Got Paracord?
-
Two-strand stopper knots(ABoK #778) paracord fob, with a cross shield bead.

And what the knot looks like from top/bottom with two strands going in and coming out the center of the knot...

-
@Stormdrane said:
Two-strand stopper knots(ABoK #778) paracord fob, with a cross shield bead.

I likes that bead! :D
-
wanna that bead :D

-
That bead is 8) Love the knot as well

-
I too would be interested in that bead. Please point us to the supplier?
-
@Stormdrane said:
I bought the bead of ebay, just search for 'cross shield bead'. ;)Awesome! Thank you sir.
-
Say, is there a fairly easy way of wrapping paracord around a stave without it gaining gaps when used later?
Tried stretching it out, keeping tension, even added some shoe goo to the ends. A week later there's almost a full turn of gap appeared. :ahhh

Like to keep a loop up top for use with hands, with or without gloves. And keep my hand from slipping off on bad ground. Am in no way shape or form adept in weaving.
-
@Xelkos said:
Say, is there a fairly easy way of wrapping paracord around a stave without it gaining gaps when used later?Tried stretching it out, keeping tension, even added some shoe goo to the ends. A week later there's almost a full turn of gap appeared. :ahhh

Like to keep a loop up top for use with hands, with or without gloves. And keep my hand from slipping off on bad ground. Am in no way shape or form adept in weaving.
Did you see the post I made in the "Let's see those lanyard charms, trinkets and dangley bits!!!" thread? I think this is what you're referring to:
Larger image is in that thread in the Break Room on the second page or <a href="/post/673183">here</a>
*edit- Those beads are a great deal at $.99!¡!
-
Guess I might try putting a weight on it, then using a large piece of metal to tamp it against the next line and try again. it is not a big deal but I can feel the looseness in the grip - can twist it both ways.
That cross bead would look great on the loop bottom too.

Temped to see where to get a lanyard made for my


Might make it easier to hang onto with a 3 inch tail. -
@Xelkos said:
Say, is there a fairly easy way of wrapping paracord around a stave without it gaining gaps when used later?Tried stretching it out, keeping tension, even added some shoe goo to the ends. A week later there's almost a full turn of gap appeared. :ahhh

Like to keep a loop up top for use with hands, with or without gloves. And keep my hand from slipping off on bad ground. Am in no way shape or form adept in weaving.
You should wait for Stormdrane to come by; if anyone, he should have a good idea or two. Off the top of my head, if you intend on using a simple wrap around your stick, then look into adding some binding knot (e.g., prussian, constrictor, etc.) to start and end the weave. IMO the best would be to use an actual weave for the wrap; for example, something like this should work, if you can spare the time:
How to Rope Wrap a Wooden Staff by TIAT -
TIAT is ok but Stormdrane is better IMO
Maybe PM him with your need
or go to his blog and ask through a comment in the latest blog entry -
@Xelkos said:
Say, is there a fairly easy way of wrapping paracord around a stave without it gaining gaps when used later?JD's video is a good one to follow, I used the same spiral hitching on a hiking staff, just starting and finishing with a simple Turk's head knot, all one continuous length of paracord.
Here's another example working from the center of your length of cord, tying repeated half knots to get the twisting pattern.
And another with St. Mary's Hitching...
Those are fairly simple wraps. You can look to ringbolt hitching and long Turk's head knots for more advanced work if the knot tying bug bites you... ;)
-
I've only just discovered this forum, and I've been reading this thread with great interest. Some of you have been making paracord plaited belts, with 'standard" type tongued buckles and have noticed that the tongues tend to fray the paracord. There's a solution to this..here Down Under, a popular 'old-timer'- style belt is often made from thin kangaroo leather thongs, about 1/8'' wide. Ordinary style buckles don't work that well with thonging either..so what they often used to fasten the belts were 2 brass rings ( normally from old bridles/halters) I see no reason the same sort of fastening wouldn't work with paracord..and look good as well. See the following picture. The only change to a normal style belt is to increase the overall length by 7 or 8 inches to allow for turn-over.

-
@Svadilfari said:
I've only just discovered this forum, and I've been reading this thread with great interest. Some of you have been making paracord plaited belts, with 'standard" type tongued buckles and have noticed that the tongues tend to fray the paracord. There's a solution to this..here Down Under, a popular 'old-timer'- style belt is often made from thin kangaroo leather thongs, about 1/8'' wide. Ordinary style buckles don't work that well with thonging either..so what they often used to fasten the belts were 2 brass rings ( normally from old bridles/halters) I see no reason the same sort of fastening wouldn't work with paracord..and look good as well. See the following picture. The only change to a normal style belt is to increase the overall length by 7 or 8 inches to allow for turn-over.I like that belt, if could only get one my size.


-
Here's something I made this evening to work with my S2
Sent from Endor using Schlapatok

-
I like this lanyard that Donald made for his Wenger SI. Am assuming that is one-piece of paracord, and wonder how one makes something like that.

Also have another idea: Is there a way to end a lanyard with a small magnifying glass like those on Vics & Wengers? Probably would need a sliding cover to protect the the magnifier element.
Was wondering if anyone had some ideas on that. It could help put a magnifier on knives and not need to modify them ... although may not be as sexy. -
@Xelkos said:
I like this lanyard that Donald made for his Wenger SI. Am assuming that is one-piece of paracord, and wonder how one makes something like that.That one is shown as knot #787 in 'The Ashley Book of Knots'(ABoK) and goes by many different names including some of these listed in Ashley's book: the sailor's knife lanyard knot, marlingspike lanyard knot, single-strand diamond knot, two-strand diamond knot, bosun's whistle knot, boatswain's whistle knot, button knot, and just plain 'lanyard knot'. Lots of tutorials online to tie it and seeing it done from different perspectives can help when just one sometimes isn't enough.
Here's a short <u>video</u> showing the way I learned to tie it. :)
-
@Xelkos said:
I like this lanyard that Donald made for his Wenger SI. Am assuming that is one-piece of paracord, and wonder how one makes something like that.
That one is shown as knot #787 in 'The Ashley Book of Knots'(ABoK) and goes by many different names including some of these listed in Ashley's book: the sailor's knife lanyard knot, marlingspike lanyard knot, single-strand diamond knot, two-strand diamond knot, bosun's whistle knot, boatswain's whistle knot, button knot, and just plain 'lanyard knot'. Lots of tutorials online to tie it and seeing it done from different perspectives can help when just one sometimes isn't enough.
Here's a short <u>video</u> showing the way I learned to tie it. :)
Awesome. Thank you <u>very</u> <u>much</u>. Looks easier to tie it than by looking at the knot. Now to get some paracord later in the day and try my hand at it.
:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login