OPINELS
-
I've been on these in the past
Why am I not surprised?

Yes, the dates would have been nice. I assume they are in some sort of order, up to down or left to right...
::) :D you could be right
i think the really old ones don't have print on the handles,although some of mine look 100 years old all ready lol this is what I love about opies 
-
I decided to refinish the handle on my #6. I sanded it down, gave it a coat of prestain to prevent any blotchy spots, and two coats of a heavy-bodied wiping stain. After it was dry, three coats of acrylic polyurethane finished it up. Came out pretty nice IMO.


The blade is starting to pick up a nice bit of patina, it's being used pretty heavily at work and at home on all sorts of things.
-
@jerseydevil said:
I decided to refinish the handle on my #6. I sanded it down, gave it a coat of prestain to prevent any blotchy spots, and two coats of a heavy-bodied wiping stain. After it was dry, three coats of acrylic polyurethane finished it up. Came out pretty nice IMO.

The blade is starting to pick up a nice bit of patina, it's being used pretty heavily at work and at home on all sorts of things.
Looking good mate
will the acrylic polyurethane coating make the handle water proof & provide a bit protection from some rough & tumble

-
@MultiMat said:
Looking good mate
will the acrylic polyurethane coating make the handle water proof & provide a bit protection from some rough & tumble

Yes it will Mat.
The trick is to use the right product, give it enough coats, and let it cure fully before using it. It sat for 5 days after the last coat of poly to let it harden fully. Just because it's dry to the touch doesn't mean it's good to go. Acrylic topcoats like that generally need more coats than a similar oil to be as tough. And the stuff I used is floor-rated, I've seen it used on the wood floors of school gyms. And if you don't already know, yes, I sell all this for a living. ;) -
Looking good mate
will the acrylic polyurethane coating make the handle water proof & provide a bit protection from some rough & tumble

Yes it will Mat.
The trick is to use the right product, give it enough coats, and let it cure fully before using it. It sat for 5 days after the last coat of poly to let it harden fully. Just because it's dry to the touch doesn't mean it's good to go. Acrylic topcoats like that generally need more coats than a similar oil to be as tough. And the stuff I used is floor-rated, I've seen it used on the wood floors of school gyms. And if you don't already know, yes, I sell all this for a living. ;)
mate
We might have to get you to do a step by step mate + products used
I would love to give some protection too some wooden SAK scales when I finally :ahhh get around to doing some. -
Tom is the man for anything paint or stain related. A degree in history makes you a better paint salesman I'm told.

Ash's mobile on the move.
-
@Ashley said:
Tom is the man for anything paint or stain related. A degree in history makes you a better paint salesman I'm told.
:D
Mat, that sounds like something I could do easily. I do have another Opinel, a 5, here still with its original handle finish. Might be time to bring the camera in to the store.......
-
anyone fixed blade play on their opies?
my carbon no 8 is solid as a rock
but a few of my stainless steel ones have up and down blade play.
i took of locking ring and squeezed it tighter but that didn't help.
-
I've owned five Opinels so far and none of them have had any play at all. For such an inexpensive knife that's a bit amazing to me. I've had Case and other slipjoints that have had horrible play at times.
-
I've had the No 8 for about two weeks now and absolutely love it
I use it to cut my steaks or other food stuffs & cut cigars. The blade on this thing is superb
I haven't needed to sharpen it yet but I have run it over a steel and strop. -
@jerseydevil said:
I've owned five Opinels so far and none of them have had any play at all. For such an inexpensive knife that's a bit amazing to me. I've had Case and other slipjoints that have had horrible play at times.i've read that the wood can dry out depending on where they are stored and cause the blade play.
one trick i read was to file a little but of the blade tang so that the locking ring can twist a little further.
hoping someone has an easy answer for me.
I can't stand blade play
-
@WiSAKfan said:
i've read that the wood can dry out depending on where they are stored and cause the blade play.one trick i read was to file a little but of the blade tang so that the locking ring can twist a little further.
hoping someone has an easy answer for me.
I can't stand blade play
Maybe some linseed oil on the handle to keep the wood more moist
We used that stuff like crazy on our hand tools in the Army 
-
i tried soaking it in oil to no avail.
I think i fixed it though by removing locking ring and giving the pin a few strikes with a hammer.
-
edit, yeah i got it down now. fixed 3 of them of the bunch i got (see my other thread about it)
don't waste any time trying to expand wood or use oil to fix the blade play.
it's a matter of the ring not being on correctly and not sliding over enough.
get yourself a split ring pliers. fancy ones can open and close, the cheap ones i got have one that opens when you squeeze and the closes when you squeeze.
use the former and take off locking ring. often just doing that makes it a little looser to put it back on.
one thing i found is you can find the sweet spot by NOT using the pliers to put the ring back on; just put it in the right position above the other ring and push down on it. it will pop it on.
i just would keep trying it, until i where there was no blade play.
i'm posting because one might think you would need to tighten the ring to make less play. then the ring doesn't want to move as far when you twist it.
i had a bit of bad luck when i was flicking a very loose one i fixed, i dropped it on the concrete and the very tip bent and broke off when i tried to bend it back.
time for a knife shape mod, prob just a simple drop point.

-
You can remove most newer opies rings by opening the blade while the ring is in the closed locked position.
i also use my anvil to tap the pin to tighten things up 
-
that sounds horribly uncivilized
now bring me my tea!

-
Not feeling the love for Opinels.
What am I missing? -
Very cheap. Very sharp. Very comfy in hand. You don't have to like them of course, there are knives out there that lots of people rave about that I don't get either. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login