The Splash - LM Squirt Mod
-
This is going to be fun! :D
-
Nice Eric! I like the name too... :D
You know what, I never liked the micra either, and I thought I was the only one. The p4 is my all time fav keychain tool, I have 3 of them. :D
Ive really been wanting a good way to add serrations to a blade, and I swear I remember seeing a tool to do it on a knife site, but I cant remember what it was. I dont think I could do a good job by hand, so I need to think of a mechanical method or guided way...

-
@Syph007 said:
Nice Eric! I like the name too... :DYou know what, I never liked the micra either, and I thought I was the only one. The p4 is my all time fav keychain tool, I have 3 of them. :D
Ive really been wanting a good way to add serrations to a blade, and I swear I remember seeing a tool to do it on a knife site, but I cant remember what it was. I dont think I could do a good job by hand, so I need to think of a mechanical method or guided way...

I used a dremel. Just slow and steady. I think I am going to try again and use less aggressive serrations but I like the points per inch, almost like a mini saw.
-
Man that SE blade looks MEAN! :D
Are you going to try and do two extra layers for 8 tool slots??
-
@EvilOlivE said:
Man that SE blade looks MEAN! :DAre you going to try and do two extra layers for 8 tool slots??
Yah a total of 4 layers. 2 blade layers and 2 tool layers. I'll see about mixing them up and organizing them so they make sense.
My radio shack e4's came in today with the 3d Phillips, more blades to try to carve a SE on and the tweezer/eyeglass driver layer.
I am going to see if I can manage to only carve up one since they are really good condition.

-
@Metropolicity said:
Yah a total of 4 layers. 2 blade layers and 2 tool layers. I'll see about mixing them up and organizing them so they make sense.My radio shack e4's came in today with the 3d Phillips, more blades to try to carve a SE on and the tweezer/eyeglass driver layer.
I am going to see if I can manage to only carve up one since they are really good condition.
Cool! if IRC the 1/2" long pivots worked out really well with 3 layers, the pivots extended half way into the scale holes almost perfectly. I'm anxious to see how 4 layers works out. The screws that come with the pivots are pretty long so it should at least go together, just hopefully the outside layers wont feel too flimsy with the pivot not reaching all the way to the scale. I guess as long as the pivot extends more than half way into the tool bit it should be all good. It'd be cool to find some 3/4" or 1" long pivots and just cut them to length but 1/2" is the longest i could find.
-
Yah a total of 4 layers. 2 blade layers and 2 tool layers. I'll see about mixing them up and organizing them so they make sense.
My radio shack e4's came in today with the 3d Phillips, more blades to try to carve a SE on and the tweezer/eyeglass driver layer.
I am going to see if I can manage to only carve up one since they are really good condition.
Cool! if IRC the 1/2" long pivots worked out really well with 3 layers, the pivots extended half way into the scale holes almost perfectly. I'm anxious to see how 4 layers works out. The screws that come with the pivots are pretty long so it should at least go together, just hopefully the outside layers wont feel too flimsy with the pivot not reaching all the way to the scale. I guess as long as the pivot extends more than half way into the tool bit it should be all good. It'd be cool to find some 3/4" or 1" long pivots and just cut them to length but 1/2" is the longest i could find.
If I need to splice, I'll splice. But if it's only 2mm or so, I'll trim a spacer.
I plant to replace the scales with precision steel rulers so I'll have enough space :)
-
I'm looking forward too this one 
-
@Metropolicity said:
If I need to splice, I'll splice. But if it's only 2mm or so, I'll trim a spacer.I plant to replace the scales with precision steel rulers so I'll have enough space :)
Oh wow! i didn't catch that, i thought you were going to put the ruler in a tool slot, but you're making scales out of the ruler! too cool

-
If I need to splice, I'll splice. But if it's only 2mm or so, I'll trim a spacer.
I plant to replace the scales with precision steel rulers so I'll have enough space :)
Oh wow! i didn't catch that, i thought you were going to put the ruler in a tool slot, but you're making scales out of the ruler! too cool

Yah! It'll be nice to have a precision ruler, even 2" of it would be useful. It's going to be a testing bed because I plan to use the same technique for my Juice KF4S mod :)
-
Success! I won both the S4's, which have the Ruler/Nail File/Gunk Hook.
All the parts are acquired now...
-
Long after they have made a multi-tool for each person on earth, the collectors and modders will continue to fuel demand...
-
Did some planning today, taking a mental break from Skinth.
From what I gathered this is the load out.
A Layer 1 (outside):
-PE Blade
B Layer 1 (outside):
-3D Phillips/Flat DriverA Layer 2 (inside):
-Nail File
B Layer 2 (inside):
-2D phillips/Awl
C Layer 1 (outside):
-SE Blade
D Layer 1 (outside):
-ScissorsC Layer 2 (inside)
-?????!!!!
D Layer 2 (inside)
-Eyeglass Driver/Tweezers--
So after planning. I notice...wait a minute! Even with ALL of the tools in one Squirt from 3 squirts...there's still a blank outside opening slot!!! What to do?!
A package opener? The standard file? a wire stripper? a warney blade? gut hook? Another pair of scissors? Staple pry bar?
AHHHHH MY BRAIN IS NOT WORKING!
-
It's all looking good mate, but a few thoughts if I may ...
-
The blade length seems too short to bother with serrations for me - are you sure it'll be worth the effort (if you drop that you're on an even tool count)
-
If keeping the SE blade, I think a package opener would round things off nicely
-
How are you overcoming the nail nick issue? The outer tools obscuring the inner tools - there isn't enough clearance on the backsprings for the pliers to reverse them either
-
-
@50ft-trad said:
It's all looking good mate, but a few thoughts if I may ...- The blade length seems too short to bother with serrations for me - are you sure it'll be worth the effort (if you drop that you're on an even tool count)
- If keeping the SE blade, I think a package opener would round things off nicely
- How are you overcoming the nail nick issue? The outer tools obscuring the inner tools - there isn't enough clearance on the backsprings for the pliers to reverse them either
I am going to give it a go anyways, the SE I made already is too aggressive. I am going to see about making a more gentle curved one. I've never been one to shy away from a challenge.
I was thinking of taking a Swann-Morton scalpel blade holder and adapting it to the last spot. I do a lot of paper craft and detail work and having one on the go would be pretty neat. Also, the replaceable blades would be nice too. Failing that, I think a super pointy, Exacto shaped blade would be good a substitute if it wouldn't fit.
All it would take would be a new profile on one of the blades and then a chisel grind with my Lansky sharpner.
As Evilolive has demonstrated when he assembled his, there is room for finger nails to get in there, it'll be SAK like, but still doable.
Here's the pics from his thread:


You'll notice that there is lots of space for deployment. The sandwiched chassis and spaces will work...I hope :)
-
how much bigger is it? -
Ah, I see - looks like the layers are well spaced. I'd got a more compact vision in my minds eye :)
-
More parts came in today.
A really worn E4 and a couple of P4's. The grey p4 will be the one to be disassembled.
I opened the package with a very generous early birthday gift from Cornholio, a gerber g10 EAB ;)

I also ordered a couple of Swann-Morton scalpel holders (steel ones) and I am going to try to shape and fit it into the extra blade slot I discovered.
-
I like the idea of sharp replaceable blades


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login