What did you use your Leatherman for today?
-
Today so far, I've just used my PST II as a piece to admire
Slow say so far, but it's still early yet. -
Typical abusive day for the poor Surge. Cutting layout template out of cardboard with the knife wasn't bad, but the awl probably didn't like being used to scrape hardened epoxy out of hilti bolt threads, and I bent the heck out of the saw blade trying to cut a keyhole in the base of a temporary plywood wall in order to run a measuring tape through it.
"hey you want a screw gun?"
"by the time you get to the gangbox and back, I'll be done" [/philips head bit kit] -
Used the tip of the PST's can opener to clean under my nails. Actually doesn't do a bad job.
-
I used my PST II's phillips and large flathead to assemble a baby bouncer seat and the crib. The crib's bolts were allen's head, but the barrel nuts into which the bolts had to be housed required the flathead to keep them lined up correctly.
While using the phillips on the bouncer seat though, it closed on me a couple times, and without a lot of force either. The handles themselves even opened up some when this would happen. That's the one big downside to non-locking tools and ,unfortunately, why the PST won't get lots of use for screwdriver jobs. It is still good for other things though. It's not a big deal though, as I really didn't plan on using it too much anyway as I don't want to cause any damage or wear on it.
I still love it though :D
-
@Monrogue said:
That's the one big downside to non-locking tools and ,unfortunately, why the PST won't get lots of use for screwdriver jobs.I still love it though :D
If you want to do screwdriver jobs with a PST you could get yourself a LM tool adapter, they made one that works very well with a PST (the original version with two tangs, not the later "Universal tool adapter" with no tangs). Then you can use any std 1/4" hex bits.
-
Thanks for the tip - I was using my surge today and because they were in a fairly tight spot it was difficult to get the plier cutting blades into the cable tie, I ended up using the PE blade to cut off the excess. Nail clippers would have been much better for this task.
So now I have a question, do any MTs come with decent nail clippers ? Preferably plier based, but I will get a knife based tool if I have to.
-
I said this elsewhere, but better for cutting zip ties than a nail-clipper, if you have it, is a side-cutter. Unfortunately, few multi tools that I've seen have a side cutter as an attachment. It would be very handy for someone who cuts zip-ties frequently.

-
That's the one big downside to non-locking tools and ,unfortunately, why the PST won't get lots of use for screwdriver jobs.
I still love it though :D
If you want to do screwdriver jobs with a PST you could get yourself a LM tool adapter, they made one that works very well with a PST (the original version with two tangs, not the later "Universal tool adapter" with no tangs). Then you can use any std 1/4" hex bits.
Thanks for the info
I will have to look into that.Today I used the PST II's knife blade to cut up a bunch of cardboard left over from the baby crib and bouncer seat I assembled yesterday. It was very sharp and worked very well, even on the tip of my thumb :-[
-
I used the PST II's pliers to break up a plastic hanger that had broken and was no longer usable. Also used the Rebar's wire cutters to cut some wire that was holding some fake flowers together on a "bouquet" made for my wife's baby shower at work.
-
I used the pliers on two Leatherman tools, a new Wave and a Blast too straighten the slightly bent corkscrew on a vintage Victorinox Rainier (partially serrated blade).
I used the Wave pliers to hold the base of the corkscrew and the Blast pliers to gently bend the top of the corkscrew slightly to one side so it cleared the liner better.
Is there a prize for using multi tools to fix other multi tools?
Tony
-
Used the flat driver on the Splash (Fat squirt) to change out a snapped needle on Betty today.

The Splash hanging out with Betty. Now that's a real looking woman.

-
Back to the fence. Got home and the dog was out. Fencing came off post. Twisted some wire around a post with my Sidekick.
-
Well this story is actually from yesterday, but I didn't get the chance to get on here last night.
While I was delivering some supplies to the main office here at work, the UPS guy drove in to pick up any packages and whatnot from the dropoff box. As I was exiting the building, he asked me if I had a phillips screwdriver in the truck he'd seen me unloading from. There are no tools in that company vehicle, so I happily replied, "No, but I have one on me." He asked, "Oh, you have a Leatherman on you?" To which I proudly replied, "Yes I do."
So I reached into my back pocket, pulled out my Rebar, got the phillips screwdriver out and handed it to him. He needed to remove the lock from the dropoff box as it had been broken for some time and no other driver had bothered to fix it. He mentioned that he normally has a Leatherman on him, but had forgotten it that day.
Let that be a lesson learned, do not forget your multitool(s) each morning :D -
@Metropolicity said:
Used the flat driver on the Splash (Fat squirt) to change out a snapped needle on Betty today.The Splash hanging out with Betty. Now that's a real looking woman.

Wish I new how to Wolf Whistle in text.
-
Should put that in the Woman Thread

-
Goofing around with my mut.

-
Used my Leatherman Juice Pro scissors to cut some Gorilla Tape, used to reinforce/secure the bed liner piece on my truck's tailgate.
-
I just used the Juice CS4's pliers to pull a slippery headphone plug out of the headphone jack of my husband's phone. Any small plier would have worked, but the Juice was nearest to hand.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login