Show off your Sak mod's!
-
Real purty, it has the look a hard woking sak. Is it three layer? Electrician blade fit with the saw?
-
three layer yes.
i have the saw in place of the big blade, and yes the electrician blade is in that layer.
i did this mod with a file as big blade too:

i like the longer phillips. I use the phillips alot.
I always have a different blade (mostly utility) on me so SAK blade doesn't see much use.
here is the link
</post/646613>
-
Please keep us updated on the bolts as pins experiment. It will be interesting to see how they hold up under a bit of torque.
Cheers
-
yes i will, this is an experiment for me too before i make any more.
-
Temp's were in the mid-high 30's C range outside this weekend, so I had plenty of time inside with the A/C on to build a couple of knives.
The Aussie Mini-Champ (two bottle openers on flat and Phillips combo tools)
More pic's in The Victorinox-Wenger Horn Handles thread.
... and the Six-shooter Spartan, latest in the Brass Scales series.




-
i like the minichamp :) good job, are those 1/16 pins?
-
the brass rod I have measures up as 1.58mm or 0.620" so it's about 5 thou' under 1/16th.
-
PTR,
I thought ye olde barreled projectile machines were not too allowed anymore way down under. Where did you get the 38 casings?
You naughty boy...
-
Not totally banned, just heavily restricted.
I have about 800 brass and 500 nickel plated 38spl cases left over from my Pistol club days. Somewhere I have a bunch of 44MAG too.
The 9mm and 45ACP brass all went in the bin several years ago.I'm planning on doing several different calibers of these knives, I have a bunch of used Spartans who's tools polish up okay but have dud scales.
I think the gun club boys will like them. Next will be a rifle cartridge, 303-British should be popular.
Also got cases for 45-70 GOVT, 300 WINMAG. 308WIN, 458WIN, 6.5x55 Swedish, 22-250REM and several other randoms that I picked up at the range last week. -
Nice. I am sure the will love them, esp if they have a 1911 and the rifle the Vic driver is spec'd for.
Cheers
-
A different sort of cellidor mod today. A user wanted a two layer mechanic with awl in place of phillips. I used the inner liner as an outer liner for the front side so the pliers rivet did not hit the scale. The awl needed a very tiny washer made for it as well, but it all worked out just fine.



-
That's an interesting take on the Mechanic...like a variant on the Mechanic Jr. It definitely makes getting at the awl much easier; the awl on a stock knife is a real nail breaker for me.
-
I'm new here so - hello everyone :) Greetings from Cracow, Poland!
I have a small problem with my SAK mod... I saw mods from Syph007, and I realy enjoy two openers in one layer with phillips... But, when i tried it, the spring from layer with philips and magnifying glass was to thin for 2 openers. How you solved that problem, 'couse I cannot find it...
And I forgive me my boldness, but I want to share with you my first mod:
Victorinox Ultimate
Assembled from Cybertool 34 and Swisschamp.
I know that philips is doubled, but i couldn't find the way to put two openers in one layer with magnifying glass.I hope you like it.
vol
-
Pretty nice looking mod there, vol7.
-
@Syph007 said:
A different sort of cellidor mod today. A user wanted a two layer mechanic with awl in place of phillips. I used the inner liner as an outer liner for the front side so the pliers rivet did not hit the scale. The awl needed a very tiny washer made for it as well, but it all worked out just fine.


is the washer needed for the proper snap? I've tried putting an awl there like that with no washer and the snap on the blade wasn't right...
-
-
Like your ultimate mod

-
First Alox mod. Explorer+Electrician+Pioneer Solo+Pioneer Harvester+handmade liners=Alox Explorer. (and a pile of leftovers)




-
@vol7 said:
I'm new here so - hello everyone :) Greetings from Cracow, Poland!I have a small problem with my SAK mod... I saw mods from Syph007, and I realy enjoy two openers in one layer with phillips... But, when i tried it, the spring from layer with philips and magnifying glass was to thin for 2 openers. How you solved that problem, 'couse I cannot find it...
Hi welcome! That mod I do with the openers uses two opener springs, that way each opener is sprung independantly, and the phillips needs washers on each side to sit tightly. I have not tried it on a 91mm SAK though, but it should work too, some reshaping might be needed for the springs.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

