Got Paracord?
-
@Xelkos said:
Say, is there a fairly easy way of wrapping paracord around a stave without it gaining gaps when used later?Tried stretching it out, keeping tension, even added some shoe goo to the ends. A week later there's almost a full turn of gap appeared. :ahhh

Like to keep a loop up top for use with hands, with or without gloves. And keep my hand from slipping off on bad ground. Am in no way shape or form adept in weaving.
You should wait for Stormdrane to come by; if anyone, he should have a good idea or two. Off the top of my head, if you intend on using a simple wrap around your stick, then look into adding some binding knot (e.g., prussian, constrictor, etc.) to start and end the weave. IMO the best would be to use an actual weave for the wrap; for example, something like this should work, if you can spare the time:
How to Rope Wrap a Wooden Staff by TIAT -
TIAT is ok but Stormdrane is better IMO
Maybe PM him with your need
or go to his blog and ask through a comment in the latest blog entry -
@Xelkos said:
Say, is there a fairly easy way of wrapping paracord around a stave without it gaining gaps when used later?JD's video is a good one to follow, I used the same spiral hitching on a hiking staff, just starting and finishing with a simple Turk's head knot, all one continuous length of paracord.
Here's another example working from the center of your length of cord, tying repeated half knots to get the twisting pattern.
And another with St. Mary's Hitching...
Those are fairly simple wraps. You can look to ringbolt hitching and long Turk's head knots for more advanced work if the knot tying bug bites you... ;)
-
I've only just discovered this forum, and I've been reading this thread with great interest. Some of you have been making paracord plaited belts, with 'standard" type tongued buckles and have noticed that the tongues tend to fray the paracord. There's a solution to this..here Down Under, a popular 'old-timer'- style belt is often made from thin kangaroo leather thongs, about 1/8'' wide. Ordinary style buckles don't work that well with thonging either..so what they often used to fasten the belts were 2 brass rings ( normally from old bridles/halters) I see no reason the same sort of fastening wouldn't work with paracord..and look good as well. See the following picture. The only change to a normal style belt is to increase the overall length by 7 or 8 inches to allow for turn-over.

-
@Svadilfari said:
I've only just discovered this forum, and I've been reading this thread with great interest. Some of you have been making paracord plaited belts, with 'standard" type tongued buckles and have noticed that the tongues tend to fray the paracord. There's a solution to this..here Down Under, a popular 'old-timer'- style belt is often made from thin kangaroo leather thongs, about 1/8'' wide. Ordinary style buckles don't work that well with thonging either..so what they often used to fasten the belts were 2 brass rings ( normally from old bridles/halters) I see no reason the same sort of fastening wouldn't work with paracord..and look good as well. See the following picture. The only change to a normal style belt is to increase the overall length by 7 or 8 inches to allow for turn-over.I like that belt, if could only get one my size.


-
Here's something I made this evening to work with my S2
Sent from Endor using Schlapatok

-
I like this lanyard that Donald made for his Wenger SI. Am assuming that is one-piece of paracord, and wonder how one makes something like that.

