been thinking of trying that opener trick on a standard 91mm but never got around to it yet. Go for it!I'm back to killing limited editions again. People want them modified, who am I to say no.
Orange sailor #24 is currently in pieces. It will end up as a 4 layer.
Marlin spike / blade
Pliers
Scissors
Phillips / combo
sounds good!
are you going to add a keyring to that new marlin spike one?
i think all marlin spike knives should have one...
-
Looking good sir.
Why add the keyring? I've always thought they just get in the way.
-
i guess i equate marlin spike with boat knife which should have lanyard...
I agree that a knife without one is more comfortable
-
Think of it as making the limited edition an exclusive edition.
:P
-
Just my personal .02 cents -- I think modding these limited editions is a great thing due to the fact that you're getting exactly what you want in the end without waiting a million years for Vic to manufacture it

That, and I enjoy all the photos of the parts to finished products :D
Thank you to Syph and the other modders for all your great works

-
@sawman said:
Just my personal .02 cents -- I think modding these limited editions is a great thing due to the fact that you're getting exactly what you want in the end without waiting a million years for Vic to manufacture it
That, and I enjoy all the photos of the parts to finished products :D
Thank you to Syph and the other modders for all your great works

i agree with everything you said. life's too short to not have exactly what you want in your pocket!

mod on!
-
@sawman said:
Just my personal .02 cents -- I think modding these limited editions is a great thing due to the fact that you're getting exactly what you want in the end without waiting a million years for Vic to manufacture it
That, and I enjoy all the photos of the parts to finished products :D
Thank you to Syph and the other modders for all your great works

I also agree, modding limited edtitions and or rare models, makes the surviving ones even more limited or rare :D
-
I was just finishing up this sailor custom and since people seemed interested in assembly pics I tools a bunch during the test fit up.
This is typically how I build them. Lay the parts out from back to front and then assemble as I go. There are actually 38 separate parts in this mod, each and every single one has had work done to it, not one stock part in the lot. From tool pivot drilling, edge buffing, part reshaping, screw polishing, pivot cutting, drill and counter sinking scales and custom washer making.










-
I really love these pictorial posts. It's like watching an episode of "How It's Made".
-
And here are the finished glamor shots. :D
For whatever reason its always hard to photograph the backsprings, I moved the SAK all over and finally a wood background was acceptable.








-
Nice. Are your pivots one solid length or two smaller pieces joined together?
-
@Corso said:
Nice. Are your pivots one solid length or two smaller pieces joined together?For this one since it's wider than a standard pivot is long, I make the pivots longer by using a very long screw on one side that goes through a short piece of pivot, and then into the longer piece of pivot. I sand down the junction and also put it in the center of the largest spring, in this case the pliers.
-
That's a huge beast. :tool:
-
Great stuff Syph. To be proud of

Small question: is 4 layer alox same thickness as 3 layer celidor?
-
Very nice job!! JR
-
Heeeyyyyy Sexy layday!
Nice!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login