Skeletool owners club
-
Here is my first Leatherman, bought it a year or so ago:

Just sent it in as two of the three springs in one of the handles had broke and the blade had about 3/4" of the tip missing. I took the above pic before sending it in. I work at a potash mine, so even though I oil it all the time it rusts like nuts. I have a new Skeletool CX on the way too, it will be my EDC multitool around the house so I don't have to bring my other one home all the time. Love the Skeletool design, everything I need, nothing I don't.
-
potash is an alkali, right? That's gotta be hard on most metal equipment.
-
Hi there,
I've got myself a Skeletool CX Plain Edge for a while now, though it's getting very apparent that the screw that's initially holding the blade is getting rather loosened. Is there any fix to that, that any of you lot know of by any chance? Everytime i tighten the torx screws it's getting awfully loose whilst it's not even /that/ old yet..
Also, i've disassembled it as to clean out all the rubbish as it was making a rather "screeching" noise when i opened the blade. Muck and hardened grime all under it (That's when you know you're using your Multitool well, right? ;-) ). I've written down the parts list though i might have made a mistake.
From bottom to top:
Body
Copper/Brass ring
Blade
Small plastic ring in the middle
Larger plastic ring
Outer ring with the indent to keep it stuck
Torx ScrewIf any of you lot have an assembly guide it'd be much appreciated! I can't seem to get a guide from Leatherman theirselves.
Regards,
P67 -
Welcome to the forum P67. Nice to have you here. When you find the time visit our New members forum and tell us more about yourself so we can give you a proper welcome. :D
As for your Skeletool... an old trick is to put a bit of Loctite on your screw and then screw it in. I think most people use the blue one as it allows for easier removal if needed. As for the screeching sound, you might want to put a bit of oil on the pivot.
-
@Chako said:
A few Skeletool related photos taken this morning.
It's all different skeletool?
The first apparently coated with gold - not released officially.
Second - Rei.com edition.
Third to sixth-Limited Color Edition.
Eighth - CX first versions
Tenth - normal skeletool
Eleven-skeletool first versions
The issue with the seven and nine - they are the same or different? If different, what's the difference. -
A few Skeletool related photos taken this morning.
It's all different skeletool?
The first apparently coated with gold - not released officially.
Second - Rei.com edition.
Third to sixth-Limited Color Edition.
Eighth - CX first versions
Tenth - normal skeletool
Eleven-skeletool first versions
The issue with the seven and nine - they are the same or different? If different, what's the difference.1st gold plated Skeletool from TexasToolCrafters on eBay
2nd red REI edition
3rd, 5th and 6th colors limited edition from about a year and a half ago, first sold only in Europe, I'm not sure if they later sold in the US too.
4th Cabela's 50th Anniversary Skeletool.
7th a factory mistake Skeletool CX labeled as Freestyle CX
8th CX first edition
9th CX new style
10th SS first edition
11th SS new style -
Okay, I am officially a member now as my plain blade Skeletool arrived today in its original box. Just so it does not get lonely I have a gentley used Freestyle on the way too.
Why is it then that I now feel the need for a Skeletool CX too? (Would the Freestyle feel left out if it does not get a CX playmete too like its big brother Skele?)
And yes I also have the twin Style Leathermans, scissors and pliers versions.
So, "Now I am ready"....or so Leatherman tells me. Yet is always seems I am not ready unless I have that next tool with a different compliment of bits/blades.
Tony
-
Many folks see the MUT as the Skeletools big brother. Just saying.

seriously though, congrats on the new MT. I'll be interested to hear which you like more; the Skele or the Freestyle. :)
-
I just had to say how much I'm loving my Skeletool CX. I haven't enjoyed a Leatherman product this much since my Wave. The fit and finish of the Skeletool is really, really nice. Far better than most of my other Leathermans. Nothing rubs. Everything has a nice snap to it. The blade is ground properly.
The only bummer is the lack of a real ball detent. The stamped detent works well, but I wonder if it will become an issue after extended use. Either way, it's far better than the stamped detents I've tried on various Waves and Charges.

-
I have to agree with this last post. I've been through two Skeletool CX, two Waves, one Charge AL and one Style CS and the Skeletools have been head and shoulders over the others when it comes to fit and finish. Have others had this experience as well?
Everything snaps and clicks very tight on my Skeletool and there is no wiggle on anything anywhere. The only complaint I could make is that the pocket clip is easily bent as it catches on to things accidentally.
-
I carried a Skeletool for nigh over a year, because it seemed the most logical balance of weight versus utility. This was generally true until I nearly broke the pliers on it. I then tried a Wave, and then after studying the various models, I upgraded to a Charge TTi as my daily carry. Once I learned how to carry the Charge properly, the weight and bulk was a non-issue.
-
@kinskibrain said:
I have to agree with this last post. I've been through two Skeletool CX, two Waves, one Charge AL and one Style CS and the Skeletools have been head and shoulders over the others when it comes to fit and finish. Have others had this experience as well?Everything snaps and clicks very tight on my Skeletool and there is no wiggle on anything anywhere. The only complaint I could make is that the pocket clip is easily bent as it catches on to things accidentally.
So agree there!
Also Leatherman mounted the pocket clip top heavy instead of keeping the weight on the bottom. With the weight underneath it could firmly hold the clip onto whatever it was attached to. My 2¢ on it anyhow. -
got one too now, cx pe it came in a box and not in plastic shell
-
Skeletool CX mis-labelled as a Freestyle CX

-
Nice.
Not a lot if those around. -
I'm trying to remember the forum member's name who picked both of those mis labelled tools up from the Leatherman factory shop and posted them out to me, and to my shame I can't :(
If I recall, there were quite a few of them as some clown had set a machine up wrong lol. So they sold them off cheap in the shop...
-
Fisting_Chili for $65. :)
-

Skeletool CX PE x 2, Skeletool PE!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login