What's on your keychain?
-
Guys, is a Widgy pry bar as useful as a knife edge? I know it's there to replace your blades, which end up broken, but if it does not taper to a thin edge, I can see most of the applications I need unfulfilled. I may just stick with the beater blade on my Sheffield multi.
-
@scorpion008 said:
Guys, is a Widgy pry bar as useful as a knife edge? I know it's there to replace your blades, which end up broken, but if it does not taper to a thin edge, I can see most of the applications I need unfulfilled. I may just stick with the beater blade on my Sheffield multi.I must agree with you. Most part of my very ocasional prying necessities can not be done using a pry bar. I've made a very thin one and the only thing I'm able to use it for is to remove staples, it is just too thick for the rest.
-
Been giving the Leatherman Brewzer some time with keychain duty, swapping it out with the Gerber Shard, and I like it so far... 8)

-
It is a rather useful little thing :)
I like the lovely scarf you made for it too

-
@nuphoria said:
It is a rather useful little thing :)I like the lovely scarf you made for it too

Keeps its neck warm on those chilly January mornings. :P Although, it seems Old Man Winter hasn't showed up for work this season, with temps 'round these parts looking to be in the 70's this weekend... :ahhh :o
-
Also been giving the Brewzer a go for a few days. It's so small I haven't felt the need to remove my Micro Widgy, which the Brewzer may replace if it's deemed worthy (a difficult feat indeed -- love the Widgy)!
Not on my keychain (but always with me): EDC knife, flashlight, and multitool.

-
It is a rather useful little thing :)
I like the lovely scarf you made for it too

Keeps its neck warm on those chilly January mornings. :P Although, it seems Old Man Winter hasn't showed up for work this season, with temps 'round these parts looking to be in the 70's this weekend... :ahhh :o
70's?? Crikey o'blimey!
Was a big fat zero here this morning! :ahhh
-
It is a rather useful little thing :)
I like the lovely scarf you made for it too

Keeps its neck warm on those chilly January mornings. :P Although, it seems Old Man Winter hasn't showed up for work this season, with temps 'round these parts looking to be in the 70's this weekend... :ahhh :o
70's?? Crikey o'blimey!
Was a big fat zero here this morning! :ahhh
I'd love for a zero-degree day here. It's so cold, so very cold...
-
Here's today's:

-
Interesting that you have two TTs on the same ring
I know they're two different tools but, what's your reasoning? Just curious, that's all 
-
@stealth007s said:
Interesting that you have two TTs on the same ring
I know they're two different tools but, what's your reasoning? Just curious, that's all 
No problema. I need one with a bottle opener!

-
my keychain doesn't have the micra on it currently. thinking about putting on a ps4 in blue instead...but i like the inside tools of the micra......decisions...
anyway....
i bought a brewzer by leahterman.
idk why.

-
I've been carrying my smoke PocketToolX Brewzer for several months now and I really love it. A ton of options in such a small package.
I might have to add a Leatherman branded tool for a backup. :D -
Would you guys say that you prefer the Brewzer to the Widgy?
-
@scorpion008 said:
Would you guys say that you prefer the Brewzer to the Widgy?IMHO: Pocket Widgy is a better prybar because of the length, Brewzer is a little more comfortable opening bottles with. (As you have to use the good old "everything is a bottle opener" technique with a Widgy.) I like both. Frankly, I can go through most days with just a knife and a P-51, a P-51 opens bottles just fine too.
-
One last question...for now.
For those that have both (Widgy and Brewzer), which has a better, thinner edge for prying into narrow cracks? I like working with/demolishing electronics so this is one of the uses for any prybar I get. Also, is the boxcutter on the Brewzer equalled by any part of the Widgy bar? <-Second most useful function. -
@scorpion008 said:
For those that have both (Widgy and Brewzer), which has a better, thinner edge for prying into narrow cracks? I like working with/demolishing electronics so this is one of the uses for any prybar I get. Also, is the boxcutter on the Brewzer equalled by any part of the Widgy bar? <-Second most useful function.Good question. The pry edge on the Brewzer is slightly thinner at its peak, compared to that of the Widgy. However, the Brewzer is, overall, thicker. I own the Micro Widgy (3") and it is longer than the Brewzer by about a half inch. This length, along with the curved end make the Micro Widgy feel better suited for dedicated prying tasks. Keep in mind that the Widgy is hardened and the edge could be thinned even more (and further back than in its current form) with relative ease, should you need a more slender taper at the pry end.
The box "ripper" at the end works as advertised and pops tape just a hair easier than the Widgy, but I don't find it to be significantly better. Again, the length comes into play here: I find it easier to get a good grip on the 3" Widgy than I do the 2.5" Brewzer, which aids in leverage when busting the tape on a box. The forked end of the Widgy serves just about the same purpose, when you turn it on its side in the same fashion as the Brewzer.
Lastly, one thing I should mention that I never gave any thought to until I owned one myself: I find the location of the bottle opener on the Brewzer to be slightly inconvenient in regards to repeated use of the box ripper. Just when my thumb rests on the jimping to drive the tip through a box, my index finger lands in the crook of the bottle opener and that little hook digs in a bit. It's not unbearable, but I would not want to break down a large supply of boxes using the Brewzer alone. In fact, I don't -- I use a knife. The Brewzer will work in a pinch or for the occasional box just fine, however.
Should you elect to use the 2" Pico Widgy, I'd say all bets are likely off and the Brewzer may very well come out ahead. Against the 3" Widgy, it's a bit of a harder sell. To me, it really comes down to size, convenience, and how often you're gonna be opening beverages.
I like the Brewzer and it's a cool little pry bar that works well and does what it should. But compared to my Micro Widgy, I find it comes up a bit short in the prying department. Hope this helps a bit!
-
The Brewzer's tip is a little think for my liking, so I have thinned it down a bit using a scotchbrite wheel on a bench grinder and it worked like a charm.
I didn't profile it on my smoke Brewzer because it's kind of rare.The great thing about the Brewzer is it does so much and for its size and weighs next to nothing and the price is right. I've had hundreds if not thousands of pocket tools and I've yet to find anything close as far as overall use. I don't use a bottle opener very often but it's nice to know it's there when I need one.
Anyone notice any difference at all with the Leatherman branded tool?
-
Here's the "hot spot" I was referring to earlier:


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login