And so it begins.... (My adventures into Alox!)
-
I'm doing black tools and springs soon. I just never seem to get the time to prep the parts for the BO.
;)I know I know! The problem is those springs I got made up need a significant amount of sanding to be usable like a good half hour each, so I have to prepare them all to that level for BO'ing, as well as sand the stock ones to the same level so they texture match... so basically its like 10 hours of sanding ahead of me just to do the BO run... I haven't been super excited to get that done, but I will start!
I did ask more about his process last time I was in though. He sandblasts to surface prep... I guess that helps expose the surface on stainless. Maybe Vic BO skips that step since their BO well.. isnt very good as you know.
-
I'm anxiously looking forward to your custom 91mm alox scales. This range bursts of available tools.

-
Me too. :D
The 91mm alox scales will open endless variations of new cool SAK's. -
What do you think would be better for 91mm alox. Scales that are the same as the cellidor, that you press on, or more like 93mm alox with exposed holes?
I can see pros and cons to both.
The con of just pressing on alox scales is that the inner liners arent upgraded to alox style nickel silver. The pro is its easy and anyone can do it.
The con of exposed screws or rivets is that its no longer a DIY job for anyone except people with tools. The pro is that it looks nicer and you have to take the SAK apart so liners can get upgraded too...
Oh also exposed type means the SAK will be 2 liners thinner since we no longer need the outer liners under the scales.
-
Alox style definitely.
-
Alox style also for me.
-
Ya that makes sense. I agree.
It wont be exactly symmetrical like a 93, but I would expose the end pivots and the backtool pivot, and keep the hinge pin hidden. I think that's the best a 91mm will ever look dressed in alox :D
-
I'd like to see if/how well a cellidor scale model would work with those torx pins of yours. I may have to give that a shot once I get my modding legs. I can already tell from practicing that I'm not going to be a huge fan of peening
-
I'd want the exposed Alox type too, especially if it means you can easily DIY stuff

-
Maybe the possibility of both? Sounds weird I know but I have an idea. Pm me and I will explain I you like :)
-
@tattoosteve99 said:
Maybe the possibility of both? Sounds weird I know but I have an idea. Pm me and I will explain I you like :)Nevermind. Brain fart lol
-
I picked up a florist SAK a while back for the sheepsfoot blade. The idea is that I want to make an alox whittler and figured I'd give that blade a try.
PTRSAK already said the pivot hole was larger than normal, and it sure it. Must be somewhere around 3.5mm or a bit bigger even as my 1/8 pivots are too small.
Anyways, so this means it needs a bushing. I took some 1/8 brass rod stock and put it through and beat it until it spread out and filled the gap. No need to peen if you try this, just hit flat and hard as you want to mushroom the pin itself inside the gap. I trimmed the ends off with my jewelers saw and then sanded flush. Now to carefully drill a hole the right size and we're in business.
-
Wow, that looks super clean.
-
very usefull info Robert! i was planning to open my gardener but i have no pins for that, i kwon it now ;)

-
@Syph007 said:
I picked up a florist SAK a while back for the sheepsfoot blade. The idea is that I want to make an alox whittler and figured I'd give that blade a try.PTRSAK already said the pivot hole was larger than normal, and it sure it. Must be somewhere around 3.5mm or a bit bigger even as my 1/8 pivots are too small.
Anyways, so this means it needs a bushing. I took some 1/8 brass rod stock and put it through and beat it until it spread out and filled the gap. No need to peen if you try this, just hit flat and hard as you want to mushroom the pin itself inside the gap. I trimmed the ends off with my jewelers saw and then sanded flush. Now to carefully drill a hole the right size and we're in business.
That is an awesome sheepsfoot blade. Is it possible to still buy them?
-
4 hole alox style would be just fine!
-
The other benefit of the Alox type scales for a 91 is the reduced thickness.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login