Hints and Tips thread.
-
And you guys wonder why we don't make some threads stickies. ::) Nobody reads stickies.
Problem is, I don't read stickies in other forums...
You should. There is a lot of useful info in other subforums, especially for SAKs in the Mod Squad.
AND of course the general forum rules..

Always read the stickies.
Most the time have even tried searching before I posted.
-
I'll play, PEN TRICK


-
Okay, a serious one...
I find that the brass rod I buy from the hobby shop is in a fairly soft if not annealed state.
Easy to peen, but not the strongest for pins.By putting it in the chuck of a cordless drill and bending it in a curve with the drill running, it work hardens the brass making for stiffer pins that wear less and don't swell all the way down when you peen the ends causing tight pivots.

This 1.6mm rod for 58mm SAKs I bend it through my fingers as it gives better "feel" for how much hardening is happening. Thicker rod I use a piece of wood with a hole drilled in it.
The rod will heat up as you work it so don't go burning yourself and blaming me!!
You can feel the difference, before working the rod can be bent easily but after it has some "spring" to it.
-
I stick the pen into the beak of the small pliers at a 90 degree angle, works well too.
-
A sewing needle is a good tool for removing unwanted crud in your knife. The tip will easily get the gunk out of the nail nicks and the tiny crevices; the head of the needle makes a good sideways scraper that won't scratch the knife up.
-
It would be nice, if someone with lots of free time could compile some of this great stuff. Unfortunately it takes forever sometimes to sift the jewels from the sand.
-
Are there any date codes on Victorinox & Wenger knives?
-
@Xelkos said:
Are there any date codes on Victorinox & Wenger knives?http://victorinox.saam007.com/91mmtools.php
http://www.e-webtechnologies.com/sak/Victorinox_Stampings___Trademarks_-_Update_12FEB08.pdf
-
Performance of the not-so-great wire stripper notch can be improved by opening the small knife blade and bottle-opener/screwdriver/wire-stripper at the same time. Pass the wire over the knife edge to partially score the insulation before putting it in the notch... then angle the blade to bend the wire and pull.
On most 91 mm models, these two blades are positioned together and it's easy to use them together.
-
NEVER! NEVER!! NEVER!!! Soak your SAK with it's standard red scales in rubbing alcohol... it appears they are sensitive to it.

I just used a 91% Isopropyl Alcohol to sterilize my knife, and my brand new scales now look like they were original to the knife (3 years), with a really nasty scrape. You can imagine right now I feel like a horse's... backside.

-
Keep the the bail down on your Wenger knife before closing the blade.

-
How does that Case compare to a Spartan?
-
When cutting metal with the metal file, don't keep the tool's edge perpendicular to the material but give an angle of 30-45 degrees. It is easier to start this way. Once you make an indent you move to 90 degrees.
Every few minutes allow the blade to cool a bit (and your muscles to rest) when the material is hard and thick.
With the wood saw start one way (pull or push) for the first strokes.
Of course these modes might suit better my hands and I don't claim they are universal. -
Not sure why any newer knife would use a bail. It seems like a completely outdated idea.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
