Lovin my Dime
-
I just got my (green) Dime yesterday. Wohoo!
I haven't had a lot of time to play with it, but first impressions are VERY good. Minus the file. :D
I like just about everything about it, and in the inevitable comparison to the Leatherman Squirt, it holds up very well.
-
Nice !! i liked your write up on the juice scissors you are right they are junk. I tried cutting some felt with them and lets just say my sak killed it !!
-
Just got my dime as well. Love the feel and look but the blade was not sharp at all. Is this normal? Otherwise the mini tool is perfect.
-
My blade was paper-cutting sharp out of the package.
Colt... thanks. I just reviewed the Dime scissors as well...
</post/678429>I would like to think that I'm above style considerations in my tool selection, but I have to admit, the dime just looks SWEET! And as I bought it new, I got to choose what color I wanted, and green is my favorite color. I'm quite happy with it so far.
I was also going to throw this out there are a thought. The early models of the Squirt had bolts, not peened pins. Does anyone suspect that the Gerber Dime might have a similar switch in style in the future, or is Gerber likely to stick with the current construction method?
-
I've been carrying the Dime more and more lately, usually on my keys when I'm not at work and don't feel like carrying a larger tool. I think Gerber hit a home run with this one.

-
@Lynn LeFey said:
My blade was paper-cutting sharp out of the package.Colt... thanks. I just reviewed the Dime scissors as well...
</post/678429>I would like to think that I'm above style considerations in my tool selection, but I have to admit, the dime just looks SWEET! And as I bought it new, I got to choose what color I wanted, and green is my favorite color. I'm quite happy with it so far.
I was also going to throw this out there are a thought. The early models of the Squirt had bolts, not peened pins. Does anyone suspect that the Gerber Dime might have a similar switch in style in the future, or is Gerber likely to stick with the current construction method?
Good question. I don't expect any change to the Dime ... if they were going to change anything, they'd change quite a few things and then give it a different name - seems to be how they operate. Other than the MP400 and MP600 things don't seem to stick around that long either ... I hope the Dime has better longevity than many of it's other tools
-
Is the package opener sharp on other people's Dime? Mine isn't exactly sharp. As a comparison, the package opener on the Wingman will cut 550 paracord. The Dime's will not (at least, not as it came out of package. I may change that).
EDIT: Oooo.... Hmm, I just tested my Dime, trying to cut a piece of 12-gauge solid copper wire. The blades were flexing so much I feared the tool was going to pop its pivot. UGLY fail. I tried the Leatherman Style PS by comparison, and the Leatherman cut the wire reasonably well, with no scary flexing. The wire cutters on the Dime are only good for very light use only, it seems.
-
I have posted the problems I had with the Dime so i will not do it again. It seems like the later ones are a lot better than the original ones a few of us bought.
Despite the QC problems it had (usually fixed with a hammer) I use it when I want the minimum size + maximum ability in a low cost package; like when I am abroad.
The package opener is not very sharp but it has a decent point, so once the point punctures the plastic you can just pull it around to cut it open, easily.
-
dks, could you put up a link to the thread with the issues you had? I'd appreciate it.
-
I love the the Dime, but I love even more the PS4. Its marginally smaller, lighter and more elegant in design (IMO). But that did not stop me from ordering a green Dime today, in order to complete the color trifecta. I do love the Dime though, and Gerber deserves props for it.

-
@powernoodle said:
I love the the Dime, but I love even more the PS4.I suspect this is how I'd feel with a PS4 as well. I need to get one. I traded away a Squirt S4 so I'm fairly familiar with the tool, and if I compare the scissors on the Style PS to those on the Dime, the PS wins.
I like the LOOK of the Dime more. And, maybe more important, I think Gerber is finally edging up on Leatherman with this tool.
-
Yeah, they are pretty much neck and neck, with the PS4 prevailing in the factors I noted, and the Dime winning with its dedicated bottle opener, v-grind main blade (my subjective preference), tweezer and price. And on the real point of carrying a PS4 or Dime, i.e., the pliers, they are pretty much dead even. At least thats how I see it.
-
@Lynn LeFey said:
dks, could you put up a link to the thread with the issues you had? I'd appreciate it.Here is the thread with the problems we had with the 1st lot of Dimes:
</topic/36210
and one more:
</topic/36353I have not heard of any more problems since, so I assume that after we Beta tested them :P they sorted out any problems.
-
Ah... thanks. I vaguely remember the first thread.
And, THAT's why I'm never an early adopter of new tools.
My most sincere thanks to all who did the 'shakedown cruise' on this tool for the rest of us.

-
The blade of my all black dime was dull as in could not even cut paper smoothly...but the red and black I got a few weeks after was razor sharp...any reason for this? could it be because the blade was black?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
