Bear MGC Tools?
-
@supratentorial said:
.............but I do like construction of the handles of the Bear Jaws better.........I do too! The gauge of stainless sheet that Bear uses in their handles is noticably thicker than anyone else's. Very strong. Makes me wonder how they are able to form and bend it into such a complex shape?
-
Excellent information guys!
While the bit adapter might be an interestinga addition, it isn't something I would use. That being said, it would offer some options beyond the bulky Phillips tip. I agree on the Nicholson variant, that is a more practical looking Phiilips driver.
I compared the Journeyman to a Kick and my impression was that I could probably cut up a Kick with the Journeyman. The wire cutters are that good and the Kick feels that flimsy. Were I to choose between the two tools, I would pick the Journeyman or any of the comparable Bear Jaws variants over the Kick.
In regard to sheaths, the second one I received looks about the same size as the Bear and Son in the picture above, without the leather patch. Hard Hat offers both with and without the patch. I would prefer leather, but that wasn't an option. One of these days, I may get the chance to drag out my tools and make my own.
-
Well, in the Kick's defence, I don't think they were ever meant to be in the same class...
Def
-
I'll concede that point. Since theare from the same era, the original Bear MGC design was designed to compete with the original Leatherman PST. Those were, of course, the days before aluminum supplanted steel in many places.
-
I'm not sure if you guys are suggesting otherwise (?) but the Kick's handles are 400-series stainless steel. (A thin gauge, with plastic inserts, but stainless steel nonetheless)
~Bob
-
Well my point was (supposed to be) that the Kick is a lightweight tool while the Bear is supposed to be more of a heavy duty tool. Kind of like comparing a hatchback to a Humvee...
At least I think that's what I was trying to say!
Def
-
I apologize for any confusion or inadvertent slur on the Kick. I'm certain that it is sufficient for its intended role.
Once my wife gets back with the one I put in her car tool kit, I will apologize to it directly. I wouldn't want the rumored Leatherman Mafiosi paying me a visit.
-
Sorry to bump this old thread. I've just bought a Bear Jaws marked with the Mac logo, and "FIRST MAC TOOLS PRODUCTION RUN" on the plain blade.
Nice tool, but I was disappointed to see it didn't have a saw blade. -
@appletree_man said:
Sorry to bump this old thread. I've just bought a Bear Jaws marked with the Mac logo, and "FIRST MAC TOOLS PRODUCTION RUN" on the plain blade.
Nice tool, but I was disappointed to see it didn't have a saw blade.Thats a bit off a bummer :(, but at least the rest of the tool was good though :)
-
Oh yeah, nice thick steel. Does the first production run status give the tool any extra collector value ? I was thinking of offering it on here in exchange for the similar version with saw blade.
It's non locking, so for obvious reasons it's a tool i'd like to EDC. -
Appletree:
If Bear's policies haven't changed since the were divested by Victorinox and became Bear & Sons, you should be able to order a saw blade for your Bear Jaws. I've ordered several parts over the years. The one caveat is to make sure the Bear rep knows you're not ordering for the Super Bear Jaws. For some reason, both times I ordered a saw blade, the sent the Super saw. Other than that, I really like the Bears. Their handles are very comfortable and strong.
Regards, Bill.
-
If you don't mind a suggestion from a long-term Bear user, if you decide to trade for a non-locking Bear, try to get a photo of the tool with its knife blades fully opened. I don't know if it bothers you, but I like my knife blades, as well as all the tools for that matter, to point straight from the bolster of the tool- I think using the knife is more facile that way. Two of my Bear's (gifts from my sisters) knives, saws, files and flats (oddly not the Phillips!) point upward about 3 to 5 degrees when opened. My non-locking Bears are dead-straight from the bolsters. My Toolzalls are also dead straight. If canted tools don't bother you, no big deal. It seems Bear's fit and tolerances vary, with their "Bear"-branded tools having more latitude. I just thought I'd mention this.
I know I drive members nuts with talk of Bear tools, but they are very nice tools when you get a good one-simple build, tough and robust. I used them as my job tools for years and never had one fail.
Just a thought, Bill.
-
Ahh, just the kind of gentlemanly statement I'd expect from a Swiss Army user. :D
My regards and thanks, Bill.
-
Thanks for the suggestions Biru.
I think I'd prefer to leave it "as is" for a collector, it is a non-locking model, and as far as I can see the blades & tools do extend straight.Ideally i'd like the model featured in Spoonrobot's review (which I believe is also non locking). Does this sound like a fair offer to make on here ? If so i'll take a few snaps and place it in the trade section.
-
How common is it for the 4" Bear Jaws tools to have saw blades? Almost all of them I've seen do not have a saw.

-
Besides their low-key approach to advertising and marketing their tools, Bear seems to have a variable approach in the loading of their tools. I have one locking tool (a 155L) that has a saw. I received as a gift an identical model without saw (I installed one of the Super saws I received-you must cut them down). I have a Sportsman model (my favorite of their standard size) with a saw but another non-locking model (not labeled "Sportsman") without-I wonder if that particular model is a second as it has the worst tool set of all my Bears. My Toolzall Electrician and Pro both have saws, the Toolzall "Cooperman" does not and has a Leatherman-type Phillips. I used to visit a Bear dealer about 150 miles from here, and they carried several models of what appeared to me to be the same tool either with or without the saw and sometimes having a semi-serrated knife blade. Some models have a straight AND serrated blade. I believe they dropped most if not all the Bears as I don't believe they were particularly good sellers. Still, I think the eccentricities of Bear tools was was drew me to them.
-
@Biru said:
... My Toolzall Electrician and Pro both have saws, the Toolzall "Cooperman" does not ..... Still, I think the eccentricities of Bear tools was was drew me to them.My Crescent ToolZall Pro has no bone/wood saw. But, it has both straight and serrated knives and a file. The file has teeth on one edge which some my optimistically call a metal saw. :D
The rugged feel and bolted construction is compelling. I saw an actual Bear multitool at a local gun store, but the $50+ price dampened my curiosity.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login