What's your latest flashlight?
-
I just got a Sunwayman M11R Sirius - but the XM-L has been removed, and replaced with 3 High CRI Nichia 219's :D
Holy Lumens!! I'd LOVE that one! Quality over quantity with those lumens.

Some torch porn for you then :)
With it's little brother, an Olight S10 Ti, modded with a High CRI 219 aswell.

And one more, since this is MT.O after all :D, with their Ti pocket buddy:
Nice! What is the beam like with that tripple set up? I've not been following lights so closely lately, is that a standard tripple optic, or something more special? I'm thinking maybe a little diffusion film, might be nice. I'd really like a small tripple Nicha 219 setup like that. Thanks for the pics!

It's a standard Carclo optic. All you get is one big fat hotspot 8) no need for diffusion film.
-
Very nice... I have a triple in a 6P body and I get the same kind of beam. Very useful too

-
Simon, care to share your source for that? I'm curious about something like that. Preferably a P60 drop in, with a 3 - 9 volt range for the driver. I've got an L2X extended I want to get a high output module for. I have a LumensFactory HCRI 3 mode XPG in it now, but I'm planning on getting another 1x18650 host for it (still undecided between a P1, L2M, and L2N; any input on those would be appreciated), for biking use. Probably to replace my old Jet III Pro ST that's on the top of my helmet now.
Thanks!

(Oh, and I bow to your superior torch-fu! I'd use an emoticon, but I don't know the code for the "we're not worthy" smiley! :D )
-
@Heinz Doofenshmirtz said:
Simon, care to share your source for that? I'm curious about something like that. Preferably a P60 drop in, with a 3 - 9 volt range for the driver. I've got an L2X extended I want to get a high output module for. I have a LumensFactory HCRI 3 mode XPG in it now, but I'm planning on getting another 1x18650 host for it (still undecided between a P1, L2M, and L2N; any input on those would be appreciated), for biking use. Probably to replace my old Jet III Pro ST that's on the top of my helmet now.Thanks!

(Oh, and I bow to your superior torch-fu! I'd use an emoticon, but I don't know the code for the "we're not worthy" smiley! :D )

any help?
:D
-
@Heinz Doofenshmirtz said:
Simon, care to share your source for that? I'm curious about something like that. Preferably a P60 drop in, with a 3 - 9 volt range for the driver. I've got an L2X extended I want to get a high output module for. I have a LumensFactory HCRI 3 mode XPG in it now, but I'm planning on getting another 1x18650 host for it (still undecided between a P1, L2M, and L2N; any input on those would be appreciated), for biking use. Probably to replace my old Jet III Pro ST that's on the top of my helmet now.
Thanks!

(Oh, and I bow to your superior torch-fu! I'd use an emoticon, but I don't know the code for the "we're not worthy" smiley! :D )

any help?
:D
Sweet! Gonna copy that and keep it on a sticky note on my desktop for future use!
-
@nuphoria said:
Very nice... I have a triple in a 6P body and I get the same kind of beam. Very useful too
Nice I just got the new EDC+ Tripple drop-in and I'm hoping it works well in a C2. Awesome deal on cpfm, but I think the first run has sold out. I have a couple large tripples but a P60 Tripple should be a bit more pocket friendly.
Still I want a nice EDC HCRI Tripple like that M11R, I may have to get a M61-219 to hold me over.
-
Very nice... I have a triple in a 6P body and I get the same kind of beam. Very useful too

Nice I just got the new EDC+ Tripple drop-in and I'm hoping it works well in a C2. Awesome deal on cpfm, but I think the first run has sold out. I have a couple large tripples but a P60 Tripple should be a bit more pocket friendly.
Still I want a nice EDC HCRI Tripple like that M11R, I may have to get a M61-219 to hold me over.
There's a lot of rumoring on another forum that there will be a 2nd-gen Nichia 219 version of the EDC+ dropin. That's the one I'm going to buy :D
-
Sure wished there was a way to upgrade the LED mechanism in my Leatherman Monarch 500 SS light.


Still works, just not as bright as other lights available.
-
@Xelkos said:
Sure wished there was a way to upgrade the LED mechanism in my Leatherman Monarch 500 SS light.

Still works, just not as bright as other lights available.
It wouldn't be too hard to upgrade that.
If you're a CPF member, have a chat with Vinhngyuen54 (I've probably spelled that wrong, but it's close enough) - he's a legend with modifying and upgrading all sorts of lights.
-
Finally pulled the pin and ordered an Ti Eagletac D25A Clicky. I need a new flashlight like I need a hole in the head. I just couldn't resist, it's Titanium


-
@wndrstrck said:
Finally pulled the pin and ordered an Ti Eagletac D25A Clicky. I need a new flashlight like I need a hole in the head. I just couldn't resist, it's Titanium
Nice. I've been eyeing that one off for a while too. I read somewhere it has a very very low low.
-
Ti does have an extra pull factor me too!
Is it only direct drive on high when you use lithiums?
-
I do like the look of the D25A Clicky as well. Ti will be very nice I'm sure but I'd be happy with a plain old aluminium one myself. :)
-
Continuing with the D25A Ti discussion - just grabbed this used D25A Ti Mini. Stoked!

-
As beautiful as ti lights are, I can't ever see myself buying one. It's just such a poor heat conductor, I'd constantly live in fear I'd fry the emitter.
-
@Heinz Doofenshmirtz said:
As beautiful as ti lights are, I can't ever see myself buying one. It's just such a poor heat conductor, I'd constantly live in fear I'd fry the emitter.If it's been properly designed, then there's no need to worry.
Ti's big Plus it can take an absolute flogging and still look pretty. For an EDC that's pretty valuable - and most EDC lights aren't heavily driven.
Buy one. Hold it, caress it. Then buy lots more and discover all your Al lights have dust on them :D
-
I'll add a caveat - don't buy a Ti twisty light if you intend to switch it on and off a lot, as (almost) all Ti/Ti threads have some degree of roughness due to galling, especially when under tension from the spring and battery.
I have a couple of Ti twisties I purchased before I found this out (and yes, I did the polishing and twisting thing thousands of times, added special "Ti" grease, still didn't like the feel).
-
I have a Fenix E01. It rocks for a small flashlight, way better than I thought it would be. Still, there are cheaper, likely more versatile options out there IMHO. I don't use mine very much.
I picked up an oh-so-classic Streamlight Stylus Pro a few weeks back. I like it, I'm just having trouble integrating it into my loadout however. It doesn't sit so well in the pocket of my jeans because it's so long. I like not noticing my tools are on me. I'm looking into the miniature version as we speak..
-
Maratac AA in natural Al. finish, nice light for my backup EDC?
-
@bendbig said:
Maratac AA in natural Al. finish, nice light for my backup EDC?Yep, nice little light. I have a few and use one regularly. Put an Eveready L91 battery (primary lithium, not rechargeable) in it and it will still be ready to use in 5 years time. I do suggest annual checks to make sure it will work when you need it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login