Different Swisstool plier heads , the truth
-
Here is the official Victorinox Customer Service answer on this topic of plier change:
Thank you for contacting Victorinox Swiss Army.
Yes That’s the latest design
Please contact us if you need further assistance.
Sincerely,
Victorinox Swiss Army Customer Service=========== previous message(s) ===========
On 2013/01/19 01:32:16 wrote:
Swisstool - the latest pictures show the plier head slimmer and skinnier than before. Is this the latest design? Why the change?
thank you very much. -
odd?? Here is the message they sent me, which is different than what they told you. They claim the plier should have a shield and or the word victorinox.
-------- Original message --------
Subject: Victorinox Swiss Army Customer Service Inquiry
Date: Wed Jan 09 05:44:00 MST 2013
From: Victorinox Consumer Support ap3373sdvf0x.vef6uamodo5k@cs.swissarmy.com
To: terry.labrum@yahoo.comDear Terry,
Thank you for contacting Victorinox Swiss Army.
this is what I have found out for you,
Cross and Shield and or Victorinox should appear on pliers headsPlease contact us if you need further assistance.
Sincerely,
Victorinox Swiss Army Customer Service
-
I asked only about a SKINNIER plier head and if they are adopting it - I did not ask about identifying stamps or marks on plier head.
In any case, if any of us want the bigger stronger plier head, I suppose now is the time to buy the old stock while it lasts.
-
I don't mean to argue. I just don't understand the change.
I mention the stamps because the photos I have seen with the skinnier plier on the new handles have no shield. But the customer service rep told me that the tools do have shields. So it seems to me there are some inconsistancies with their photos. I can see them going back to the skinnier head possibly but not switching back to how the plier was assembled to have maximum strength in a clockwise motion. It just doesn't make sense.I have worked with their customer service before, and they have led me astray. Not willfully, they just weren't aware of the minute differences in their tools. Recently that happened when I asked about the new serrated sheepsfoot blade. I recieved a response that all swisstools (not spirits) have a pointy blade. Which is accurate, just not what I was asking about.
-
I have to admit that I don't even own a Swisstool but I was wondering if this one is showing the new style we are looking at? I'm not very up on these but that doesn't look like the 2005 pliers to me.
@tap78 said:
I finally got a ST ... my Leathermans - beware :)

Just bought by tep78 and doesn't have the old red logo.
-
Can I jump into this debate too.
The postman just delivered my Vic Swisstool CS - Bargain from amazon warehouse deal.
Anyway it's turned up today and well it doesn't look right. The red logo has gone, the pliers don't show the Cross emblem anywhere. Yes, it's stamped above the vic' name on the handle but not the plier head. Also, mine has slight play in the plier head, straight out of the box. I've totally scrutinized it cannot find any trace of previous use - the box was slightly crumpled, so I'm guessing that's the reason for the BIG reduction. Surprised this got past Vic's QC.
Not impressed at all really - I think I may well be returning it as it was purhased with a xmas gift card I received.
However as it was cheap, didn't I read somewhere on here about striking the plier with a centre punch to remove this problem.
-
Gareth, that is even weirder than the other tools I have seen. It has an old plier and old handle but no red paint...
-
Okay. I think I see. That is a very old model. because it does not have the cork screw hole. It gas a small hole instead. It is on the metal backstop to the pliers. Does that make sense?
-
Scrappy, you definitely know more about these than I do(
) but I do see what you mean. So do we think they are releasing older MT's but without the red logo? ??? -
Scrappy - you are right about the latest photos of the skinnier plier - they do not have shield stamps on them. Someone previously mentioned that a recently purchased wider plier version was also missing the shield stamp on the wider plier. Some here assumed Vic made a change making both tools (full sized and Spirit) without shield stamps. Time will tell.
Gareth - the photo is old - You can barely make out the shield stamp on the handles in FRONT of the "Victorinox" stamp. The owner probably rubbed off the red paint as some owners are known for doing. Some owners here have done so to theirs.
Tosh - most full size Swisstools do have a small amount of play in the plier pivot - all the ones I've looked at have play - my own and also in various stores. Not a bad thing - in that the mechanism has smoothness to it, unlike other brands who don't have play but the mechanism might be a bit tight and rough. But like you, I would probably prefer less play and more tightness.
-
-
Mine looks like that too. I am sure that is the most recent. The photos showing the smaller plier head are from prototypes and are not production models. One way to tell that is by looking at the corkscrew adapter. If the photo has a circle it is not a production model. If it has a squiggly triangle to connect the corkscrew, it is a production model.
I have said this before. I spoke with a current dealer and this plier head is the current model being shipped to dealers. -
Scrappy the models with smaller plier heads and round corkscrew hole WERE production models and not prototypes , there are many of these models in circulation , I have one that has no hard wire notch in the cutters which makes it a really early one.
I've always preferred the 98 plier head, it opens and closes with more resistance.
Dunc
-
I am sorry Dunc. I didn't mean to say they were never production models. I meant the recent photos of the old plier with the new handles and sheepsfoot blade are not a production model. They are just stock photos. The current production model looks just like the pic wave180 shared.
Older models pre 2002 did use the smaller plier. I carry one as an edc often. Thanks for helping clarify my statement. -
Sorry Scrappy I miss understood you , havnt had my coffee yet

-
@scrappy said:
Mine looks like that too. I am sure that is the most recent. The photos showing the smaller plier head are from prototypes and are not production models. One way to tell that is by looking at the corkscrew adapter. If the photo has a circle it is not a production model. If it has a squiggly triangle to connect the corkscrew, it is a production model.
I have said this before. I spoke with a current dealer and this plier head is the current model being shipped to dealers.You just made me a very happy man. That's awesome news that the New Swisstool with the sheepsfoot serrated blade still has the larger pliers

-
I just received a brand new silver SwissTool that looks as the one below with one more change - there is no shield embossed on the pliers head anymore. The pliers head is blank (although nicely machined) on both sides. Standard SwissTool, sheep foot serrated blade as the one in the pic. Very nicely built otherwise, no blade/tools play (usually associated with the SwissTools), thight and smooth at the same time.
Few weeks ago I got a BO variant of the same SwissTool standard model from Tim (Tim, if you read this:
!) and that one looks exactly as the one in this pic, the embossed shield included, just in all black. -
Swiss Tool Black plier heads with Blasting Cap Crimper

-
Very nice Melvin
And congrats, those with the cap crimper are not seen very often. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