Also have another idea: Is there a way to end a lanyard with a small magnifying glass like those on Vics & Wengers? Probably would need a sliding cover to protect the the magnifier element.
Was wondering if anyone had some ideas on that. It could help put a magnifier on knives and not need to modify them ... although may not be as sexy. -
@Xelkos said:
I like this lanyard that Donald made for his Wenger SI. Am assuming that is one-piece of paracord, and wonder how one makes something like that.That one is shown as knot #787 in 'The Ashley Book of Knots'(ABoK) and goes by many different names including some of these listed in Ashley's book: the sailor's knife lanyard knot, marlingspike lanyard knot, single-strand diamond knot, two-strand diamond knot, bosun's whistle knot, boatswain's whistle knot, button knot, and just plain 'lanyard knot'. Lots of tutorials online to tie it and seeing it done from different perspectives can help when just one sometimes isn't enough.
Here's a short <u>video</u> showing the way I learned to tie it. :)
-
@Xelkos said:
I like this lanyard that Donald made for his Wenger SI. Am assuming that is one-piece of paracord, and wonder how one makes something like that.
That one is shown as knot #787 in 'The Ashley Book of Knots'(ABoK) and goes by many different names including some of these listed in Ashley's book: the sailor's knife lanyard knot, marlingspike lanyard knot, single-strand diamond knot, two-strand diamond knot, bosun's whistle knot, boatswain's whistle knot, button knot, and just plain 'lanyard knot'. Lots of tutorials online to tie it and seeing it done from different perspectives can help when just one sometimes isn't enough.
Here's a short <u>video</u> showing the way I learned to tie it. :)
Awesome. Thank you <u>very</u> <u>much</u>. Looks easier to tie it than by looking at the knot. Now to get some paracord later in the day and try my hand at it.
:D -
@Xelkos said:
I like this lanyard that Donald made for his Wenger SI. Am assuming that is one-piece of paracord, and wonder how one makes something like that.
That one is shown as knot #787 in 'The Ashley Book of Knots'(ABoK) and goes by many different names including some of these listed in Ashley's book: the sailor's knife lanyard knot, marlingspike lanyard knot, single-strand diamond knot, two-strand diamond knot, bosun's whistle knot, boatswain's whistle knot, button knot, and just plain 'lanyard knot'. Lots of tutorials online to tie it and seeing it done from different perspectives can help when just one sometimes isn't enough.
Here's a short <u>video</u> showing the way I learned to tie it. :)
That wasn't too hard :) Had a piece of nylon laying around, so I tried, made it alright in one time :)
-
Here's a few more tutorial links to see it tied: ;)
-
Now you're just spoiling them Mr Drane :D
-
I love that knot as a finisher. He forgot to add his own blog that has a ton of resources on it:
<a href="http://stormdrane.blogspot.com">Stormdrane's Blog</a>
-
@stealth007s said:
I love that knot as a finisher. He forgot to add his own blog that has a ton of resources on it:<a href="http://stormdrane.blogspot.com">Stormdrane's Blog</a>
True, and it is a wonderful blog

-
Looks like I will have to order parachute cord as the only local shops in our area (2 stores) have very limited choices.
The Outdoorsman said they ordered more before Thanksgiving and not seen their shipment. They have a speckled green or white in a rough outer braid - ugly, more for utility rope. They do have a smaller and a really thin cord in mostly subdued colors. They did have plenty of pink or pink-red normal sized cord.
D & B Supply has the normal size in white, red, and black.
Had ordered some parachute cord a while back that was supposed to be the real deal. Ended up with a colorful outer shell filled with pithy junk. Is why I dislike ordering online.
-
@Xelkos said:
Looks like I will have to order parachute cord as the only local shops in our area (2 stores) have very limited choices.The Outdoorsman said they ordered more before Thanksgiving and not seen their shipment. They have a speckled green or white in a rough outer braid - ugly, more for utility rope. They do have a smaller and a really thin cord in mostly subdued colors. They did have plenty of pink or pink-red normal sized cord.
D & B Supply has the normal size in white, red, and black.
Had ordered some parachute cord a while back that was supposed to be the real deal. Ended up with a colorful outer shell filled with pithy junk. Is why I dislike ordering online.
Supply Captain has the best deal at $7 for 100 ft. The reflective & GID tracer cord is a bit more but still reasonable.
-
@Xelkos said:
I like this lanyard that Donald made for his Wenger SI. Am assuming that is one-piece of paracord, and wonder how one makes something like that.
That one is shown as knot #787 in 'The Ashley Book of Knots'(ABoK) and goes by many different names including some of these listed in Ashley's book: the sailor's knife lanyard knot, marlingspike lanyard knot, single-strand diamond knot, two-strand diamond knot, bosun's whistle knot, boatswain's whistle knot, button knot, and just plain 'lanyard knot'. Lots of tutorials online to tie it and seeing it done from different perspectives can help when just one sometimes isn't enough.
Here's a short <u>video</u> showing the way I learned to tie it. :)
I wonder how many of us learned to tie that knot from your tutorials Stromdrane?
I know I did!
-
@DaveK said:
I wonder how many of us learned to tie that knot from your tutorials Stromdrane?I know I did!
That video has almost 475,000 views, so maybe it helped a couple of folks, although there are 74 thumbs down, so not everyone gets it, lol... :D
Here's a Marbles G.I. Utility Knife & olive drab paracord lanyard, with cat's paw, knife lanyard knot, and extended two-strand Matthew Walker knot...

-
Is there a recommended hard-copy book that y'all would recommend for knot tying and para-cord weaving?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login