What Did You Use Your Multitool For Today?
-
Olive oil is fine as long as it is not kept for too long. As a honing oil it is fine, since you clean it afterwards.
For any long term lubrication use it is not good as it begins to smell bad going rancid and congeals, attracting dust. It is also not good with extreme heat or cold.
It can be used as an emergency lubricant if needed, though ;) ...
Note that the olive oil here is pretty strong, that is not very filtered and purified, having a really good taste.
Maybe the really purified, industrial made one is better for oiling.
-
I think the upside to using a petroleum-based oil might be that its more resistant to food-borne pathogens than vegetable or animal oils. I dunno, I use Jigaloo on my tools.
-
I now use 3 in 1 for lube needs when I'm at home (I'm not going to put it in my EDC pack due to the mess risk) but I'll stick with the EVOO when I need it ICOE and for honing.

-
I used the pliers of my Charge TTi to loosen the bolt that was holding the spare donut tire in the trunk of my car. I had to rub that one in the wife's face because she doesn't see much use for my multis and SAKs ::) If I hadn't had that on me, I would have had to go back inside to hunt for something else to use.
-
I use the hook on my Charge to roll up the rim on my Tim Horton's cups.
-
Took apart more computers. It's becoming the running theme for my Spirit.
I did notice last night the blade isn't quite up to Vic's usual sharpness standards. It is now :)
-
@thebullfrog said:
Took apart more computers. It's becoming the running theme for my Spirit.I did notice last night the blade isn't quite up to Vic's usual sharpness standards. It is now :)
Do you have the Spirit X or the regular? Just wondering if you had the regular, how you sharpened the blade.
-
X. I used to have an S, and I would use the corners of my Sharpmaker rods to sharpen the butter blade. Didn't work great but was a serviceable solution.
-
@thebullfrog said:
X. I used to have an S, and I would use the corners of my Sharpmaker rods to sharpen the butter blade. Didn't work great but was a serviceable solution.I wish I had been able to get an S model. I have the regular model with the butter blade. I bought the Smith's pocket sharpener that has the tapered diamond grit rod, but that looks like it would be a little rough. I had based my choice around having scissors, but that was before I got bitten by the SAK bug. Now I have scissors covered by one of those, and don't have to have them on my multitool. I prefer the scissors on an SAK over the Spirit's anyway, plus I can just pull out the SAK for a quick snip if needed instead of pulling out a multitool for that quick task.
-
X. I used to have an S, and I would use the corners of my Sharpmaker rods to sharpen the butter blade. Didn't work great but was a serviceable solution.
I wish I had been able to get an S model. I have the regular model with the butter blade. I bought the Smith's pocket sharpener that has the tapered diamond grit rod, but that looks like it would be a little rough. I had based my choice around having scissors, but that was before I got bitten by the SAK bug. Now I have scissors covered by one of those, and don't have to have them on my multitool. I prefer the scissors on an SAK over the Spirit's anyway, plus I can just pull out the SAK for a quick snip if needed instead of pulling out a multitool for that quick task.
91mm SAK scissors really are the best option for EDC scissors.

Don't fret though, even though they have a small bite, the Spirit scissors are pretty good too.
-
X. I used to have an S, and I would use the corners of my Sharpmaker rods to sharpen the butter blade. Didn't work great but was a serviceable solution.
I wish I had been able to get an S model. I have the regular model with the butter blade. I bought the Smith's pocket sharpener that has the tapered diamond grit rod, but that looks like it would be a little rough. I had based my choice around having scissors, but that was before I got bitten by the SAK bug. Now I have scissors covered by one of those, and don't have to have them on my multitool. I prefer the scissors on an SAK over the Spirit's anyway, plus I can just pull out the SAK for a quick snip if needed instead of pulling out a multitool for that quick task.
91mm SAK scissors really are the best option for EDC scissors.

Don't fret though, even though they have a small bite, the Spirit scissors are pretty good too.
Yes, I agree with that statement. They really are excellent scissors. Oh yes, the Spirit's scissors are nice too, and are great for snipping threads and things of that nature, but they don't have much of a mouth on them.
-
Yea they are a bit small. I keep a micra around my EDC rotation because they are awesome for cutting zip ties and thicker stuff, but 99% of my needs are satisfied by SAK scissors.
-
I used my SAK Pioneer to open a couple of packages that arrived today. One contained another Juice and one had a Minichamp in it. :)
-
Used the knife on my Juice S2 to cut my ribeye at lunch today
I was going to pull out the Opie No8 but I thought I'd better not as it may scare people
I usually use the S&W HRTF to cut my meat with but I wanted to put the S2 through some task as it's new to me. Worked very well!¡! 
-
My Pirahna likes bottle caps.
-
I used my Juice S2 small screwdriver to poke holes in the drywall and install screws so I could rehang a picture and mount a tip preventer on a new (to me) hall tree that I got today from a friend of mine from the cigar club
I used the MUT hammer to install the anchors for all the above. I'm having trouble with the image attachment thing so I'll post them from Tapatalk later 
-
@sir_mike said:
I used my SAK Pioneer to open a couple of packages that arrived today. One contained another Juice and one had a Minichamp in it. :)Does that make your Pioneer a sort-of "meta-tool" ?
for the curious: http://en.wikipedia.org/wiki/Meta
-
I used my SAK Pioneer to open a couple of packages that arrived today. One contained another Juice and one had a Minichamp in it. :)
Does that make your Pioneer a sort-of "meta-tool" ?
for the curious: http://en.wikipedia.org/wiki/Meta
Heck yeah! :)
-
Used the file on the Juice to smooth off some rough edges on the scale of a Victorinox Huntsman which I got yesterday.
-
I used my Rebar to remove a screw to check on a part of a new (but old) toy I purchased recently. >:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login